深圳市美华安规仪器有限公司
地址: A. 深圳光明新区光明
圳美311号/518107
B. 东莞大岭山镇渭
溪路/523829
热线: 155-0203-6348;
136-1283-4185
电话: 0755-3288-5887
传真: 0755-3288-5887
Q Q: 1-4848-7-5858;
4-9327-8805
邮箱: sm#ag17.wang
okgang#163.com
(#请改@)
官网: www.ag17.wang
论坛: bbs.ag17.wang
EN电磁兼容标准目录清单 安规仪器网出品, 更多标准、资料共享:http://www.ag17.wang/download/Standard_download_1.html |
EN 50065-1 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz –
Part 1: General requirements, frequency bands and electromagnetic disturbances |
EN 50065-2-1
|
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz –
Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments |
EN 50065-2-2
|
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz --
Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments |
EN 50065-2-3
|
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz --
Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors |
EN 50083-2
|
Cable networks for television signals, sound signals and interactive services --
Part 2: Electromagnetic compatibility for equipment |
EN 50090-2-2
|
Home and Building Electronic Systems (HBES) --
Part 2-2: System overview - General technical requirements |
EN 50091-2
|
Uninterruptible power systems (UPS) --
Part 2: EMC requirements |
EN 50130-4
|
Alarm systems --
Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems |
EN 50148 |
Electronic taximeters |
EN 50199 |
Electromagnetic compatibility (EMC) - Product standard for arc welding equipment |
EN 50263
|
Electromagnetic compatibility (EMC) - Product standard for measuring relays and protection equipment |
EN 50270
|
Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
EN 50293 |
Electromagnetic compatibility - Road traffic signal systems - Product standard |
EN 50295
|
Low-voltage switchgear and controlgear - Controller and device interface systems - Actuator Sensor interface (AS-i) |
EN 50370-2
|
Electromagnetic compatibility (EMC) - Product family standard for machine tools --
Part 2: Immunity |
EN 55011
|
Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement |
EN 55012
|
Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics - Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices |
EN 55013
|
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement |
EN 55014-1
|
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 1: Emission |
EN 55014-2
|
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 2: Immunity - Product family standard |
EN 55015
|
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
EN 55020
|
Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement |
EN 55022
|
Limits and methods of measurement of radio disturbance characteristics of information technology equipment |
EN 55022
|
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
EN 55024
|
Information technology equipment - Immunity characteristics - Limits and methods of measurement |
EN 55103-1
|
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use --
Part 1: Emission |
EN 55103-2
|
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use --
Part 2: Immunity |
EN 60034-1
|
Rotating electrical machines --
Part 1: Rating and performance |
EN 60204-31
|
Safety of machinery - Electrical equipment of machines --
Part 31: Particular safety and EMC requirements for sewing machines, units and systems |
EN 60439-1
|
Low-voltage switchgear and controlgear assemblies --
Part 1: Type-tested and partially type-tested assemblies |
EN 60521 |
Class 0,5, 1 and 2 alternating-current watt-hour meters |
EN 60669-2-1
|
Switches for household and similar fixed-electrical installations --
Part 2: Particular requirements –
Section 1: Electronic switches |
EN 60669-2-1
|
Switches for household and similar fixed electrical installations --
Part 2-1: Particular requirements - Electronic switches |
EN 60669-2-2
|
Switches for household and similar fixed electrical installations --
Part 2: Particular requirements --
Section 2: Electromagnetic remote-control switches (RCS) |
EN 60669-2-3
|
Switches for household and similar fixed electrical installations --
Part 2-3: Particular requirements - Time-delay switches (TDS) |
EN 60687 |
Alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S) |
EN 60730-1
|
Automatic electrical controls for household and similar use
Part 1: General requirements |
EN 60730-1
|
Automatic electrical controls for household and similar use Part 1: General requirements |
EN 60730-2-5
|
Automatic electrical controls for household and similar use
Part 2: Particular requirements for automatic electrical burner control systems |
EN 60730-2-6
|
Automatic electrical controls for household and similar use
Part 2: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
EN 60730-2-7
|
Automatic electrical controls for household and similar use
Part 2: Particular requirements for timers and time switches |
EN 60730-2-8
|
Automatic electrical controls for household and similar use
Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements |
EN 60730-2-9
|
Automatic electrical controls for household and similar use
Part 2-9: Particular requirements for temperature sensing controls |
EN 60730-2-11
|
Automatic electrical controls for household and similar use
Part 2: Particular requirements for energy regulators |
EN 60730-2-13
|
Automatic electrical controls for household and similar use
Part 2-13: Particular requirements for humidity sensing controls |
EN 60730-2-14
|
Automatic electrical controls for household and similar use
Part 2-14: Particular requirements for electric actuators |
EN 60730-2-18
|
Automatic electrical controls for household and similar use
Part 2: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements |
EN 60870-2-1
|
Telecontrol equipment and systems --
Part 2: Operating conditions --
Section 1: Power supply and electromagnetic compatibility |
EN 60945
|
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
EN 60947-1
|
Low-voltage switchgear and controlgear --
Part 1: General rules |
EN 60947-2
|
