深圳市美华安规仪器有限公司
地址: A. 深圳光明新区光明
圳美311号/518107
B. 东莞大岭山镇渭
溪路/523829
热线: 155-0203-6348;
136-1283-4185
电话: 0755-3288-5887
传真: 0755-3288-5887
Q Q: 1-4848-7-5858;
4-9327-8805
邮箱: sm#ag17.wang
okgang#163.com
(#请改@)
官网: www.ag17.wang
论坛: bbs.ag17.wang
编号 | 中文名称 | 英文名称 |
---|---|---|
BIP 0007-2004 | 通信电缆和设备安装.要求和可靠性指南 | Telecommunication cabling and equipment installations - A Guide to requirements and responsibilities |
BS 1858-2002 | 电缆.附件.沥青基填充化合物 | Electric cables - Accessories - Bitumen-based filling compounds |
BS 196-1961 | 电压达250V单相交流电路用带接地线的保护式不可反转插头、插座电缆藕合器与设备藕合器规范 | Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts |
BS 2316 Pts.1 & 2-1968 | 射频电缆规范.第1部分:一般要求与试验.第2部分:英国政府公用设施要求 | Specification for radio-frequency cables. General requirements and tests. British Government Services requirements |
BS 2484-1985 | 混凝土与粘土制直形电缆沟盖板规范 | Specification for straight concrete and clayware cable covers |
BS 2562-1979 | 变压器与电抗器用电缆箱规范 | Specification for cable boxes for transformers and reactors |
BS 2E 21-1957 | 飞行器用普兰式电缆 | Pren type electric cables for aircraft |
BS 2G 180-1974 | 飞行器用电缆固定编接规范 | Specification for permanent splicing of aircraft electrical cables |
BS 2G 215-1-1985 | 飞机镍-铬和镍-铝热电偶延伸电缆.第1部分:导线规范 | Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft - Specification for conductors |
BS 2G 215-2-1989 | 飞机镍-铬和镍-铝热电偶延伸电缆.第2部分:终端规范 | Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft - Specification for terminations |
BS 2G 221-1980 | 米尼氏电缆(米制)规范 | Specification for Minyvin type electric cables (metric units) |
BS 2G 223-1989 | 飞行器电缆用屏蔽端接装置规范 | Specification for screen terminating devices for aircraft electric cables |
BS 2G 232-1987 | 普通飞机机体或设备互连用(135℃)绕扎绝缘电缆规范 | Specification for electric cables for general airframe or equipment interconnect use (135 °C), wrapped insulation |
BS 2G 238-1996 | 普通机体或设备互连用(260℃)镀镍铜和铜合金导线绕扎绝缘电缆规范 | Specification for electric cables for general airframe or equipment interconnect use (260 °C), nickel plated copper and copper alloy conductors, with wrapped insulation |
BS 3454-1995 | 煤矿用的1.9/3.3kV、300A螺栓连接防火电缆连接器和适配器规范(包括380/660V和640/1100V,300A适配器)规范 | Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors) for use in coal mines |
BS 3858-1992 | 电缆和电线用捆扎和识别套管规范 | Specification for binding and identification sleeves for use on electric cables and wires |
BS 3905-1995 | 煤矿用3.8/6.6 KV、300 A螺栓连接防火电缆连接器和适配器规范 | Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines |
BS 3988-1970 | 电气用锻铝规范.绝缘电缆用实芯导线 | Specification for wrought aluminium for electrical purposes - Solid conductors for insulated cables |
BS 3G 197-1982 | 飞行器用电缆终端的螺柱式接线合规范 | Specification for stud-type terminal blocks for terminations on aircraft electric cables |
BS 3G 198-2-1997 | 飞机电缆和设备电线用套管.第2部分:套管识别标签规范 | Sleeves for aircraft electric cables and equipment wires - Specification for slip-on sleeves for identification purposes |
BS 3G 198-4-1996 | 飞机电缆和设备电线套管.第4部分:粘结和绝缘用碳氟化合物热收缩套管规范 | Sleeves for aircraft electric cables and equipment wires - Specification for fluoropolymer heat shrinkable sleeving for binding and insulation |
BS 3G 210-1996 | 单芯和多芯镀银铜导体(190℃)或镀镍铜导体(260℃)聚四氟乙烯绝缘设备软线和电缆规范 | Specification for PTFE insulated equipment wires and cables, single- and multi-core, with silver plated copper conductors (190 °C) or nickel plated copper conductors (260 °C) |
BS 3G 231-1997 | 通用航空电缆和航空航天应用导电体规范 | Specification for conductors for general-purpose aircraft electrical cables and aerospace applications |
BS 3G 233-1990 | 普通机体或设备互连用(135℃)挤制绝缘电缆规范 | Specification for electric cables for general airframe or equipment interconnect use (135 °C), extruded insulation |
BS 4553-1-1998 | 600/1000V单相分芯同轴电缆规范.第1部分:带聚氯乙烯绝缘层的电缆 | Specification for 600/1000 V single-phase split concentric electric cables - Cables having PVC insulation |
BS 4553-2-1998 | 600/1000V单相分芯同轴电缆规范.第2部分:带热固绝缘层的电缆 | Specification for 600/1000 V single-phase split concentric electric cables - Cables having thermosetting insulation |
BS 4553-3-1998 | 600/1000V单相分芯同轴电缆规范.第3部分:带热固绝缘层和遇火有低发散烟雾和腐蚀性气体的电缆 | Specification for 600/1000 V single-phase split concentric electric cables - Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire |
BS 4579-2-1973 | 电缆和电线连接器机械和压合接头性能规范.第2部分:镍、铁及镀铜导线压合接头 | Specification for performance of mechanical and compression joints in electric cable and wire connectors - Compression joints in nickel, iron and plated copper conductors |
BS 4678-1-1971 | 电缆管道.第1部分:钢制地表管道规范 | Cable trunking - Steel surface trunking |
BS 4678-2-1973 | 电缆管道.第2部分:钢制地板下管道规范 | Cable trunking - Steel underfloor (duct) trunking |
BS 4678-4-1982 | 电缆管道.第4部分:绝缘材料制电缆管道规范 | Cable trunking - Specification for cable trunking made of insulating material |
BS 4727 Pt.2 Group 08-1986 | 电工、电力、电信、电子学、照明和颜色术语词汇.第2部分:电力工程专用术语.第08集:电缆术语 | Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Electric cable terminology |
BS 4727-2 Group 08-1994 | 电工、电力、电信、电子学、照明和颜色术语.第2部分:电力工程专用术语.第08集:电缆术语 | Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms - Terms particular to power engineering - Electric cables |
BS 4737-3.30-1986 | 擅入者报警系统.第3部分:元部件规范.第30节:接线用聚氯乙烯绝缘电缆规范 | Intruder alarm systems - Specifications for components - Specification for PVC insulated cables for interconnecting wiring |
BS 4808-1-1972 | 电信用带聚氯乙烯绝缘和聚氯乙烯绝缘护套的低频电线及电缆规范.第1部分:一般要求和试验 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - General requirements and tests |
BS 4808-2-1972 | 电信用带聚氯乙烯绝缘和聚氯乙烯绝缘护套的低频电线及电缆规范.第2部分:单股无屏蔽实心或绞合设备线 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Equipment wires with solid or stranded conductors, unscreened, single |
BS 4808-3-1972 | 电信用带聚氯乙烯绝缘和聚氯乙烯绝缘护套的低频电线及电缆规范.第3部分:单股屏蔽实心或绞合设备线和电缆 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Cables and equipment wires, with solid or stranded conductors, screened, single |
BS 4808-4-1974 | 电信用带聚氯乙烯绝缘和聚氯乙烯绝缘护套的低频电线及电缆规范.第4部分:双股、三股、四股和五股无屏蔽实心 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Equipment wires with solid or stranded conductors, unscreened, in pairs, triples, quads and quintuples |
BS 4808-5-1973 | 电信用带聚氯乙烯绝缘和聚氯乙烯绝缘护套的低频电线及电缆规范.第5部分:双股屏蔽护套实心或绞合线电缆 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Cables with solid or stranded conductors, screened and sheathed, one pair |
BS 4937-30-1993 | 国际热耦基准表.第30部分:延伸和补偿电缆.公差和标识制度 | International thermocouple reference tables - Extension and compensating cables - Tolerances and identification system |
BS 4G 178-2-1986 | 飞机电缆电线压接头.第2部分:压接检验规范(包括用户检验试验) | Crimped joints for aircraft electrical cables and wires - Specification for control of crimping (including user control tests) |
BS 4G 198-1-1997 | 飞机电器电缆和设备导线用套管.第1部分:连接和识别用橡胶套管规范 | Sleeves for aircraft electric cables and equipment wires - Specification for elastomeric sleeves for binding and identification |
BS 4G 198-3-1999 | 飞行器电缆和设备导线的套管和模制元件.连接、绝缘和标识用的热收缩套管规范 | Sleeves and moulded components for aircraft electric cables and equipment wires - Specification for heat-shrinkable sleeving for binding, insulation, and identification |
BS 5099-2004 | 电缆.火花试验电压级 | Electric cables - Voltage levels for spark testing |
BS 5308-1-1986 | 仪器用电缆.第1部分:聚乙烯绝缘电缆规范 | Instrumentation cables - Specification for polyethylene insulated cables |
BS 5308-2-1986 | 仪器用电缆.第2部分:聚氯乙烯绝缘电缆规范 | Instrumentation cables - Specification for PVC insulated cables |
BS 5372-1997 | 额定电压为600/1000V和1900/3700V的铜或铝导体多芯挤制固体电介质绝缘电缆终端的尺寸规范 | Specification for dimensions of cable terminations for multi-core extruded solid dielectric insulated distribution cables of rated voltages 600/1000 V and 1900/3300 V having copper or aluminium conductors |
BS 542-1973 | 矿井和采石场设备用电缆密封装置和密封盒规范 | Specification for cable glands and sealing boxes for association with apparatus for use at mines and quarries |
BS 5G 178-1-1993 | 飞机电缆和电线用压合连接器.第1部分::元件和工具设计要求(包括试验)规范 | Crimped joints for aircraft electrical cables and wires - Specification for design requirements (including tests) for components and tools |
BS 6004-2000 | 电缆.电力、照明和内部布线用电压不超过450/750V(含450/750V)的PVC绝缘非铠装电缆 | Electric cables - PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring |
BS 6007-2000 | 电缆.内部布线用电压不超过450/750V(含450/750V)的单芯未包覆绝热电缆 | Electric cables - Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring |
BS 6007-2006 | 电缆.内部布线用电压不超过450/750V(含450/750V)的单芯非铠装耐热电缆 | Electric cables - Single core unsheathed heat resisting cables forvoltages up to and including 450/750 V, for internal wiring |
BS 6121-1-2005 | 机械电缆密封套.铠装密封套.要求和试验方法 | Mechanical cable glands - Armour glands - Requirements and test methods |
BS 6121-5-2005 | 机械电缆密封套.电缆密封套和铠装密封套的选择、安装和检验的实施规范 | Mechanical cable glands - Code of practice for selection, installation and inspection of cable glands and armour glands |
BS 6207-3-2001 | 额定电压不超过750V的矿物绝缘电缆.使用指南 | Mineral insulated cables with a rated voltage not exceeding 750 V. Guide to use |
BS 6234-1987 | 电缆的聚乙烯绝缘包覆层规范 | Specification for polyethylene insulation and sheath of electric cables |
BS 638-4-1996 | 电弧焊电源、设备和附件.第4部分:焊接电缆规范 | Arc welding power sources, equipment and accessories - Specification for welding cables |
BS 6387-1994 | 在火灾情况下保持电路完好的电缆性能要求规范 | Specification for performance requirements for cables required to maintain circuit integrity under fire conditions |
BS 6435-1984 | 变压器与电抗线圈的高压电缆干燥端子用未充填护套规范 | Specification for unfilled enclosures for the dry termination of HV cables for transformers and reactors |
BS 6436-1984 | 电缆箱或分电站连接用接地配电变压器规范 | Specification for ground mounted distribution transformers for cable box or unit substation connection |
BS 6469-99.1-1992 | 电缆的绝缘和护套材料.第99部分:应用于英国但不规定在BS EN 60811标准和BS 6469标准其他部分的试验方法,.第 | Insulating and sheathing materials of electric cables - Test methods used in the United Kingdom but not specified in BS EN 60811: Non-electrical tests |
BS 6469-99.2-1992 | 电缆的绝缘和护套材料.第99部分:用于英国的试验方法,但不规定在BS EN 60811或BS 6469的其它部分中.第2节:电 | Insulating and sheathing materials of electric cables - Test methods used in the United Kingdom but not specified in BS EN 60811 or other Parts of BS 6469: Electrical tests |
BS 6480-1988 | 额定电压在33KV及以下的铅与铅合金护套浸渍纸绝缘的电缆规范 | Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V |
BS 6500-2000 | 电缆.家庭,办公室和类似环境用的装置和设备使用的额定电压在300/500V以下的柔性电缆 | Electric cables - Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments |
BS 6513-1-1984 | 宽带电缆配电系统.第1部分:术语词汇 | Wideband cabled distribution systems - Glossary of terms |
BS 6513-2-1984 | 宽带电缆配电系统.第2部分:测量方法 | Wideband cabled distribution systems - Methods of measurement |
BS 6513-4-1984 | 宽带电缆配电系统.第4部分:逆向电视机性能要求规范 | Wideband cabled distribution systems - Specification for performance requirements, for upstream television |
BS 6513-5-1987 | 宽带电缆的配电系统.第5部分:单向和相互作用的数据使用推荐标准 | Wideband cabled distribution systems - Recommendations for one-way and interactive data services |
