深圳市美华安规仪器有限公司
地址: A. 深圳光明新区光明
圳美311号/518107
B. 东莞大岭山镇渭
溪路/523829
热线: 155-0203-6348;
136-1283-4185
电话: 0755-3288-5887
传真: 0755-3288-5887
Q Q: 1-4848-7-5858;
4-9327-8805
邮箱: sm#ag17.wang
okgang#163.com
(#请改@)
官网: www.ag17.wang
论坛: bbs.ag17.wang
安规网的工程师出差见到不少工厂和中小型实验使用的盐雾试验箱参考书的GB标准还是旧版,有些还在参考JIS标准,IEC旧版翻译过来的标准。告诉小伙伴们,最新盐雾试验箱参考GB/T10125-2012标准已经出来了,引用及他们的复杂性导致出了不少亲戚。到底有多少亲戚请看以下:
【参考文献】
[1] ISO 1456:2003,Metalliccoatings—Electrodeposited coatings of nickel plus chromium and of coper plusnickel plus chromium
[2] ISO 1458:2002,Metalliccoatings—Electrodeposited coatings of nickel
[3] ISO 1513:1992,Paints andvarnishes—Examination and preparation of samples for testing
[4] ISO 3270:1984,Paints and varnishes and theirraw materials—Temperatures and humidities for conditioning and testing
[5] ISO 3613:2000,Chromate conversion coatingson zinc,cadmium,aluminium-zinc alloys and zinc-aluminium alloys—Test methods
[6] ISO 3696:1987,Water for analyticallaboratory use—Sepcification and test methods
[7] ISO 4520:1981,Chromate conversion coatingson electroplated zinc and cadmium coatings
[8] ISO 4527:2003,Metalliccoating—Autocatalytic(electroless)nickel-phosphorus alloy coatingsSpecification and test methods
[9] ISO 4628-1:2003,Paints andvarnishes—Evaluation of degradation of coatings—Designation of quantity andsize of defects,and of intensity lf uniform changes in appearance—Part1:General introduction and designation system
[10] ISO 4628-2:2003,Paints andvarnishes—Evaluation of degradation of coatings—Designation of quantity andsize of defects,and of intensity of uniform changes in appearance—Part2:Assessment of degree of blistering
[11] ISO 4628-3:2003,Paints and varnishes—Evaluationof degradation of coating—Designation of quantity and size of defects,and ofintensity of uniform changes in appearance—Part 3:Assessment of degree ofrusting
[12] ISO 4628-4:2003,Paints andvarnishes—Evaluation of degradation of coatings—Designation of quantity andsize of defects,and of intensity of uniform changes in appearance—Part4:Assessment of degree of cracking
[13] ISO 4628-5:2003,Paints andvarnishes—Evaluation of degradation of coating —Designation of quantity andsize of defects,and of intensity of uniform changes inappearance—Part:5Assessment of degree of flaking
[14] ISO 4628-5:2003,Paints andvarnishes—Evaluation of degradation of coatings —Designastion of quantity andsize of defects,and of intensity of uniform changes in appearance—Part8:Assessment of degree of delamination and corrosion around a scribe
[15] ISO 7253:1996,Paints andvarnishes—Determination of resistance to neutral salt spray(fog)
[16] ISO 7599:1983,Anodized of aluminium and itsalloys—General specifications for anodic oxide coatings on aluminium
[17] ISO 8993:1989,Anodized aluminium andaluminium alloys—Rating system for the evaluation of pitting corrosion—Chartmethod
[18] ISO 8994:1989,Anodized aluminium andaluminium alloys—Rating system for the evaluation of pitting corrosion—Gridmethod
[19] ISO 10289:1999,Methods for corrosiontesting of metallic and other inorganic coatings on metallic substrates—Ratingof test specimens and manufactured articles subjected to corrosion tests
[20] ISO 15528:2000,Paints,varnishes and rawmaterials for paints and varnishes—Sampling
[21] SHIGERU SUGA and SHIGEO SUGA,”Report on theresults from the ISO/TC 156/WG 7 International Round Robin Test Programme onISO 9227 Salt spray tests”;Surface Finish.Soc,Japan;Vol,56,p.28(2005)
GB/T10125-2012盐雾试验标准的关系介绍完毕,是不是有点乱。
仪器商城:www.17-18.cn
安规仪器网/美华安规仪器---追崇原创、重视知识产权和尊重劳动成果,也是行业发展主旨,禁止盗链、采集、复制及转载等非法行为,一经发现保留追责权力。有关标准和技术探讨,请联络邮箱:1484875858#qq.com(#改为@),QQ1484875858