深圳市美华安规仪器有限公司
地址: A. 深圳光明新区光明
圳美311号/518107
B. 东莞大岭山镇渭
溪路/523829
热线: 155-0203-6348;
136-1283-4185
电话: 0755-3288-5887
传真: 0755-3288-5887
Q Q: 1-4848-7-5858;
4-9327-8805
邮箱: sm#ag17.wang
okgang#163.com
(#请改@)
官网: www.ag17.wang
论坛: bbs.ag17.wang
澳洲AS/NZS 3112图3.1深度规|SAA插座不接触深度规|不接触深度测试量规|FIGURE 3.1 GAUGE FOR DEPTH OF NO-CONTACT TEST|FIGURE 3.1 Gauge
澳洲AS/NZS 3112插头插座量规汇总清单方便查询各量规: http://www.ag17.wang/product/AS_NZS3112_Gauge.html
标准:符合AS/NZS 3112-2012(或最新版)要求;
使用要求:用于扁平插片的插座孔的弹夹深度, 当用如图 3.1(a)或(b)的适当测试治具,以任何方式(无过分用力)插入插座的带电插座孔中,应不可接触带电部件. 10A/15A和20A金属插片垂直于插座面插入每个插座孔时必须在 12.6mm 深度前产生接触.
For socket-outlets with apertures intended to accommodate plugs having flat pins conforming to the dimensional requirements of Figure 2.1, the following tests shall be performed.
When the test gauge of Figure 3.1(a) or (b), as appropriate, is inserted into the socket-outlet live contact apertures in any possible manner, without undue force, contact with live parts shall not be possible.
perpendicular to the socket-outlet face, into each and every aperture for flat pins, contact shall be made before a depth of 12.6 mm is reached.
数量:依订购。
安规仪器网/美华安规仪器---追崇原创、重视知识产权和尊重劳动成果,也是行业发展主旨,禁止盗链、采集、复制及转载等非法行为,一经发现保留追责权力。