BS 6622-1999 | 额定电压范围为(3800~6600)V和(19000~33000)V,有挤压交叉连接的聚乙烯或乙烯丙烯橡胶绝缘层的电缆规范 | Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV |
BS 6701-2004 | 电信设备和电信电缆敷设.安装、运行和维护规范 | Telecommunications equipment and telecommunications cabling - Specification for installation, operation and maintenance |
BS 6708-1998 | 矿井和露天矿用挠性电缆 | Flexible cables for use at mines and quarries |
BS 6724-1997 | 采用热固绝缘和受火情影响时散发出少量烟雾和腐蚀气体的600/1000V和1900/3300V铠装电缆规范 | Electric cables - Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V, having low emission of smoke and corrosive gases when affected by fire |
BS 6883-1999 | 船舶和活动式与固定式近海设备中固定布线用的弹性绝缘电缆.要求和试验方法 | Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units - Requirements and test methods |
BS 6904-1987 | 额定电压等于或高于72.5kV的气体绝缘金属封闭式开关装置用电缆连接件指南 | Guide for cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above |
BS 6910-1-1988 | 电压范围为交流1000V 和直流1500V 的冷浇注树脂复合物和热缩电缆接头.第1部分:材料规范 | Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Specification for materials |
BS 6910-2-1989 | 电压范围为交流1000V和直流1500Vd.c.的低温浇注树脂复合物和热缩电缆接头.第2部分:现场安装实用规程 | Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation |
BS 6913-6-1991 | 运土机械的操作和维修.第6部分:电线和电缆的识别和标志规范 | Operation and maintenance of earth-moving machinery - Specification for identification and marking of electrical wires and cables |
BS 6946-1988 | 电气设备用金属管道电缆支撑系统规范 | Specification for metal channel cable support systems for electrical installations |
BS 7019-1989 | 电压可达或等于6.6KV的系统(主要用于矿山)采用全屏蔽400A栓接式防火电缆连接器和转接器规范 | Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines |
BS 7197-1990 | 电力电缆终端连接和电压达36KV系统连接性能规范 | Specification for performance of bonds for electric power cable terminations and joints for system voltages up to 36 kV |
BS 7211-1998 | 受火情影响时排放少量烟雾和腐蚀性气体的电力和照明设备用热固绝缘(非铠装)电缆规范 | Electric cables - Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire |
BS 7215-1990 | 电压大于1KV和达36KV的分离式绝缘电缆连接器系统规范 | Specification for separable insulated cable connector systems above 1 kV and up to 36 kV |
BS 7346-6-2005 | 烟和热控制系统部件.电缆系统规范 | Components for smoke and heat control systems - Specifications for cable systems |
BS 7383-1990 | 煤矿用电压不超过11KV的作为外壳内连接电缆填充剂的冷浇树脂基化合物规范 | Specification for cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines |
BS 7450-1991 | 动力电缆尺寸最经济值测定方法 | Method for determination of economic optimization of power cable size |
BS 7540-2-2005 | 电缆.额定电压不超过450/750V的电缆使用指南.HD 21和HD 22的协调电缆类型 | Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V. Harmonized cable types from HD 21 and HD 22 |
BS 7540-3-2005 | 电缆.额定电压不超过450/750V的电缆使用指南.不包括在HD 21和HD 22中的国家标准电缆 | Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V. National standard cables not included in HD 21 and HD 22 |
BS 7609-1992 | 铜或铝导线动力电缆用非绝缘压缩和机械联接器的安装和检验实用规程 | Code of practice for installation and inspection of uninsulated compression and mechanical connectors for power cables with copper or aluminium conductors |
BS 7629-1-1997 | 具有低排放烟雾和腐蚀性气体的300/500 V电缆受火情影响时的耐火规范.第1部分:多心电缆 | Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire - Multicore cables |
BS 7629-2-1997 | 具有低排放烟雾和腐蚀性气体的300/500 V电缆受火情影响时的耐火规范.第2部分:多双股电缆 | Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire - Multipair cables |
BS 7655-1.2-1997 | 电缆用绝缘和铠装材料规范.弹性绝缘化合物.90℃时通用 | Specification for insulating and sheathing materials for cables - Part 1. Cross-linked elastomeric insulating compounds - Section 1.2 General 90 °C application |
BS 7655-1.3-2000 | 电缆用绝缘和铠装材料规范.弹性绝缘化合物.XLPE | Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - XLPE - Sec1.3 XLPE |
BS 7655-1.4-2000 | 电缆用绝缘和铠装材料规范.弹性绝缘化合物.耐油型 | Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - Oil resisting types - Oil resisting types |
BS 7655-1.5-2000 | 电缆用绝缘和铠装材料规范.弹性绝缘化合物.耐火复合物 | Specification for insulating and sheathing materials for cables - Part 1: Cross-linked elastomeric insulating compounds - Section 1.5: Flame retardant composites |
BS 7655-10.1-2000 | 电缆用绝缘和铠装材料规范.聚乙烯铠装化合物.热塑中等密度聚乙烯(MDPE)铠装化合物 | Specification for insulating and sheathing materials for cables - Part 10: Polyethylene sheathing compounds - Section 10.1: Thermoplastic medium density polyethylene (MDPE) sheathing compound |
BS 7655-2.3-2000 | 电缆用绝缘和铠装材料规范.弹性铠装化合物.一般用途 | Specification for insulating and sheathing materials for cables - Elastomeric sheathing compounds - General application - General application |
BS 7655-2.4-2000 | 电缆用绝缘和铠装材料规范.弹性铠装化合物.焊接电缆包敷物 | Specification for insulating and sheathing materials for cables - Part 2: Cross-linked elastomeric sheathing compounds - Section 2.4: Welding cable covering |
BS 7655-2.6-2000 | 电缆用绝缘和铠装材料规范.弹性铠装化合物.船只布线和近海设备用铠装化合物 | Specification for insulating and sheathing materials for cables - Part 2: Cross-linked elastomeric sheathing compounds - Section 2.6: Sheathing compounds for ships' wiring and offshore applications |
BS 7655-3.2-2000 | 电缆用绝缘和铠装材料规范.PVC绝缘化合物.硬等级型 | Specification for insulating and sheathing materials for cables - PVC insulating compounds - Hard grade types - Hard grade types |
BS 7655-4.2-2000 | 电缆用绝缘和铠装材料规范.PVC铠装化合物.一般用途 | Specification for insulating and sheathing materials for cables - PVC sheathing compounds - General application - General application |
BS 7727-1994 | 铜导体面积达6平方毫米(10AWG)电缆的预绝缘压力终端和连接器的安装和检测实用规程 | Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm2 |
BS 7769-1.1-1997 | 电缆.电流额定值的计算.电流额定值方程式(100%载荷系数)和损失率的计算.总则 | Electric cables - Calculation of the current rating - Current rating equations (100% load factor) and calculation of losses - General |
BS 7769-1.2-1994 | 电缆.额定电流的计算.额定电流方程式(负荷率100%)和损失率的计算.平面结构双电路铅包涡流损失率的计算 | Electric cables - Calculation of the current rating - Current rating equations (100% load factor) and calculation of losses - Sheath eddy current loss factors for two circuits in flat formation |
BS 7769-2-2.1-1997 | 电缆.额定电流的计算.热阻.热阻的计算 | Electric cables - Calculation of the current rating - Thermal resistance - Calculation of thermal resistance - Section 2.1: Calculation of thermal resistance |
BS 7769-2.1-1997 | 电缆.电流额定值的计算.热电阻.热电阻的计算 | Electric cables - Calculation of the current rating - Thermal resistance - Calculation of thermal resistance |
BS 7769-2.2-1997 | 电缆. 额定电流的计算.热变电阻.室外避免太阳辐射的电缆组减缩系数的计算方法 | Electric cables - Calculation of the current rating - Thermal resistance - A method for calculating reduction factors for groups of cables in free air, protected from solar radiation |
BS 7769-3.1-1997 | 电缆.电流额定值的计算.操作条件部分.基准操作条件和电缆型号的选择 | Electric cables - Calculation of the current rating - Sections on operating conditions - Reference operating conditions and selection of cable type |
BS 7816-3-1998 | 聚合物长期辐射老化的测定.低压电缆材料使用的监控程序 | Determination of long-term radiation ageing in polymers - Procedures for in-service monitoring of low-voltage cable materials |
BS 7821-2.1-1995 | 最高电压不超过36KV的设备用的50Hz、50-2500KVA三相油浸式配电变压器.带有高压和/或低压端电缆接线盒的配电 | Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - General requirements |
BS 7821-2.2-1998 | 50HZ,最高电压不超过36KW的由50-2500KVA的三相油浸配电变压器.带高压和/或低压单侧电缆盒的配电变压器.与BS | Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - Cable boxes of type 1 for use on distribution transformers meeting the requirements of BS 7821-2.1 |
BS 7821-2.3-1998 | 小于36KV设备的最高电压值为50Hz、50-2500KVA三相油浸式配电变压器.位于高压线和/或低压线边的电缆盒配电变 | Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - Cable boxes type 2 for use on distribution transformers meeting the requirements of BS 7821-2.1 |
BS 7835-2000 | 受火情影响时有少量排放烟和腐蚀气体的额定电压从3800/6600V至19000/33000V以下的交联聚乙烯或乙丙橡胶挤制 | Specification for armoured cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV having low emission of smoke and corrosive gases when affected by fire |
BS 7846-2000 | 电缆.受火影响时排放少量烟和腐蚀气体的600/1000 V 热固绝缘铠装耐火电缆 | Electric cables - 600/1000 V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire |
BS 7861-2-1997 | 煤矿用地层支撑系统部件.鸟笼式电缆螺栓连接规范 | Strata reinforcement support system components used in coal mines - Specification for birdcaged cablebolting |
BS 787-1-1969 | 矿用式防爆电缆终端箱规范.第1部分:(650V以下三相交流电路用)电动机 直接起动用电缆终端箱 | Specification for mining type flameproof gate-end boxes - Gate-end boxes for direct-on-line motor starting (for use on 3-phase a.c. circuits up to 650 V) |
BS 787-2-1968 | 矿用式防爆电缆终端箱规范.第2部分:(650V以下三相交流电路用)带空气断路器的电缆终端箱 | Specification for mining type flameproof gate-end boxes - Gate-end boxes with air-break circuit-breakers (for use on 3-phase a.c. circuits up to 650 volts) |
BS 787-3-1971 | 矿用式防爆电缆终端箱规范.第3部分:带照明变压器的电缆终端箱 | Specification for mining type flameproof gate-end boxes - Gate-end boxes with lighting transformers |
BS 787-4-1972 | 矿用式防爆电缆终端箱规范.第4部分:(650V以下三相交流电路用)钻机用电缆终端箱 | Specification for mining type flameproof gate-end boxes - Gate-end boxes for drilling machines (for use on 3-phase a.c. circuits up to 650 V) |
BS 7870-1-1996 | 供电与发电装置用低电压和常电压聚合绝缘电缆.综述 | LV and MV polymeric insulated cables for use by distribution and generation utilities - General |
BS 7870-2-1999 | 配电和发电设施用低压和中等电压聚合物绝缘电缆.试验方法 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Methods of test |
BS 7870-3.10-2001 | 供电与动力装置用低电压和常电压聚合绝缘电缆.额定电压为0.6/1KV的配电电缆规范.有铜线或铝导体的PVC隔绝的 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors |
BS 7870-3.11-2001 | 供电与动力装置用低电压和常电压聚合绝缘电缆.额定电压为0.6/1KV的配电电缆规范.有铜线或铝导体的XLPE隔绝 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors |
BS 7870-3.12-2001 | 供电与动力装置用低电压和常电压聚合绝缘电缆.额定电压为0.6/1KV的配电电缆规范.当有火焰影响时烟和腐蚀性 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors, having low emission of smoke and corrosive gases when affected by fire |
BS 7870-3.20-2001 | 供电与动力装置用低电压和常电压聚合绝缘电缆.额定电压为0.6/1KV的配电电缆规范.有铜或铝导体的PVC隔绝的分 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated split concentric cables with copper or aluminium conductors |
BS 7870-3.21-2001 | 供电与动力装置用低电压和常电压聚合绝缘电缆.额定电压为0.6/1KV的配电电缆规范.有铜或铝导体的XLPE隔绝的 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated split concentric cables with copper or aluminium conductors |
BS 7870-3.40-2001 | 供电与动力装置用低电压和常电压聚合绝缘电缆.额定电压为0.6/1KV的配电电缆规范.有固态铝导体的铜线波型同 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated, copper wire waveform concentric cables with solid aluminium conductors |
BS 7870-3.50-2005 | 配电和发电装置用低压和常压聚合绝缘电缆.额定电压为0.6/1KV的配电电缆规范.着火时轻微散发烟气和腐蚀性气 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Part 3: Specification for distribution cables of rated voltage 0.6/1 kV - Section 3050: XLPE insulated, copper wire waveform or helical concentric cables with solid aluminium conductors, having low emission of smoke and corrosive gases when affected by fire (Implementation of HD 603) |
BS 7870-4.10-1999 | 配电和发电设施用低压(LV)和中等电压(MV)聚合物绝缘电缆.额定电压为11kV和33kV的挤制绝缘配电电缆的规范.单 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single-core 11 kV and 33 kV cables - Single core 11 kV and 33 kV cables |
BS 7870-4.11-1999 | 配电和发电设施用低压(LV)和中等电压(MV)聚合物绝缘电缆.额定电压为11kV和33kV的挤制绝缘配电电缆的规范.单 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single-core 33 kV lead sheathed cables - Single core 33 kV lead sheathed cables |