Low-voltage switchgear and controlgear --
Part 2: Circuit-breakers |
EN 60947-3
|
Low-voltage switchgear and controlgear --
Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units |
EN 60947-4-1
|
Low-voltage switchgear and controlgear -- Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
EN 60947-4-2
|
Low-voltage switchgear and controlgear --
Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters |
EN 60947-4-3
|
Low-voltage switchgear and controlgear --
Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads |
EN 60947-5-1
|
Low-voltage switchgear and controlgear --
Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices |
EN 60947-5-2
|
Low-voltage switchgear and controlgear --
Part 5-2: Control circuit devices and switching elements - Proximity switches |
EN 60947-5-3
|
Low-voltage switchgear and controlgear --
Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF) |
EN 60947-5-6
|
Low-voltage switchgear and controlgear --
Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR) |
EN 60947-5-7
|
Low-voltage switchgear and controlgear --
Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output |
EN 60947-6-1
|
Low-voltage switchgear and controlgear --
Part 6-1: Multiple function equipment - Automatic transfer switching equipment |
EN 60947-6-2
|
Low-voltage switchgear and controlgear --
Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) |
EN 60947-8
|
Low-voltage switchgear and controlgear --
Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines |
EN 60974-10
|
Arc welding equipment --
Part 10: Electromagnetic compatibility (EMC) requirements |
EN 61000-3-2
|
Electromagnetic compatibility (EMC) --
Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase) |
EN 61000-3-3
|
Electromagnetic compatibility (EMC) --
Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection |
EN61000-3-11
|
Electromagnetic compatibility (EMC) --
Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection |
EN 61000-6-1
|
Electromagnetic compatibility (EMC) --
Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
EN 61000-6-2
|
Electromagnetic compatibility (EMC) --
Part 6-2: Generic standards - Immunity for industrial environments |
EN 61000-6-3
|
Electromagnetic compatibility (EMC) --
Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
EN 61000-6-4
|
Electromagnetic compatibility (EMC) --
Part 6-4: Generic standards - Emission standard for industrial environments |
EN 61008-1 |
Electrical accessories - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB''s) -- Part 1: General rules |
EN 61009-1
|
Electrical accessories - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO''s) --
Part 1: General rules |
EN 61036 |
Alternating current static watt-hour meters for active energy (classes 1 and 2) |
EN 61037
|
Electricity metering - Tariff and load control - Particular requirements for electronic ripple control receivers |
EN 61038 |
Electricity metering - Tariff and load controls - Particular requirements for time switches |
EN 61131-2
|
Programmable controllers --
Part 2: Equipment requirements and tests |
EN 61131-2
|
Programmable controllers --
Part 2: Equipment requirements and tests |
EN 61204-3
|
Low voltage power supplies, d.c. output --
Part 3: Electromagnetic compatibility (EMC) |
EN 61268 |
Alternating current static var-hour meters for reactive energy (classes 2 and 3) |
EN 61326 |
Electrical equipment for measurement, control and laboratory use - EMC requirements |
EN 61543
|
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility |
EN 61547 |
Equipment for general lighting purposes - EMC immunity requirements |
EN 61800-3
|
Adjustable speed electrical power drive systems --
Part 3: EMC product standard including specific test methods |
EN 61812-1
|
Specified time relays for industrial use --
Part 1: Requirements and tests |
EN 62052-11
|
Electricity metering equipment (AC) - General requirements, tests and test conditions --
Part 11: Metering equipment Note 9 |
EN 62053-11
|
Electricity metering equipment (a.c.) - Particular requirements --
Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2) |
EN 62053-21
|
Electricity metering equipment (a.c.) - Particular requirements --
Part 21: Static meters for active energy (classes 1 and 2) |
EN 62053-22
|
Electricity metering equipment (a.c.) - Particular requirements --
Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) |
EN 62053-23
|
Electricity metering equipment (a.c.) - Particular requirements --
Part 23: Static meters for reactive energy (classes 2 and 3) |
EN 12015
|
Electromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors - Emission |
EN 12016
|
Electromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors - Immunity |
EN 12895 |
Industrial trucks - Electromagnetic compatibility |
EN 13309
|
Construction machinery - Electromagnetic compatibility of machines with internal electrical power supply |
EN 300 386 V.1.2.1
|
Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements |
EN 300 386V.1.3.1
|
Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements |
EN 300 386V.1.3.2
|
Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements |
EN 300 386-2 V1.1.3
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements; Part 2: Product family standard |
EN ISO 14982
|
Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998 |
EN 50065-1 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz –
Part 1: General requirements, frequency bands and electromagnetic disturbances |
EN 50065-2-1
|
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz –
Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments |
EN 50065-2-2
|
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz --
Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments |
EN 50065-2-3
|
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors |
仪器商城:www.17-18.cn
安规仪器网/美华安规仪器---追崇原创、重视知识产权和尊重劳动成果,也是行业发展主旨,禁止盗链、采集、复制及转载等非法行为,一经发现保留追责权力。有关标准和技术探讨,请联络邮箱:1484875858#qq.com(#改为@),QQ1484875858