UL试验弯指|UL弯指|UL试验指|UL通用试验指|PA100A| PA100B|Articulate probe with web stop|Accessibility probe|Articulated accessibility probe|Articulate test probe|Articulated finger probe|Articulated Probe with Web St

名称：UL试验弯指|UL弯指|UL试验指|UL通用试验指|PA100A| PA100B|Articulate probe with web stop|Accessibility probe|Articulated accessibility probe|Articulate test probe|Articulated finger probe|Articulated Probe with Web Stop
标准：UL22|UL48|UL73|UL153|UL399|UL474|UL496|UL499|UL507|UL508|UL508C|UL982|UL998|UL1012|UL1017|UL1026|UL1082|UL1083

|UL1206|UL1278|UL1310|UL1573|UL1598|UL1727|UL1993|UL5085-1|UL8750|UL60065|UL60335-1|UL60950等(或最新版）要求

UL各标准试验指针棒销-汇总查询清单: http://www.ag17.wang/shiyanzhi/UL_Test_Probe_lists.html

各试验指针棒汇总和简介一览表：http://www.ag17.wang/safety/safety47.html

技术参数：

1、直指直径：12.7mm（1/2 inch ）
2、直指总长：101.6mm（4 inch）
3、头部长度：14.3mm（9/16 inch）
4、头部半径：R 4.8mm（3/16 inch )
5、尾部直径：19.1mm（3/4 inch）

用途/Apply:  家用和类似用途电器防触电保护试验的必备器具。
UL507. The probes referenced in Table 9.1 and illustrated in Figure 9.2 shall be applied to any depth that the opening permits and shall be rotated or angled before, during, and after insertion through the opening to any position that is necessary to try to contact an uninsulated live part or film-coated wire. If necessary, the configuration shall be changed after insertion through the opening. Configuration refers to positioning of the jointed portions of the probes
UL60950-1. The articulated accessibility probe of Figure EE.3 shall be inserted into each opening in the MECHANICAL ENCLOSURE, without appreciable force. The test finger shall not contact hazardous moving parts. This consideration applies to all sides of the MECHANICAL ENCLOSURE when the HOUSEHOLD AND HOME/OFFICE DOCUMENT/MEDIA SHREDDERS is mounted as intended in accordance with the manufacturer’s instructions for use. In some cases, operation of the equipment may be necessary to determine accessibility (for example, where a guard or cover is only opened after the unit is energized and ready for use) when applying both the test finger and wedge probe.
加工：本司自有数控设备精密加工，价格较低、品质可控、交期更短、服务更到位;
特点：采用进口工业级模具钢及不锈钢及高强度塑料等，具有高硬度、变形小、耐磨损、抗腐蚀、耐生锈、外观漂亮等优点；
质量：出厂前经过二次元、投影仪、数显千分尺、卡尺测量，满足标准要求及能通过第三方计量；
标识：所有型号和图号均有激光刻字，美观清晰；
数量：依订购件。