BS 7870-4.20-1999 | 配电和发电设施用低压(LV)和中等电压(MV)聚合绝缘电缆.额定电压为11kV和33kV的挤制绝缘配电电缆的规范.三芯 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Three-core 11 kV cables - Three core 11 kV cables |
BS 7870-5-1999 | 用于配电和发电设备的低压和中压高聚合物绝缘电缆.架空配电用额定电压0.6/1KV的聚合物绝缘束导体(ABC) | LV and MV polymeric insulated cables for use by distribution and generation utilities - Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for overhead distribution |
BS 7870-6.1-1999 | 配电和发电设施用低电压和中等电压聚合物绝缘电缆.电站用具有特殊防火性能的0.6/1kV和1.9/3.3kV电力电缆的 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - PVC insulated and PVC sheathed cables |
BS 7870-6.2-1999 | 配电和发电设施用低压和中等电压聚合物绝缘电缆.电站用具有特别防火性能的0.6/1KV和1.9/3.3KV电力电缆规范. | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - XLPE or HEPR insulated and PVC sheathed cables |
BS 7870-6.3-1999 | 配电和发电设施用低压和中等电压聚合物绝缘电缆.电站用具有特别防火性能的0.6/1KV和1.9/3.3KV电力电缆规范. | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - Cables with thermosetting insulation and non-halogenated sheath |
BS 7870-7.1-2003 | 配电和发电设施用LV和MV聚合物绝缘电缆.电站用有防火性能的额定电压为3.8/6.6KV和6.35/11KV电力电缆规范.卤 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations - Single core and 3-core cables with halogenated materials and with aluminium or steel wire armouring |
BS 7870-7.2-2003 | 配电和发电设施用LV和MV聚合绝缘电缆.电站用具有特殊防火性能的额定电压为3.8/6.6KV和6.35/11KV电力电缆规 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations - Single-core and 3-core cables with halogen-free materials and with aluminium or steel wire armouring |
BS 7870-8.1-2003 | 配电和发电设施用低压(LV)和中等电压(MV)聚合绝缘电缆.地上或地下安装用多芯和多对电缆规范.单丝铠装和PVC | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multicore cable with copper conductors - Section 8.1 Single wire armoured and PVC sheathed multicore cable with copper conductors |
BS 7870-8.2-2003 | 配电和发电设施用低压(LV)和中等电压(MV)聚合绝缘电缆.地上和地下安装用多芯和多对电缆规范.单丝铠装和PVC | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multipair cable with copper conductors - Section 8.2 Single wire armoured and PVC sheathed multipair cable with copper conductors |
BS 7870-8.3-2003 | 配电和发电设施用低压(LV)和中等电压(MV)聚合绝缘电缆.地上和地下安装用多芯和多对电缆规范.具有降低火焰传 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance - Section 8.3 Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance |
BS 7870-8.4-2003 | 配电和发电设施用低压(LV)和中等电压(MV)聚合绝缘电缆.地上和地下安装用多芯和多对电缆规范.具有降低火焰传 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance - Section 8.4 Single wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance |
BS 7870-8.5-2003 | 配电和发电设施用低压(LV)和中等电压(MV)聚合绝缘电缆.地上和地下安装用多芯和多对电缆规范.单丝铠装和非铠 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath - Section 8.5 Single wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath |
BS 7870-8.6-2003 | 配电和发电设施用低压(LV)和中等电压(MV)聚合绝缘电缆.地上和地下安装用多芯和多对电缆规范.单丝或双钢带铠 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors - Section 8.6 Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors |
BS 7888-4.1-2006 | 用于额定电压从3,6/6(7,2)kV到20,8/36(42)kV的电力电缆的附件的试验要求.带挤压绝缘层电缆 | Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2)kV up to 20,8/36(42)kV - Part 1: Cables with extruded insulation |
BS 7888-4.2-2006 | 用于额定电压从3,6/6(7,2) kV到20,8/36(42)kV的电力电缆的附件的试验要求.带浸渍纸绝缘层电缆 | Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42)kV - Part 2: Cables with impregnated paper insulation |
BS 7889-1997 | 600/1000V单芯非铠装热固性绝缘电缆规范 | Electric cables - Thermosetting insulated, unarmoured cables for a voltage of 600/1000 V |
BS 7894-2003 | 额定电压3.8/6.6 kV至19/33 kV的MV浸渍纸绝缘的配线电缆 | MV impregnated paper insulated distribution cables of rated voltages of 3.8/6.6 kV to 19/33 kV |
BS 7912-2001 | 额定电压66KV66 kV (UDOWNm=72.5 kV)至132KV(UDOWNm=145kV)带XLPE绝缘和金属护套的电力电缆及其配件.要求和 | Power cables with XLPE insulation and metallic sheath, and their accessories, for rated voltages from 66 kV (Um=72.5 kV) to 132kV (Um=145kV) - Requirements and test methods |
BS 7917-1999 | 船上和移动式或固定式近海设备上的固定布线用的弹性绝缘耐火电缆(固定线路集成度).要求和试验方法 | Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units - Requirements and test methods |
BS 7919-2001 | 电缆.工业和类似环境用的设备和装置用的额定电压不超过450/750V的柔性电缆 | Electric cables - Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments |
BS 7922-2004 | 电缆.交流电压为400 kV及以下(Um=420kV)的充液的纸和PPL绝缘的金属护套电缆和配件.要求和试验方法 | Electric cables - Fluid-filled, paper- and PPL-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV (Um = 420 kV) - Requirements and test methods |
BS 7923-2004 | 电缆.交流电压为275 kV及以下(Um=300kV)的内气压电缆和附件.要求和试验方法 | Electric cables - Internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV (Um = 300 kV) - Requirements and test methods |
BS 7933-1-1998 | 电缆.附件.材料特性.在加工处理状态和处理前的树脂化合物 | Electric cables - Accessories - Material characterization - Resinous compounds before cure and in the cured state |
BS 7970-2005 | 电缆.额定电压66kV(Um=72.5kV)至132kV(Um=145kV)带XLPE绝缘的电力电缆用金属线和箔护套 | Electric cables - Metallic wire and foil sheath constructions of power cables having XLPE insulation for rated voltages from 66kV (Um = 72.5 kV) to 132kV (Um = 145 kV) |
BS 8434-2-2003 | 电缆着火完整性评定的试验方法.应急电路中使用的无防护型小型电缆的试验.BS EN 50200外加930鳦火焰和喷水器 | Methods of test for assessment of the fire integrity of electric cables - Test for unprotected small cables for use in emergency circuits - BS EN 50200 with 930 deg flame and with water spray |
BS 8436-2004 | 电缆.墙、隔墙和建筑物空间中使用的着火时有低排烟量和腐蚀气体释放的300/500V屏蔽电缆.多芯电缆 | Electric cables - 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids - Multicore cables |
BS 91-1998 | 电缆焊接插座.规范 | Electric cable soldering sockets - Specification |
BS AU 16a-1989 | 电缆连接器(最大连续额定电流17.5A)规范 | Specification for electrical cable connectors (17.5 A maximum continuous rating) |
BS AU 255-1-1994 | 道路车辆非屏蔽低压电缆.厚壁绝缘电缆的导线大小和尺寸规范 | Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thick walled insulated cables |
BS AU 255-2-1994 | 道路车辆非屏蔽低压电缆.薄壁绝缘电榄的导线大小及尺寸规范 | Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thin walled insulated cables |
BS AU 267-1998 | 断开式电缆和二次耦合的实用规程 | Code of practice for breakaway cables and secondary couplings |
BS AU 7a-1983 | 道路车辆电缆的颜色标志规范 | Specification for colour code for road vehicle electrical cables |
BS AU 88a-1985 | 汽车用轻型电缆额定容量推荐标准 | Recommendations for ratings for light duty cables for automobile use |
BS AU 91-1965 | 起动蓄电池圆锥形接线端子的电缆接头尺寸(用正极接地部件的汽车和轻便商用汽车)规范 | Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (cars and light commercial vehicles using positive earth system) |
BS DD CLC/TS 50429-2005 | 光缆.地下电缆.安装在雨水道和卫生间下水道的光缆的系列规范 | Optical fibre cables - Sewer cables - Family specification for cables to be installed in storm and sanitary sewers |
BS DD CLC/TS 50430-2005 | 光缆.燃气管道电缆.高压燃气管道电缆的系列规范 | Optical fibre cables - Gas pipe cables - Family specifications for cables to be installed in high pressure gas pipes |
BS DD CLC/TS 50431-2005 | 光缆.饮用水管道电缆.饮用水管道电缆的系列规范 | Optical fibre cables - Drinking water pipe cables - Family specification for cables to be installed in drinking water pipes |
BS DD ENV 13149-2-2000 | 公共运输.道路车辆调度表和控制系统.WORLDFIP电缆线路规范 | Public transport - Road vehicle scheduling and control systems - WORLDFIP cabling specifications |
BS DD IEC/PAS 62338-2003 | 屏蔽对称电缆.用三维法测量连接衰减 | Screened balanced cables - Coupling attenuation measurement, triaxial method |
BS DD ISO/TS 16553-2006 | 道路车辆.数据电缆.试验方法和要求 | Road vehicles - Data cables - Test methods and requirements |
BS EN 10257-1-1998 | 电力电缆或通信电缆铠装用镀锌或锌合金非合金钢丝.地面电缆 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Land cables |
BS EN 10257-2-1998 | 电力电缆或通信电缆铠装用锌或锌合金涂覆非合金钢丝.海底电缆 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Submarine cables |
BS EN 12548-1999 | 铅和合金.电缆铠和护套用铅合金铸锭 | Lead and alloys - Lead alloy ingots for electric cable sheathing and for sleeves |
BS EN 12613-2001 | 具有视觉特征的地下电缆和管道用塑料警告装置 | Plastic warning devices for underground cables and pipelines with visual characteristics |
BS EN 13149-5-2004 | 公共运输.道路车辆调度和控制系统.CANopen电缆敷设规范 | Public transport - Road vehicle scheduling and control systems - CANopen cabling specifications |
BS EN 13920-3-2003 | 铝和铝合金.废料.废金属丝和电缆 | Aluminium and aluminium alloys - Scrap - Wire and cable scrap |
BS EN 175500-1997 | 电子元器件质量评定协调体系.分规范:包括合格鉴定和能力批准的连接器用辅助输出电缆 | Harmonized system of quality assessment for electronic components - Sectional specification:cable outlet accessories for connectors, including qualification approval and capability approval |
BS EN 186150-1997 | OCCA-BU型光纤织物和电缆用连接器组件 | Connector sets for optical fibres and cables - Type OCCA-BU |
BS EN 186160-1997 | OCCA-PC型光纤织物和电缆用连接器组件 | Connector sets for optical fibres and cables - Type OCCA-PC |
BS EN 186170-1998 | 电子元器件质量评定协调体系.分规范.光纤和电缆连接装置.RCC型 | Harmonized system of quality assessment for electronic components - Sectional specification:connector sets for optical fibres and cables - Type RCC |
BS EN 186260-1998 | 电子元器件质量评定协调体系.分规范:光纤和电缆连接器组件.SC型 | Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type SC |
BS EN 186270-1998 | 电子元器件质量评定协调体系.分规范:光纤和电缆连接件.LSH型 | Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type LSH |
BS EN 186290-1998 | 电子元器件质量评定协调体系.光纤和电缆连接件.MPO型 | Harmonized system of quality assessment for electronic components - Connector sets for optical fibres and cables - Type MPO |
BS EN 186300-1999 | 电子器元件质量评定协调体系.分规范:MSC型光纤和电缆连接装置 | Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables type MSC |
BS EN 186310-1999 | 电子元器件质量评定协调体系.分规范:光纤和电缆连接装置.MF型 | Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type MF |
BS EN 187105-2002 | 单膜光纤电缆(管道/直接掩埋设备) | Single mode optical cable (duct/direct buried installation) |
BS EN 2083-2001 | 航空航天系列.电缆用铜及铜合金导体.产品标准 | Aerospace series - Copper and copper alloy conductors for electrical cables - Product standard |
BS EN 2084-2005 | 航空航天系列.单芯、通用、带铜或铜合金导体的电缆.技术规范 | Cables, electric, single-core, general purpose, with conductors in copper or copper alloy — Technical specification |
BS EN 2266-003-2005 | 航空航天系列.通用电缆.操作温度为-55 °C 到 200 °C.喷墨可印刷.产品标准 | Cables, electrical, for general purpose — Operating temperatures between -55 °C and 200 °C — Part 003: Ink jet printable — Product standard |
BS EN 2266-005-2005 | 航空航天系列.通用电缆.操作温度为-55 °C 到 200 °C .紫外激光可印刷.产品标准 | Cables, electrical, for general purpose — Operating temperatures between??-55 ℃ and 200 ℃ — Part 005: UV laser printable — Product standard |
BS EN 2266-007-2005 | 航空航天系列.通用电缆.操作温度为-55 °C 到 200 °C .紫外激光可印刷多芯装套电缆.产品标准 | Cables, electrical, for general purpose — Operating temperatures between –55 ℃ and 200 ℃ — Part 007: UV laser printable multicore jacketed cable — Product standard |
BS EN 2267-002-2005 | 航空系列.一般用途的电缆,电器.-55 °C和260 °C之间的操作温度.总则 | Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 002: General |
BS EN 2267-003-2005 | 航空系列.一般用途的电缆,电器.-55 °C和260 °C之间的操作温度.喷墨可打印.产品标准 | Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C— Part 003: Inkjet printable — Product standard |
BS EN 2267-007-2005 | 航空系列.一般用途的电缆,电器.-55°C和260°C之间的操作温度.DMA族、单个可打印紫外激光和多芯附件.产品标 | Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 007: DMA family, single ink-jet printable and multicore assembly — Product standard |
BS EN 2267-008-2005 | 航空系列.一般用途的电缆,电器.-55°C和260°C之间的操作温度.DM族、单个可打印紫外激光和多芯附件.产品标 | Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 008: DM family, single UV laser printable and multicore assembly — Product standard |
BS EN 2267-009-2005 | 航空系列.一般用途的电缆,电器.-55℃和260℃之间的操作温度.DRA族、单个可打印UV激光和多芯附件.产品标准 | Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 009: DRA family, single and multicore assembly — Product standard |
BS EN 2267-010-2005 | 航空系列.一般用途的电缆,电器.-55℃和260℃之间的操作温度.DM族、单个可打印UV激光.产品标准 | Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 010: DR family, single UV laser printable — Product standard |
BS EN 2591-609-2005 | 航空航天系列.电和光学连接元件.试验方法.光学元件.电缆附件有效性.电缆循环可挠性 | Elements of electrical and optical connection — Test methods — Part 609: Optical elements — Effectiveness of cable attachment — Cable cyclic flexing |
BS EN 2591-610-2001 | 电气和光学连接元件.试验方法.光学元件.电缆连接的效果.电缆拉拔试验 | Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable pulling |
BS EN 2591-611-2001 | 电气和光学连接元件.试验方法.光学元件.电缆连接的效果.电缆扭力 | Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable torsion |
BS EN 2591-612-2001 | 电气和光学连接元件.试验方法.光学元件.电缆附着的效果.电缆轴向压缩 | Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable axial compression |
BS EN 2713-003-2005 | 航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和200 °C之间.屏蔽式(螺旋式)和有护套的可印 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, ink jet printable - Product standard |
BS EN 2713-007-2005 | 航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和200 °C之间.屏蔽式(螺旋式)和有护套的可印 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, UV laser printable - Product standard |
BS EN 2714-002-2005 | 航空航天系列.通用单芯和多芯电缆.-55度和260度之间操作.屏蔽和护套电缆.总则 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 002: Screened and jacketed — General |
BS EN 2714-003-2005 | 航空航天系列.通用单芯和多芯电缆.-55度and 260度之间操作.屏蔽(螺旋)和橡套电缆.产品标准 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 003: Screened (spiral) and jacketed, ink jet printable — Product standard |
BS EN 2714-007-2005 | 航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和260 °C之间.屏蔽式(螺旋式)和有护套的可印 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 007: Screened (spiral) and jacketed, UV laser printable — Product standard |
BS EN 2714-011-2005 | 航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和260 °C之间.DM族、屏蔽式(螺旋式)和有护套 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 011: DM family, screened (spiral) and jacketed, UV laser printable — Product standard |
BS EN 2714-012-2005 | 航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和260 °C之间.DM族、屏蔽式(麻花型)和有护套 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 012: DM family, screened (braided) and jacketed, UV laser printable — Product standard |
BS EN 2714-013-2005 | 航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和260 °C之间.DM族、屏蔽式(螺旋式)和有护套 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 013: DR family, screened (spiral) and jacketed, UV laser printable — Product standard |
BS EN 2853-2005 | 导体EN 2083的电缆的额定电流 | Current ratings for electrical cables with conductor EN 2083 |
BS EN 3475-100-2002 | 航空航天系列.飞行器用电缆.试验方法.总则 | Aerospace series - Cables, electrical, aircraft use - Test methods - General |
BS EN 3475-201-2002 | 航空航天系列.飞行器用电缆.试验方法.目视检查 | Aerospace series - Cables, electrical, aircraft use - Test methods - Visual examination |
BS EN 3475-202-2002 | 航空航天系列.飞行器用电缆.试验方法.质量 | Aerospace series - Cables, electrical, aircraft use - Test methods - Mass |
BS EN 3475-301-2002 | 航空航天系列.飞行器用电缆.试验方法.单位长度的欧姆电阻 | Aerospace series - Cables, electrical, aircraft use - Test methods - Ohmic resistance per unit length |
BS EN 3475-303-2002 | 航空航天系列.飞行器用电缆.试验方法.绝缘电阻 | Aerospace series - Cables, electrical, aircraft use - Test methods - Insulation resistance |
BS EN 3475-304-2002 | 航空航天系列.飞行器用电缆.试验方法.表面电阻 | Aerospace series - Cables, electrical, aircraft use - Test methods - Surface resistance |
BS EN 3475-305-2002 | 航空航天系列.飞行器用电缆.试验方法.过载电阻 | Aerospace series - Cables, electrical, aircraft use - Test methods - Overload resistance |
BS EN 3475-306-2005 | 航空航天系列.飞行器用电缆.试验方法.导线连贯性 | Cables, electrical, aircraft use — Test methods — Part 306: Continuity of conductors |
BS EN 3475-307-2005 | 航空航天系列.飞行器用电缆.试验方法.电晕熄灭电压 | Cables, electrical, aircraft use — Test methods — Part 307: Corona extinction voltage |
BS EN 3475-401-2002 | 航空航天系列.飞行器用电缆.试验方法.加速老化试验 | Aerospace series - Cables, electrical, aircraft use - Test methods - Accelerated ageing |
BS EN 3475-402-2002 | 航空航天系列.飞行器用电缆.试验方法.收缩性和脱层 | Aerospace series - Cables, electrical, aircraft use - Test methods - Shrinkage and delamination |
BS EN 3475-403-2002 | 航空航天系列.飞行器用电缆.试验方法.脱层和阻塞 | Aerospace series - Cables, electrical, aircraft use - Test methods - Delamination and blocking |
BS EN 3475-404-2002 | 航空航天系列.飞行器用电缆.试验方法.热冲击 | Aerospace series - Cables, electrical, aircraft use - Test methods - Thermal shock |
BS EN 3475-405-2002 | 航空航天系列.飞行器用电缆.试验方法.环境温度下的弯曲 | Aerospace series - Cables, electrical, aircraft use - Test methods - Bending at ambient temperature |
BS EN 3475-406-2002 | 航空航天系列.飞行器用电缆.试验方法.冷弯曲试验 | Aerospace series - Cables, electrical, aircraft use - Test methods - Cold bend test |
BS EN 3475-407-2005 | 航空航天系列.飞机用电缆.试验方法.可燃性 | Cables, electrical, aircraft use — Test methods — Part 407: Flammability |
BS EN 3475-408-2005 | 航空航天系列.飞机用电缆.试验方法.耐燃性 | Cables, electrical, aircraft use — Test methods — Part 408: Fire resistance |
BS EN 3475-409-2002 | 航空航天系列.飞行器用电缆.试验方法.真空老化试验 | Aerospace series - Cables, electrical, aircraft use - Test methods - Air-excluded ageing |
BS EN 3475-410-2002 | 航空航天系列.飞行器用电缆.试验方法.耐热性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Thermal endurance |
BS EN 3475-411-2005 | 航空航天系列.飞行器用电缆.试验方法.耐液体 | Cables, electrical, aircraft use — Test methods — Part 411: Resistance to fluids |
BS EN 3475-412-2002 | 航空航天系列.飞行器用电缆.试验方法.耐湿度 | Aerospace series - Cables, electrical, aircraft use - Test methods - Humidity resistance |
BS EN 3475-413-2002 | 航空航天系列.飞行器用电缆.试验方法.反复缠绕试验 | Aerospace series - Cables, electrical, aircraft use - Test methods - Wrap back test |
BS EN 3475-414-2005 | 航空航天系列.飞行器用电缆.试验方法.差示扫描量热仪(DSC 试验) | Cables, electrical, aircraft use — Test methods — Part 414: Differential scanning calorimeter (DSC test) |
BS EN 3475-415-2005 | 航空航天系列.飞行器用电缆.试验方法.温度快速改变 | Cables, electrical, aircraft use — Test methods — Part 415: Rapid change of temperature |
BS EN 3475-416-2005 | 航空航天系列.飞行器用电缆.试验方法.热稳定性 | Cables, electrical, aircraft use — Test methods — Part 416: Thermal stability |
BS EN 3475-501-2002 | 航空航天系列.飞行器用电缆.试验方法.动态切口 | Aerospace series - Cables, electrical, aircraft use - Test methods - Dynamic cut-through |
BS EN 3475-502-2002 | 航空航天系列.飞行器用电缆.试验方法.切口延伸 | Aerospace series - Cables, electrical, aircraft use - Test methods - Notch propagation |
BS EN 3475-503-2002 | 航空航天系列.飞行器用电缆.试验方法.擦伤腐蚀 | Aerospace series - Cables, electrical, aircraft use - Test methods - Scrape abrasion |
BS EN 3475-504-2002 | 航空航天系列.飞行器用电缆.试验方法.扭力 | Aerospace series - Cables, electrical, aircraft use - Test methods - Torsion |
BS EN 3475-505-2002 | 航空航天系列.飞行器用电缆.试验方法.导线和绞线的抗拉试验 | Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile tests on conductors and strands |
BS EN 3475-506-2002 | 航空航天系列.飞行器用电缆.试验方法.电镀连续性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Plating continuity |
BS EN 3475-507-2002 | 航空航天系列.飞行器用电缆.试验方法.电镀的附着力 | Aerospace series - Cables, electrical, aircraft use - Test methods - Adherence of plating |
BS EN 3475-508-2002 | 航空航天系列.飞行器用电缆.试验方法.镀层厚度 | Aerospace series - Cables, electrical, aircraft use - Test methods - Plating thickness |
BS EN 3475-509-2002 | 航空航天系列.飞行器用电缆.试验方法.可焊接性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Solderability |
BS EN 3475-510-2002 | 航空航天系列.飞行器用电缆.试验方法.挤压绝缘护套和套管材料的抗拉强度和延伸率 | Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile strength and elongation of extruded insulation, sheath and jacket material |
BS EN 3475-511-2002 | 航空航天系列.飞行器用电缆.试验方法.电缆对电缆的磨耗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Cable-to-cable abrasion |
BS EN 3475-512-2002 | 航空航天系列.飞行器用电缆.试验方法.耐弯度 | Aerospace series - Cables, electrical, aircraft use - Test methods - Flexure endurance |
BS EN 3475-513-2005 | 航空航天系列.飞行器用电缆.试验方法.耐变形(用塑料电缆扎带安装) | Cables, electrical, aircraft use — Test methods — Part 513: Deformation resistance (Installation with plastic cable ties) |
BS EN 3475-603-2002 | 航空航天系列.飞行器用电缆.试验方法.耐湿弧光痕迹性能 | Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to wet arc tracking |
BS EN 3475-604-2002 | 航空航天系列.飞行器用电缆.试验方法.耐干弧光的传播性能 | Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to dry arc propagation |
BS EN 3475-605-2002 | 航空航天系列.飞行器用电缆.试验方法.湿气短路试验 | Aerospace series - Cables, electrical, aircraft use - Test methods - Wet short circuit test |
BS EN 3475-701-2002 | 航空航天系列.飞行器用电缆.试验方法.绝缘材料与导体的脱层和附着力 | Aerospace series - Cables, electrical, aircraft use - Test methods - Strippability and adherence of insulation to the conductor |
BS EN 3475-702-2002 | 航空航天系列.飞行器用电缆.试验方法.屏蔽后推移能力 | Aerospace series - Cables, electrical, aircraft use - Test methods - Screen pushback capability |
BS EN 3475-703-2002 | 航空航天系列.飞行器用电缆.试验方法.制造商标记的耐久性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Permanence of manufacturer's marking |
BS EN 3475-704-2002 | 航空航天系列.飞行器用电缆.试验方法.挠性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Flexibility |
BS EN 3475-705-2005 | 航空系航天列.飞机用电缆.试验方法.对比度测量 | Cables, electrical, aircraft use — Test methods — Part 705: Contrast measurement |
BS EN 3475-706-2005 | 航空航天系列.飞行器用电缆.试验方法.激光可标记性 | Cables, electrical, aircraft use — Test methods — Part 706: Laser markability |
BS EN 3475-801-2002 | 航空航天系列.飞行器用电缆.试验方法.单位长度导体的电容量 | Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance per unit length |
BS EN 3475-802-2002 | 航空航天系列.飞行器用电缆.试验方法.不平衡导体的电容量 | Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance unbalance |
BS EN 3475-803-2002 | 航空航天系列.飞行器用电缆.试验方法.导体的电容量的变化 | Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance variation |
BS EN 3475-804-2002 | 航空航天系列.飞行器用电缆.试验方法.传播速度 | Aerospace series - Cables, electrical, aircraft use - Test methods - Velocity of propagation |
BS EN 3475-805-2002 | 航空航天系列.飞行器用电缆.试验方法.特性阻抗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Characteristic impedance |
BS EN 3475-806-2002 | 航空航天系列.飞行器用电缆.试验方法.衰减性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Attenuation |
BS EN 3475-807-2002 | 航空航天系列.飞行器用电缆.试验方法.转移阻抗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Transfer impedance |
BS EN 3475-808-2002 | 航空航天系列.飞行器用电缆.试验方法.交叉谈话 | Aerospace series - Cables, electrical, aircraft use - Test methods - Cross-talk |
BS EN 3719-2005 | 航空航天系列.电缆的铝或铝合金导体.产品标准 | Aluminium or aluminium alloy conductors for electrical cables — Product standard |
BS EN 3745-511-2002 | 航空航天系列.飞行器用光纤和光缆.试验方法.电缆间的磨蚀 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Cable to cable abrasion |
BS EN 4049-002-2005 | 航空航天系列.热电偶膨胀电缆.操作温度在-65 °C 和260 °C之间.总则 | Thermocouple extension cable — Operating temperatures between -65 °C and 260 °C — Part 002: General |
BS EN 4057-201-2005 | 航空航天系列.导线电缆扎匝.试验方法.外观检查 | Cable ties for harnesses — Test methods — Part 201: Visual examination |
BS EN 4057-202-2005 | 航空航天系列.导线电缆扎匝.试验方法.质量和尺寸的检查 | Cable ties for harnesses — Test methods — Part 202: Examination of mass and dimensions |
BS EN 4057-301-2005 | 航空航天系列.导线电缆扎匝.试验方法.盐雾试验 | Cable ties for harnesses — Test methods — Part 301: Salt mist test |
BS EN 4057-303-2005 | 航空航天系列.导线电缆扎匝.试验方法.防液 | Cable ties for harnesses — Test methods — Part 303: Resistance to fluids |
BS EN 4057-305-2005 | 航空航天系列.导线电缆扎匝.试验方法.染色牢度 | Cable ties for harnesses -- Test methods -- Part 305: Coulor fastness?? |
BS EN 4057-405-2005 | 航空航天系列.导线电缆扎匝.试验方法.罗盘安全距离 | Cable ties for harnesses — Test methods — Part 405: Compass safe distance |
BS EN 4057-407-2005 | 航空航天系列.导线电缆扎匝.试验方法.使用工具调整校验 | Cable ties for harnesses — Test methods — Part 407: Verification of application tool settings |
BS EN 4165-013-2005 | 航空航天系列.矩形模块电连接器.连续操作温度175 °C.系列2和系列3的连接器的模块2和4的电缆夹.产品标准 | Connectors, electrical, rectangular, modular — Operating temperature 175 ℃ continuous??— Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 — Product standard |
BS EN 4434-2005 | 航空航天系列.电缆的铜和铜合金轻型导体.产品质量(正常和紧公差) | Copper or copper alloy lightweight conductors for electrical cables — Product standard (Normal and tight tolerances) |
BS EN 45510-2-8-2004 | 发电站设备采购指南.电气设备.电力电缆 | Guide for procurement of power station equipment - Electrical equipment - Power cables |
BS EN 50083-10-2002 | 电视和声音信号的电缆分配系统.回程线路的系统性能 | Cabled distribution systems for television and sound signals - System performance for return paths |
BS EN 50083-3-2002 | 电视和声信号用电缆分布系统.有源同轴电缆网络的活动宽带设备 | Cabled distribution systems for television and sound signals - Active wideband equipment for coaxial cable networks |
BS EN 50083-4-1999 | 电视和伴音信号的电缆配电系统.同轴电缆网络无源宽带设备 | Cabled distribution systems for television and sound signals - Passive wideband equipment for coaxial cable networks |
BS EN 50083-5-2002 | 电视和声音信号电缆分配系统.输入设备 | Cabled distribution systems for television and sound signals - Headend equipment |
BS EN 50083-7-1997 | 电视和声信号用电缆分布系统.第7部分:系统性能 | Cabled distribution systems for television and sound signals - System performance |
BS EN 50083-8-2002 | 电视和音频信号的电缆分配系统.安全性要求.网络的电磁兼容性 | Cabled distribution systems for television and sound signals - Electromagnetic compatibility for networks |
BS EN 50083-9-2003 | 电视和声信号用电缆分布系统.第9部分:CATV/SMATV 输入端接口和DVB/MPEG-2输送流用类似专业设备 | Cabled distribution systems for television and sound signals - Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams |
BS EN 50085-2-3-2001 | 电气装置用电缆导管和电缆管道系统.配电箱内安装的线槽电缆主干系统专门要求.第3节:配电箱内开槽 | Cable trunking and cable ducting systems for electrical installations - Particular requirements for slotted cable trunking systems intended for installation in cabinets - Section 3: Slotted in cabinets |
BS EN 50090-9-1-2005 | 家用和建筑物用电子系统.安装要求.1类HBES双扭线用通用电缆 | Home and building electronic systems (HBES) - Installation requirements - Generic cabling for HBES class 1 twisted pair |
BS EN 50098-1-1999 | 信息技术用户室内电缆的敷设.ISDN基础访问 | Customer premises cabling for information technology - ISDN basic access |
BS EN 50098-2-1996 | 信息技术用用户房屋电缆线路.2048kbit/s ISDN基本存取和租用专用通信网接口 | Customer premises cabling for information technology - 2048 kbit/s ISDN primary access and leased line network interface |
BS EN 50109-1-1996 | 手工压接工具.低频和射频用电缆和电线终端压接工具.一般要求和试验 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - General requirements and tests |
BS EN 50109-2-1-1996 | 手工压接工具.低频和射频用电缆和电线终端压接工具.特殊要求.射频连接器和同轴接触点.有固定模开式工具,规 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Radio frequency connectors and concentric contacts - Open throat tools with fixed dies, sizes A to E, V and W |
BS EN 50109-2-2-1996 | 手工压接工具.低频和射频用电缆和电线终端压接工具.特殊要求.射频连接器和同轴接触点的手工压接工具.有可拆 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Radio frequency connectors and concentric contacts - Open throat tools with removable and interchangeable dies, sizes A to G, Q to T, V and W |
BS EN 50109-2-3-1996 | 手动压接工具.低频和高频电线和电缆压接连接工具.第2-3部分:电器插接件触点专门要求 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Contacts of electrical connectors |
BS EN 50109-2-4-1996 | 手动压接工具.低频和高频电线和电缆压接连接工具.专门要求.SMZ系列高频插接连接的中间接点专门要求 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Centre contacts of RF connectors, series SMZ |
BS EN 50109-2-5-1996 | 手动压接工具.低频和高频用电线和电缆压接连接用工具.专门要求.数据总线用带2个内芯的电缆连接专门要求 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Termination of twin-ax cable for databus applications |
BS EN 50117-1-2002 | 同轴电缆.总规范 | Coaxial cables - Part 1: Generic specification |
BS EN 50117-2-1-2005 | 同轴电缆.电缆配电网络用电缆分规范.在 5MHz - 1000 MHz 工作的系统用室内安装电缆 | Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 1000 MHz |
BS EN 50117-2-2-2004 | 同轴电缆.电缆配电网络用电缆的分规范.在5 MHz - 1000 MHz上运行的系统用室外引入电缆 | Coaxial cables - Part 2-2: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 1000 MHz |
BS EN 50117-2-3-2004 | 同轴电缆.电缆配电网络用电缆的分规范.在5 MHz - 1000 MHz上运行的系统用配电电缆和中继电缆 | Coaxial cables - Part 2-3: Sectional specification for cables used in cabled distribution networks - Distribution and trunk cables for systems operating at 5 MHz - 1000 MHz |
BS EN 50117-2-4-2004 | 同轴电缆.电缆配电网络用电缆的分规范.在5 MHz - 3000 MHz上运行的系统用室内引入电缆 | Coaxial cables - Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 3000 MHz |
BS EN 50117-2-5-2004 | 同轴电缆.电缆配电网络用电缆的分规范.在5 MHz - 3000 MHz上运行的系统用室外引入电缆 | Coaxial cables - Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 3000 MHz |
BS EN 50117-3-1-2002 | 同轴电缆.电信用电缆分规范.数字电信系统用微型化的电缆 | Coaxial cables - Sectional specifications for cables used in telecom applications - Miniaturized cables used in digital communication systems |
BS EN 50117-3-1996 | 电缆分布网络中用的同轴电缆.室外接地电缆的分规范 | Coaxial cables used in cabled distribution networks - Part 3: Sectional specification for outdoor drop cables |
BS EN 50117-4-1996 | 电缆配电设备用同轴电缆.第4部分:配电器和线路电缆用分规范 | Coaxial cables used in cabled distribution networks - Part 4: Sectional specification for distribution and trunk cables |
BS EN 50117-5-1997 | 电缆配电网络用同轴电缆.用在频率在5MHz-2150MHz之间电网操作室内分接电缆分规范 | Coaxial cables used in cabled distribution networks - Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz |
BS EN 50117-6-1997 | 电缆配电网络用同轴电缆.用于频率在5MHz-2150MHz之间电网操作室外分接电缆分规范 | Coaxial cables used in cabled distribution networks - Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz |
BS EN 50143-1999 | 空载运行电压1k以上但不超过10k的发光管装置和发光管设备用电缆 | Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV |
BS EN 50146-2000 | 电力设备用电缆连接线 | Cable ties for electrical installations |
BS EN 50173-1-2003 | 信息技术.通用的电缆敷设系统.一般要求和办公区 | Information technology - Generic cabling systems - General requirements and office areas |
BS EN 50174-1-2001 | 信息技术.电缆装配.规范和质量保证 | Information technology - Cabling installation - Specification and quality assurance |
BS EN 50174-2-2001 | 信息技术.电缆装配.建筑物内安装规划和惯例 | Information technology - Cabling installation - Installation planning and practices inside buildings |
BS EN 50174-3-2004 | 信息技术.电缆敷设装置.安装计划和和建筑物外部的实施 | Installation technology - Cabling installation - Installation planning and practices outside buildings |
BS EN 50200-2006 | 紧急线路用非保护型小电缆的耐火性试验方法 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
BS EN 50214-1998 | 升降机用挠性电缆 | Flexible cables for lifts |
BS EN 50249-2003 | 地下管道和电缆用电磁波监测器.性能和安全 | Electromagnetic locators for buried pipes and cables - Performance and safety |
BS EN 50262-1999 | 电气设备用米制电缆密封装置 | Cable glands for electrical installations |
BS EN 50264-1-2002 | 铁路设施.有特殊防火性能的铁路机车车辆电缆.标准壁厚.一般要求 | Railway applications - Railway rolling stock cables having special fire performance - Standard wall - General requirements |
BS EN 50264-2-2002 | 铁路设施.有特殊防火性能的铁路机车车辆电缆.标准壁厚.单芯电缆 | Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Single core cables |
BS EN 50264-3-2002 | 铁路设施.有特殊防火性能的铁路机车车辆电缆.标准壁厚.多芯电缆 | Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Multicore cables |
BS EN 50266-1-2001 | 着火条件下电缆通用试验方法.垂直固定的电线束或电缆的垂直火焰扩散试验.装置 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus |
BS EN 50266-2-1-2001 | 着火条件下电缆的通用试验方法.垂直固定的垂直束状电线和电缆的垂直火焰扩散的试验.试验程序.类别A,F/R | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category A F/R |
BS EN 50266-2-2-2001 | 着火条件下电缆通用试验方法.垂直固定的电线束和或电缆的垂直火焰扩散试验.过程.类别A | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category A |
BS EN 50266-2-3-2001 | 着火条件下电缆通用试验方法.垂直固定的电线束或电缆的垂直火焰扩散试验.过程.类别B | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category B |
BS EN 50266-2-4-2001 | 着火条件下电缆通用试验方法.垂直固定的电线束或电缆的垂直火焰扩散试验.过程.类别C | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category C |
BS EN 50266-2-5-2001 | 着火条件下电缆通用试验方法.垂直固定的电线束或电缆的垂直火焰扩散试验.过程.小电缆.类别D | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Small cables - Category D |
BS EN 50267-1-1999 | 失火情况下电缆的一般检验方法.电缆材料燃烧时产生的气体的检验.仪器 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Apparatus |
BS EN 50267-2-1-1999 | 燃烧情况下电缆的一般检验方法.电缆材料燃烧时产生的气体的试验.程序.卤氢酸气体含量的测定 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of the amount of halogen acid gas - Determination of the amount of halogen acid gas |
BS EN 50267-2-2-1999 | 燃烧情况下电缆的通用试验方法.电缆材料燃烧时产生的气体的试验.程序.通过测量Ph值和传导性测定材料燃烧产 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity - Determination of degree of acidity of gases for materials by measuring pH and conductivity |
BS EN 50267-2-3-1999 | 燃烧情况下电缆的一般检验方法.电缆材料燃烧时产生的气体的试验.程序.通过测量Ph值和传导率的加权平均值测 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity |
BS EN 50288-1-2004 | 模拟和数字通讯及控制中使用的多元件金属电缆.通用规范 | Multi-element metallic cables used in analogue and digital communication and control - Generic specification |
BS EN 50288-2-1-2004 | 模拟和数字通信及控制中使用的多元件金属电缆.水平和建筑物的主电缆 | Multi-element metallic cables used in analogue and digital communication and control - Horizontal and building backbone cables - Horizontal and building backbone cables |
BS EN 50288-2-2-2004 | 模拟和数字通信及控制中使用的多元件金属电缆.100MHz及以下的铠装电缆分规范.工作区域和临时线路的软线电缆 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 100 MHz - Work area and patch cord cables |
BS EN 50288-3-1-2004 | 模拟和数字通信及控制中使用的多元件金属电缆.100MHz及以下的非铠装电缆分规范.水平和建筑物的主电缆 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterized up to 100 MHz - Horizontal and building backbone cables |
BS EN 50288-3-2-2004 | 模拟和数字通信及控制中使用的多元件金属电缆.非屏蔽电缆分规范.工作区域和临时线路的软线电缆 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables - Work area and patch cord cables |
BS EN 50288-4-1-2004 | 模拟和数字通信及控制中使用的多元件金属电缆.600MHz及以下的铠装电缆分规范.水平和建筑物的主电缆 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 600 MHz - Horizontal and building backbone cables |
BS EN 50288-4-2-2004 | 模拟和数字通信及控制中使用的多元件金属电缆.600MHz及以下的屏蔽电缆分规范.工作区域和临时线路的软线电缆 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 600 MHz - Work area and patch cord cables |
BS EN 50288-5-1-2004 | 模拟和数字通信及控制中使用的多元件金属电缆.不足250MHz的铠装电缆分规范.水平和建筑物主干电缆 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables |
BS EN 50288-5-2-2004 | 模拟和数字通信及控制中使用的多元件金属电缆.250MHz及以下的铠装电缆分规范.工作区域和中继电缆 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables |
BS EN 50288-6-1-2004 | 模拟和数字通信及控制中使用的多元件金属电缆.250MHz及以下的非铠装电缆分规范.水平和建筑物主电缆 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables |
BS EN 50288-6-2-2004 | 模拟和数字通信及控制中使用的多元件金属电缆.250MHz及以下的非铠装电缆分规范.工作区域和中继电缆 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables |
BS EN 50289-1-1-2001 | 通信电缆.试验方法规范.电气试验方法.一般要求 | Communication cables - Specifications for test methods - Electrical test methods - General requirements - General requirements |
BS EN 50289-1-10-2002 | 通信电缆.试验方法规范.电气试验方法.串音 | Communication cables - Specifications for test methods - Electrical test methods - Crosstalk |
BS EN 50289-1-11-2002 | 通信电缆.试验方法规范.电气试验方法.特性阻抗、输入阻抗、回路损耗 | Communication cables - Specifications for test methods - Electrical test methods - Characteristic impedance, input impedance, return loss |
BS EN 50289-1-12-2005 | 通信电缆.试验方法规范.电气试验方法.电感 | Communication cables - Specifications for test methods - Electrical test methods - Inductance |
BS EN 50289-1-13-2004 | 通信电缆.试验方法规范.电气试验方法.接插线/同轴电缆配件/预连接电缆的耦合衰减或屏蔽衰减 | Communication cables - Specifications for test methods - Electrical test methods - Coupling attenuation or screening attenuation of patch cords/coaxial cable assemblies/pre-connectorised cables |
BS EN 50289-1-14-2004 | 通信电缆.试验方法规范.连接硬件的耦合衰减或屏蔽衰减 | Communication cables - Specifications for test methods - Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware |
BS EN 50289-1-15-2004 | 通信电缆.试验方法规范.电磁性能.链路和信道的耦合衰减(实验室条件) | Communication cables - Specifications for test methods - Electromagnetic performance - Coupling attenuation of links and channels (laboratory conditions) |
BS EN 50289-1-2-2001 | 通信电缆.试验方法规范.电气试验方法.直流电阻 | Communication cables - Specifications for test methods - Electrical test methods - DC resistance - d.c.resistance |
BS EN 50289-1-3-2001 | 通信电缆.试验方法规范.电气试验方法.介电强度 | Communication cables - Specifications for test methods - Electrical test methods - Dielectric strength - Dielectric strength |
BS EN 50289-1-4-2001 | 通信电缆.试验方法规范.电气试验方法.耐绝缘性 | Communication cables - Specifications for test methods - Electrical test methods - Insulation resistance |
BS EN 50289-1-5-2001 | 通信电缆.试验方法规范.电气试验方法.电容.第5节:电容 | Communication cables - Specifications for test methods - Electrical test methods - Capacitance - SEC5 : Capacitance |
BS EN 50289-1-6-2002 | 通信电缆.试验方法规范.电气试验方法.电磁性能 | Communication cables - Specifications for test methods - Electrical test methods - Electromagnetic performance |
BS EN 50289-1-7-2001 | 通信电缆.试验方法规范.电气试验方法.传播速度.第7节:传播速度 | Communication cables - Specifications for test methods - Electrical test methods - Velocity of propagation - sec7 : Velocity of propagation |
BS EN 50289-1-8-2001 | 通信电缆.试验方法规范.电气试验方法.衰减.第8节:衰减 | Communication cables - Specifications for test methods - Electrical test methods - Attentuation - Sec8 : attentuation |
BS EN 50289-1-9-2002 | 通信电缆.试验方法规范.电气试验方法.不平衡衰减(轴向转换损耗,轴向转换传送损耗) | Communication cables - Specifications for test methods - Electrical test methods - Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss) |
BS EN 50289-3-1-2001 | 通信电缆.试验方法规范.机械试验方法.一般要求 | Communication cables - Specifications for test methods - Mechanical test methods - General requirements - General requirements |
BS EN 50289-3-10-2005 | 通信电缆.试验方法规范.机械试验方法.扭转 | Communication cables - Specifications for tests methods - Mechanical test methods - Torsion and twisting |
BS EN 50289-3-11-2001 | 通信电缆.试验方法规范.机械试验方法.电缆抗切通性 | Communication cables - Specifications for test methods - Mechanical test methods - Cable cut-through resistance |
BS EN 50289-3-12-2001 | 通信电缆.试验方法规范.机械试验方法.强迫性损伤 | Communication cables - Specifications for test methods - Mechanical test methods - Shot gun damage |
BS EN 50289-3-13-2003 | 通信电缆.试验方法规范.机械试验方法.风成振动 | Communication cables - Specifications for test methods - Mechanical test methods - Aeolian vibration |
BS EN 50289-3-15-2003 | 通信电缆.试验方法规范.机械试验方法.海底电缆耐静水压力 | Communication cables - Specifications for test methods - Mechanical test methods - Underwater cable resistance to hydrostatic pressure |
BS EN 50289-3-16-2001 | 通信电缆.试验方法规范.机械试验方法.电缆抗拉性能 | Communication cables - Specifications for test methods - Mechanical test methods - Cable tensile performance |
BS EN 50289-3-17-2002 | 通信电缆.试验方法规范.机械试验方法.电介质和护套的粘合性 | Communication cables - Specifications for test methods - Mechanical test methods - Adhesion of dielectric and sheath |
BS EN 50289-3-2-2001 | 通信电缆.试验方法规范.机械试验方法.导体抗拉强度和弹性 | Communication cables - Specifications for test methods - Mechanical test methods - Tensile strength and elongation for conductor |
BS EN 50289-3-4-2001 | 通信电缆.试验方法规范.机械试验方法.绝缘护套抗拉强度、弹性和收缩性 | Communication cables - Specifications for test methods - Mechanical test methods - Tensile strength, elongation and shrinkage of insulation and sheath |
BS EN 50289-3-5-2001 | 通信电缆.试验方法规范.机械试验方法.电缆抗破碎性 | Communication cables - Specifications for test methods - Mechanical test methods - Crush resistance of the cable |
BS EN 50289-3-6-2001 | 通信电缆.试验方法规范.机械试验方法.电缆抗冲击性 | Communication cables - Specifications for test methods - Mechanical test methods - Impact resistance of the cable |
BS EN 50289-3-7-2001 | 通信电缆.试验方法规范.机械试验方法.电缆护套耐磨性 | Communication cables - Specifications for test methods - Mechanical test methods - Abrasion resistance of the cable sheath |
BS EN 50289-3-8-2001 | 通信电缆.试验方法规范.机械试验方法.电缆护套标记耐磨性 | Communication cables - Specifications for test methods - Mechanical test methods - Abrasion resistance of cable sheath markings |
BS EN 50289-3-9-2001 | 通信电缆.试验方法规范.机械试验方法.弯曲试验 | Communication cables - Specifications for test methods - Mechanical test methods - Bending tests |
BS EN 50289-4-1-2001 | 通信电缆.试验方法规范.环境试验方法.一般要求 | Communication cables - Specifications for test methods - Environmental test methods - General requirements |
BS EN 50289-4-11-2002 | 通信电缆.试验方法规范.环境试验方法.横向组合燃烧试验方法 | Communication cables - Specifications for test methods - Environmental test methods - A horizontal integrated fire test method |
BS EN 50289-4-12-2004 | 通信电缆.试验方法规范.环境试验方法.小型束状通信电缆上的垂直火焰扩散试验 | Communication cables - Specifications for test methods - Environmental test methods - Vertical flame spread test on bunched small communication cables |
BS EN 50289-4-14-2003 | 通信电缆.试验方法规范.环境试验方法.闪电 | Communication cables - Specifications for test methods - Environmental test methods - Lightning |
BS EN 50289-4-2-2001 | 通信电缆.试验方法规范.环境试验方法.水渗透性 | Communication cables - Specifications for test methods - Environmental test methods - Water penetration |
BS EN 50289-4-6-2001 | 通信电缆.试验方法规范.环境试验方法.温度循环 | Communication cables - Specifications for test methods - Environmental test methods - Temperature cycling |
BS EN 50289-4-9-2001 | 通信电缆.试验方法规范.环境试验方法.耐气动性 | Communication cables - Specifications for test methods - Environmental test methods - Pneumatic resistance |
BS EN 50290-1-1-2001 | 通信电缆.总则 | Communication cables - General |
BS EN 50290-1-2-2004 | 通信电缆.定义 | Communication cables - Definitions |
BS EN 50290-2-1-2005 | 通信电缆.通用设计原则和结构 | Communication cables - Common design rules and construction |
BS EN 50290-2-20-2001 | 通信电缆.通用设计规则和制造.总则 | Communication cables - Common design rules and construction - General |
BS EN 50290-2-21-2002 | 通信电缆.通用设计规则和制造.PVC绝缘化合物 | Communication cables - Part 2-21: Common design rules and construction - PVC insulation compounds |
BS EN 50290-2-22-2002 | 通信电缆.通用设计规则和制造.PVC铠装化合物 | Communication cables - Part 2-22: Common design rules and construction - PVC sheathing compounds |
BS EN 50290-2-23-2002 | 通信电缆.通用设计规则和制造.PE绝缘材料 | Communication cables - Part 2-23: Common design rules and construction - PE insulation |
BS EN 50290-2-24-2002 | 通信电缆.通用设计规则和制造.聚乙烯铠装化合物 | Communication cables - Common design rules and construction - PE sheathing |
BS EN 50290-2-25-2002 | 通信电缆.通用设计规则和制造.聚丙烯绝缘化合物 | Communication cables - Common design rules and construction - Polypropylene insulation compounds |
BS EN 50290-2-26-2002 | 通信电缆.通用设计规则和制造.无卤素的阻燃绝缘化合物 | Communication cables - Common design rules and construction - Halogen free flame retardant insulation compounds |
BS EN 50290-2-27-2002 | 通信电缆.一般设计规则和制造.无卤素的阻燃热塑性铠装化合物 | Communication cables - Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds |
BS EN 50290-2-28-2002 | 通信电缆.通用设计规则和制造.填充电缆用填充化合物 | Communication cables - Common design rules and construction - Filling compounds for filled cables |
BS EN 50290-2-29-2002 | 通信电缆.通用设计规则和制造.交联聚乙烯绝缘化合物 | Communication cables - Common design rules and construction - Cross-linked PE insulation compounds |
BS EN 50290-2-30-2002 | 通信电缆.通用设计规则和制造.聚四氟乙烯 - 聚六氟丙烯(FEP)绝缘和铠装化合物 | Communication cables - Common design rules and construction - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing |
BS EN 50290-4-1-2002 | 通信电缆.电缆使用的全面考虑.环境条件和安全 | Communication cables - General considerations for the use of cables - Environmental conditions and safety aspects |
BS EN 50299-2002 | UDOWNm设备的最高电压从72.5 kV - 550 kV的变压器和电抗器用浸油式电缆连接组件 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV |
BS EN 50300-2004 | 低压开关装置和控制装置组件.低压变电所电缆分线板的一般要求 | Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards |
BS EN 50306-1-2002 | 铁路设施.有专门防火性能的铁路机车车辆电缆.薄壁.一般要求 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - General requirements |
BS EN 50306-2-2002 | 铁路设施.有专门防火性能的铁路机车车辆电缆.薄壁.单芯电缆 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Single core cables |
BS EN 50306-3-2002 | 铁路设施.有专门防火性能的铁路机车车辆电缆.薄壁.单芯和多芯电缆(双芯、三芯和四芯)的屏障及薄壁护套 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed |
BS EN 50306-4-2002 | 铁路设施.有专门防火性能的铁路机车车辆电缆.薄壁.标准壁护套的多芯和多对电缆 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Multicore and multipair cables standard wall sheathed |
BS EN 50307-2003 | 铅和铅合金.电缆的铅和铅合金护套和套管 | Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables |
BS EN 50334-2001 | 电缆芯线识别用符号标记 | Marking by inscription for the identification of cores of electric cables |
BS EN 50336-2002 | 不超过36kV的变压器和电抗器电缆盒用套管 | Bushings for transformers and reactor cable boxes not exceeding 36 kV |
BS EN 50340-2002 | 电缆切割液压装置.用于公称电压在交流30KV以下电气设施的电缆切割装置 | Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV |
BS EN 50343-2003 | 铁路设施.铁路车辆.电缆敷设的安装规则 | Railway applications - Rolling stock - Rules for installation of cabling |
BS EN 50346-2003 | 信息技术.电缆安装.已安装的电缆的检验 | Information technology - Cabling installation - Testing of installed cabling |
BS EN 50355-2003 | 铁路设施.有特殊防火效能的铁路机车电缆.薄壁和标准壁.使用指南 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall and standard wall - Guide to use |
BS EN 50356-2002 | 电缆的火花试验方法 | Method for spark testing of cables |
BS EN 50362-2003 | 应急电路中使用的大型无防护电力电电源和控制电缆的耐火性的试验方法 | Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits |
BS EN 50363-0-2005 | 低压电缆用绝缘、铠装和包覆材料.一般介绍 | Insulating, sheathing and covering materials for low voltage energy cables - General introduction |
BS EN 50363-1-2005 | 低压电缆用绝缘、铠装和包覆材料.交联绝缘复合物 | Insulating, sheathing and covering materials for low voltage energy cables — Part 1: Cross-linked elastomeric insulating compounds |
BS EN 50363-2-1-2005 | 低压电缆用绝缘、铠装和包覆材料.交联弹性铠装复合物 | Insulating, sheathing and covering materials for low voltage energy cables — Part 2-1: Cross-linked elastomeric sheathing compounds |
BS EN 50363-2-2-2005 | 低压电缆用绝缘、铠装和包覆材料.交联弹性包覆复合物 | Insulating, sheathing and covering materials for low voltage energy cables — Part 2-2: Cross-linked elastomeric covering compounds |
BS EN 50363-3-2005 | 低压电缆用绝缘、铠装和包覆材料.PVC绝缘复合物 | Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds |
BS EN 50363-4-1-2005 | 低压电缆用绝缘、铠装和包覆材料. PVC铠装复合物 | Insulating, sheathing and covering materials for low voltage energy cables — Part 4-1: PVC sheathing compounds |
BS EN 50363-4-2-2005 | 低压电缆用绝缘、铠装和包覆材料.PVC包覆复合物 | Insulating, sheathing and covering materials for low voltage energy cables — Part 4-2: PVC covering compounds |
BS EN 50368-2003 | 电气装置用电缆夹具 | Cable cleats for electrical installations |
BS EN 50369-2005 | 电缆管理用防水铠装系统 | Liquid tight sheathing systems for cable management |
BS EN 50406-1-2004 | 高比特率电信网络用端用户多组电缆.架空电缆 | End user multi-pair cables used in high bit rate telecommunication networks - Aerial cables |
BS EN 50406-2-2004 | 高比特率电信网络用端用户多组电缆.管道和地下电缆 | End user multi-pair cables used in high bit rate telecommunication networks - Duct and buried cables |
BS EN 50407-1-2004 | 高比特率数字存取电信网络用多组电缆.室外电缆 | Multi-pair cables used in high bit rate digital access telecommunication networks - Outdoor cables |
BS EN 50414-2006 | 聚氯乙烯绝缘和护套光电纤维电缆铅分析的试验方法.方法A:用火焰激发原子吸收光谱测定法测定法含铅总量测定. | Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by lead sulphide staining |
BS EN 60169-24-1994 | 射频连接器.带螺旋耦合器的射频同轴连接器(主要用于75ΩF型电缆分配系统) | Radio-frequency connectors - Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F) |
BS EN 60169-25-1994 | 射频连接器.同带有内孔的外导体内径为13.56mm(0.534in)TWHN型双内导体屏蔽对称电缆一起使用的双柱螺旋(<3/4 | Radio-frequency connectors - Two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (Type TWHN) |
BS EN 60228-2005 | 绝缘电缆导线 | Conductors of insulated cables |
BS EN 60230-2002 | 电缆及其附件的脉冲试验 | Impulse tests on cables and their accessories |
BS EN 60332-1-1-2005 | 着火条件下电缆和光缆的试验.单根绝缘电线或电缆的垂直火焰蔓延的试验.装置 | Tests on electrical and optical cables under fire conditions - Test for a vertical flame propagation for a single insulated wire or cable - Apparatus |
BS EN 60332-1-2-2004 | 着火条件下电缆和光缆的试验.单股绝缘电线或电缆的垂直火焰蔓延的试验.1kW预混合火焰规程 | Tests on electric and optical fibre cables under fire conditions - Test for vertfical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame |
BS EN 60332-1-3-2004 | 着火条件下电缆和光缆的试验.单股绝缘电线或电缆的垂直火焰蔓延的试验.燃烧的微滴/颗粒的测定程序 | Tests on electric and optical fibre cables under fire conditions - Test for vertical flame propagation for a single vertical insulated wire or cable - Procedure for determination of flaming droplets/particles |
BS EN 60332-2-1-2005 | 着火条件下电缆和光缆的试验.单根小型绝缘电线或电缆的垂直火焰蔓延的试验.装置 | Tests on electric and optical fibre cables under fire conditions - Test for vertical flame propagation for a single small insulated wire or cable - Apparatus |
BS EN 60332-2-2-2004 | 着火条件下电缆和光缆的试验.单股绝缘电线或电缆的垂直火焰蔓延的试验.扩散火焰法 | Tests on electric and optical fibre cables under fire conditions - Tests for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame |
BS EN 60371-3-8-1996 | 云母基绝缘材料规范.第3部分:单项材料规范.第8活页:耐燃烧安全电缆用云母纸带 | Specification for insulating materials based on mica - Specifications for individual materials - Mica paper tapes for flame-resistant security cables |
BS EN 60439-5-1996 | 低压开关设备和控制设备组件.第5部分:室外公共场所安装用组件专门要求.网络电力分配电缆交接箱 | Specification for low-voltage switchgear and controlgear assemblies - Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks |
BS EN 60465-1992 | 电缆用带油导管的未使用过的绝缘矿物油规范 | Specification for unused insulating mineral oils for cables with oil ducts |
BS EN 60526-2005 | 医用X射线设备高压电缆插头和插座的连接 | High-voltage cable plug and socket connections for medical X-ray equipment |
BS EN 60603-9-1998 | 印制板用频率低于3MHz的连接器.2.54mm(0.1in)基本网格印制电路板、底板和电缆连接器用两件连接器 | Connectors for frequencies below 3 MHz for use with printed boards - Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) |
BS EN 60702-1-2002 | 额定电压不超过750V的矿物绝缘电缆及其终端.电缆 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Cables |
BS EN 60702-2-2002 | 额定电压不超过750V的矿物绝缘电缆及其终端.终端 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Terminations |
BS EN 60719-1993 | 额定电压达450/750V(含)圆铜导线电缆平均外部尺寸上限和下限的计算 | Calculation for the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V |
BS EN 60728-6-2003 | 电视和声音信号及交互服务用电缆网络.光学设备 | Cable networks for television signals, sound signals and interactive services - Optical equipment |
BS EN 60728-7-1-2005 | 电视信号、声音信号和交互信号设备用电缆网络.混合光纤同轴电缆外部设备状况监测.物理层(PHY)规范 | Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Physical (PHY) layer specification |
BS EN 60728-7-2-2005 | 电视信号、声音信号和交互设备用电缆网络.混合光纤同轴电缆外部设备状况监测.媒体访问控制层(MAC)规范 | Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Media access control (MAC) layer specification |
BS EN 60728-7-3-2005 | 电视信号、声音信号和交互设备用电缆网络.混合光纤同轴电缆外部设备状况监测.电力转发器接口总线(PSTIB).规 | Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Power supply to transponder interface bus (PSTIB) - Specification |
BS EN 60794-1-1-2002 | 光纤电缆.一般规范.总则 | Optical fibre cables - Generic specification - General |
BS EN 60794-1-2-2003 | 光学纤维电缆.总规范.基础光缆试验规程 | Optical fibre cables - Generic specification - Basic optical cable test procedures |
BS EN 60794-2-11-2005 | 光纤电缆.室内电缆.规整化布线系用单双电缆的详细规范 | Optical fibre cables — Part 2-11: Indoor cables — Detailed specification for simplex and duplex cables for use in premises cabling |
BS EN 60794-2-21-2006 | 光缆.室内光缆.房屋布线用多纤维光学配电电缆的详细规范 | Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution Cables for use in premises cabling |
BS EN 60794-2-31-2006 | 光缆.室内光缆.房屋布线用光纤带状电缆的详细规范 | Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling |
BS EN 60794-3-10-2002 | 光纤电缆.户外电缆.导管和直接掩埋的光通信电缆的系列规范 | Optical fibre cables - Outdoor cables - Family specification for duct and directly buried optical telecommunication cables |
BS EN 60794-3-20-2003 | 光缆.户外电缆.自立式架空通信光缆的系列规范 | Optical fibre cables - Outdoor cables - Family specification for optical self-supporting aerial telecommunication cables |
BS EN 60794-3-2002 | 光缆.分规范.户外电缆 | Optical fibre cables - Sectional specification - Outdoor cables |
BS EN 60811-1-1-1995 | 电缆绝缘和护套材料.通用试验方法.一般应用.厚度和总尺寸测量.机械性能测定试验 | Insulating and sheathing materials of electric cables - Common test methods - General application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties |
BS EN 60811-1-2-1995 | 电缆绝缘和护套材料通用试验方法.第1部分:一般应用.第2节:热老化方法 | Insulating and sheathing materials of electric cables - Common test methods - General application - Thermal ageing methods |
BS EN 60811-1-3-1995 | 电缆绝缘和护套材料.通用试验方法.一般应用.密度测定方法.吸水试验.收缩试验 | Insulating and sheathing materials of electric cables - Common test methods - General application - Methods for determining the density - Water absorption tests - Shrinkage test - Section 3: Methods for determining the density - Water absorption tests - Shrinking test |
BS EN 60811-1-4-1995 | 电缆绝缘和护套材料.通用试验方法.第1部分:一般应用方法.第4节:低温试验 | Insulating and sheathing materials of electric cables - Common test methods - General application - Tests at low temperature |
BS EN 60811-2-1-1998 | 电缆绝缘和护套材料.通用试验方法.弹性化合物专用试验方法.耐臭氧性、热固化及矿物油浸渍试验 | Insulating and sheathing materials of electric cables - Common test methods - Methods specific to elastomeric compounds - Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests |
BS EN 60811-3-1-1995 | 电缆的绝缘和护套材料.通用试验方法.聚氯乙烯专用方法.高温下压力试验.耐裂性试验 | Insulating and sheathing materials of electric cables - Common test methods - Methods specific to PVC compounds - Pressure test at high temperature - Tests for resistance to cracking |
BS EN 60811-3-2-1995 | 电缆绝缘和护套材料.通用试验方法.聚氯乙烯(PVC)化合物专用方法.质量损失试验.热稳定性试验 | Insulating and sheathing materials of electric cables - Common test methods - Methods specific to PVC compounds - Loss of mass test - Thermal stability test |
BS EN 60811-4-1-2004 | 电缆和光缆的绝缘和护套材料.通用试验方法.聚丙烯和聚丙烯化合物专用方法.抗环境应力致裂.熔化流动指数测量 | Insulating and sheathing materials of electric and optical cables - Common test methods - Methods specific to polypropylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filter content measurement in PE by direct combustion - Measurement of carbon black content by TGA - Assessment of carbon black dispersion in polyethylene using a microscope |
BS EN 60811-4-2-2004 | 电缆和光缆的绝缘和护套材料.通用试验方法.聚乙烯和聚丙烯化合物专用方法.高温处理后抗拉强度和断裂伸长度. | Insulating and sheathing materials of electric and optical cables - Common test methods - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation |
BS EN 60811-5-1-2000 | 电缆的绝缘和护套材料.通用试验方法.填充复合物的专用方法.滴点.油分离.低温脆性.总酸值.无腐蚀性成分.23℃ | Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C |
BS EN 60874-17-1997 | 光纤和电缆的连接器.纤维光学连接器的部分规范.F-05型(磨擦锁定) | Connectors for optical fibres and cables - Sectional specification for fibre optic connector - Type F-05 (friction lock) |
BS EN 60885-2-2003 | 电缆的电气试验方法.局部放电试验 | Electrical test methods for electric cables - Partial discharge tests |
BS EN 60885-3-2003 | 电缆的电气试验方法.测量挤压电力电缆段局部放电的试验方法 | Electrical test methods for electric cables - Test methods for partial discharge measurements on lengths of extruded power cables |
BS EN 60966-1-1999 | 射频与同轴电缆组件.通用规范.一般要求和试验方法 | Radio frequency and coaxial cable assemblies - Generic specification - General requirements and test methods |
BS EN 60966-2-1-2003 | 射频同轴电缆组件.柔软同轴电缆组件分规范 | Radio frequency and coaxial cable assemblies - Sectional specification for flexible coaxial cable assemblies |
BS EN 60966-2-2-2003 | 射频同轴电缆组件.柔软同轴电缆组件空白详细规范 | Radio frequency and coaxial cable assemblies - Blank detail specification for flexible coaxial cable assemblies |
BS EN 60966-2-3-2003 | 射频同轴电缆组件.柔软同轴电缆组件详细规范 | Radio frequency and coaxial cable assemblies - Detail specification for flexible coaxial cable assemblies |
BS EN 60966-2-4-2003 | 射频和同轴电缆组件.无线电和电视接收机用0-3000MHz、使用IEC 61169-2连接器的电缆组件的详细规范 | Radio frequency and coaxial cable assemblies - Detail specification for cable assemblies for radio and TV receivers Frequency range 0 to 3000 MHz, IEC 61169-2 connectors |
BS EN 60966-2-5-2003 | 射频和同轴电缆组件.无线电和电视接收机用0-1000MHz、使用IEC 61169-2连接器的电缆组件详细规范 | Radio frequency and coaxial cable assemblies - Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 1000 MHz, IEC 61169-2 connectors |
BS EN 60966-2-6-2003 | 射频和同轴电缆组件.无线电和电视接收机用0-3000MHz、使用IEC61169-24连接器的电缆组件详细规范 | Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 3000 MHz, IEC 61169-24 connectors |
BS EN 60966-3-1-2003 | 射频同轴电缆组件.半柔软同轴电缆组件空白详细规范 | Radio frequency and coaxial cable assemblies - Blank detail specification for semi-flexible coaxial cable assemblies |
BS EN 60966-3-2-2003 | 射频同轴电缆组件.GSM(0.8GHz-1GHz)用半柔软同轴电缆组件详细规范 | Radio frequency and coaxial cable assemblies - Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz) |
BS EN 60966-3-2003 | 射频同轴电缆组件.半柔软同轴电缆组件分规范 | Radio frequency and coaxial cable assemblies - Sectional specification for semi-flexible coaxial cable assemblies |
BS EN 60966-4-1-2003 | 射频同轴电缆组件.半硬同轴电缆组件空白详细规范 | Radio frequency and coaxial cable assemblies - Blank detail specification for semi-rigid coaxial cable assemblies |
BS EN 60966-4-2003 | 射频同轴电缆组件.半硬性同轴电缆组件分规范 | Radio frequency and coaxial cable assemblies - Sectional specification for semi-rigid coaxial cable assemblies |
BS EN 61034-2-2005 | 在规定条件下燃烧的电缆烟雾密度测量.试验程序和要求 | Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements |
BS EN 61076-3-103-2004 | 有质量评定的直流低频模拟及数字高速数据应用系统用连接器.矩形连接器.高速串行数据(HSSDC)用带1.25mm间距 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) |
BS EN 61076-4-103-1999 | 经过质量评定的直流低频模拟及数字高速数据系统用连接器.印制电路板连接器.带屏蔽和2.5mm基栅的两件式连接 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm - Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards |
BS EN 61076-4-108-2003 | 电子设备连接器.经质量评定的印制板连接器.符合IEC 60917-1的基本网格为2.5mm、有25mm模数间距和集成屏蔽功 | Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
BS EN 61076-4-110-2002 | 直流低频模拟和数字高速数据设备用经质量评定的连接器.印制板连接器.2.0mm基本栅级的并具有完全屏蔽和锁定 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function |
BS EN 61076-7-001-2004 | 电子设备连接器.电缆引出端附件.空白详细规范 | Connectors for electronic equipment - Cable outlet accessories - Blank detail specification |
BS EN 61138-1998 | 便携式接地设备和短路电流设备用电缆 | Cables for portable earthing and short-circuiting equipment |
BS EN 61169-24-2002 | 射频连接器.分规范.通常用于75欧姆电缆配电系统带螺纹连接的射频同轴连接器(F型) | Radio-frequency connectors - Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F) |
BS EN 61196-2-2003 | 射频电缆.规范.聚四氟乙烯(PTFE)绝缘半硬射频同轴电缆分规范 | Radio-frequency cables - Specifications - Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation |
BS EN 61196-3-1999 | 射频电缆.规范.局域网用同轴电缆分规范 | Radio-frequency cables - Specifications - Sectional specification for coaxial cables for local area networks |
BS EN 61196-3-2-1998 | 射频电缆.规范.水平地面布线数字通信用同轴电缆.工作半径为185m,每秒通过字节最高达10Mb的局域网用带固体电 | Radio-frequency cables - Specifications - Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s |
BS EN 61196-3-3-1998 | 射频电缆.规范.水平地面布线数字通信用同轴电缆.工作半径为185m,每秒通过字节达10Mb的局域网用带泡沫电介质 | Radio-frequency cables - Specifications - Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s |
BS EN 61196-4-2004 | 同轴通信电缆.辐射电缆分规范 | Coaxial communication cables - Sectional specification for radiating cables |
BS EN 61238-1-2003 | 额定电压为36KV(Um=42 kV)及以下的电力电缆用压接和机械连接器.试验方法和要求 | Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Test methods and requirements |
BS EN 61242-1998 | 电气附件.家用和类似用途电缆卷轴 | Electrical accessories - Cable reels for household and similar purposes |
BS EN 61280-1-1-1998 | 光纤放大器.基本光谱分析仪.单模光纤电缆用发射机光输出功率测量 | Optical fibre amplifiers.Basic spectrum analyzers - Transmitter output optical power measurement for single-mode optical fibre cable |
BS EN 61280-4-2-2000 | 光纤通信分系统基本试验程序.光纤电缆性能指标.单模光纤电缆性能指标的衰减 | Fibre optic communication subsystem basic test procedures - Fibre optic cable plant - Single-mode fibre optic cable plant attenuation |
BS EN 61300-2-35-1997 | 光纤互联装置和无源部件.基本试验和测量程序.第2部分第35节:试验.电缆下垂 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable nutation |
BS EN 61300-2-37-1997 | 光纤互联装置和无源部件.基本试验和测量程序.第37节:试验.闭路用电缆弯曲 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable bending for closures |
BS EN 61300-2-4-1997 | 光纤互联装置和无源部件.基本试验和测量程序.试验.纤维/电缆牢固性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Fibre/cable retention |
BS EN 61313-1-1997 | 光纤无源部件和电缆组件.第1部分:能力鉴定.通用规范 | Fibre optic passive components and cable assemblies - Capability approval - Generic specification |
BS EN 61316-2000 | 工业电缆卷轴 | Industrial cable reels |
BS EN 61386-1-2004 | 电缆管理的导管系统.通用要求 | Conduit systems for cable management - General requirements |
BS EN 61386-21-2004 | 电缆管理用导管系统.特殊要求.刚性导管系统 | Conduit systems for cable management - Particular requirements - Rigid conduit systems |
BS EN 61386-22-2004 | 电缆管理用导管系统.特殊要求.可弯曲的导管系统 | Conduit systems for cable management - Particular requirements - Pliable conduit systems |
BS EN 61386-23-2004 | 电缆管理用导管系统.特殊要求.挠性导管系统 | Conduit systems for cable management - Particular requirements - Flexible conduit systems |
BS EN 61442-2005 | 额定电压6-36kV(Um=7.2-42kV)的电力电缆附件的试验方法 | Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV) |
BS EN 61515-1996 | 矿物绝缘热电偶电缆和热电偶 | Mineral insulated thermocouple cables and thermocouples |
BS EN 61537-2002 | 电缆管理用电缆槽系统和电缆梯架系统 | Cable tray systems and cable ladder systems for cable management |
BS EN 61726-2000 | 电缆组件、电缆、连接器和无源微波元件.用混响室法测量滤屏衰减 | Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method |
BS EN 61935-1-2005 | 根据EN 50173标准系列:已安装电缆的规定对对称通信布线进行检验 | Testing of balanced communication cabling in accordance with standards series EN 50173 — Part 1: Installed cabling |
BS EN 61935-2-2005 | 根据EN 50173标准系列:接线电缆和工作区电缆规定对对称通信布线进行检验 | Testing of balanced communication cabling in accordance with standards series EN 50173 — Part 2: Patch cords and work area cords |
BS EN 62012-1-2002 | 在条件恶劣环境中数字通信用两芯/四芯电缆.总规范 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Generic specification |
BS EN 62037-2000 | 射频连接器.连接器电缆组件和电缆.互调电平测量 | RF connectors, connector cable assemblies and cables - Intermodulation level measurement |
BS EN 62153-1-1-2004 | 金属通信电缆试验方法.电气.用离散傅里叶逆变换测量频域中的脉冲/分步回程损失 | Metallic communication cables test methods - Electrical - Measurement of the pulse/step return loss in the frequency domain using the inverse discrete fourier transformation(IDFT) |
BS EN 62153-4-2-2004 | 金属通信电缆试验方法.电磁兼容性(EMC).屏蔽和耦合衰减.注入夹紧法 | Metallic communication cable test methods - Electromagnetic compatibility - Screening and coupling attenuation - Injection clamp method |
BS EN ISO 10807-1997 | 管道工程.在爆燃性大气中电缆保护用皱纹软金属管组件 | Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere |
BS EN ISO 5828-2001 | 电阻焊设备.连接水冷接头的二次接线电缆.尺寸和特性 | Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics |
BS EN ISO 6551-1983 | 石油液体和气体.动态测量的精确性可靠性.电脉冲数据和/或电子脉冲数据的电缆传输 | Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data |
BS EN ISO 8205-1-2002 | 电阻焊用水冷辅助连接电缆.双芯连接电缆的尺寸和要求 | Water-cooled secondary connection cables for resistance welding - Dimensions and requirements for double-conductor connection cables |
BS EN ISO 8205-2-2002 | 电阻焊用水冷辅助连接电缆.单芯连接电缆的尺寸和要求 | Water-cooled secondary connection cables for resistance welding - Dimensions and requirements for single-conductor connection cables |
BS EN ISO 8205-3-1997 | 电阻焊接水冷次级线圈连接电缆.试验要求 | Water-cooled secondary connection cables for resistance welding - Test requirements |
BS G 177-1961 | 飞行器用Nyvin 型电缆规范 | Specification for Nyvin type electrical cables for aircraft |
BS G 184 to G 188-1964 | 航空用六角形压合铝制电缆的铝接线板端头和嵌入式连接器规范 | Specification for aluminium terminal ends and in-line connectors for hexagonal crimping to aircraft aluminium electrical cables |
BS G 189-1964 | 航空用Tersil型电缆规范 | Specification for Tersil type electrical cables for aircraft |
BS G 192-1965 | 航空用铜导线Efglas型电缆规范 | Specification for Efglas type electric cables with copper conductors for aircraft |
BS G 195-1966 | 航空用Minyvin型电缆规范 | Specification for Minyvin type electric cables for aircraft |
BS G 198-5-1997 | 航空用电缆和设备电线套筒.热收缩模型规范 | Sleeves for aircraft electric cables and equipment wires - Specification for heat shrinkable moulded shapes |
BS G 212-1971 | 航空用电缆的一般要求规范 | Specification for general requirements for aircraft electrical cables |
BS G 222-1976 | Efglas型电缆规范(公制单位) | Specification for Efglas type electric cables (metric units) |
BS G 227-1979 | Tersil型电缆规范(公制单位) | Specification for Tersil type electric cables (metric units) |
BS G 235-1987 | 一般机体或设备连接用镀银导体的150℃捆扎绝缘电缆规范 | Specification for electric cables for general airframe or equipment interconnect use (150 °C), wrapped insulation with silver plated conductors |
BS G 236-1987 | 一般机体或设备连接用镀镍导体的200℃捆扎绝缘电缆规范 | Specification for electric cables for general airframe or equipment interconnect use (200 °C), wrapped insulation with nickel plated conductors |
BS G 237-1987 | 一般机体或设备连接用镀镍导体的200℃挤制绝缘电缆规范 | Specification for electric cables for general airframe or equipment interconnect use (200 °C), extruded insulation with nickel plated conductors |
BS G 241-1988 | 发动机防火区和机体用耐火电缆规范 | Specification for fire proof electric cables for engine fire zone and airframe use |
BS G 243-1990 | 发动机用点火电缆规范(4kV直流) | Specification for igniter cables for engine use (4 kV d.c.) |
BS G 246-1991 | 航空用张力控制下电缆连接电缆配线规范 | Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses |
BS G 250-1994 | 电缆的识别标记规范 | Specification for identification marking of electric cables |
BS G 258-1995 | 电缆和电缆线术语词汇 | Glossary of terms for electrical cables and cable harnesses |
BS IEC 60287-1-3-2003 | 电缆.电流定额的计算.电流定额公式(100%负载因数)和损耗的计算.并联单芯电缆间的电流分配和环流损耗的计算 | Electric cables - Calculation of the current rating - Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses |
BS IEC 60313-2002 | 核实验室仪器用的同轴电缆连接器 | Coaxial connectors used in nuclear laboratory instrumentation |
BS IEC 60853-3-2002 | 电缆周期性和事故电流定额计算.不完全干燥土壤的一切电压电缆用周期定额因数 | Calculation of the cyclic and emergency current rating of cables - Cyclic rating factor for cables of all voltages, with partial drying of the soil |
BS IEC 60874-14-1-1998 | 光纤和电缆连接器.连接A1a,A1b型多模式纤维的SC-PC型标准光纤连接器的详细规范 | Connectors for optical fibres and cables - Detail specification for fibre optic connector type SC-PC standard terminated to multimode fibre type A1a, A1b |
BS IEC 61000-5-2-1998 | 电磁兼容性.安装和缓解指南.接地和电缆敷设 | Electromagnetic compatibility (EMC) - Installation and mitigation guidelines - Earthing and cabling |
BS ISO 13990-3-2006 | 纺织机械与附件.针织机用输纱器和纱控制器.连接尺寸和互连电缆 | Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Dimensions for connecting and interconnection cables |
BS ISO 3808-2003 | 道路车辆.无屏蔽高电压点火电缆.总规范、试验方法和要求 | Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements |
BS ISO 4141-1-2006 | 道路车辆.多芯连接电缆.基本性能铠装电缆的试验方法和要求 | Road vehicles - Multi-core connecting cables - Test methods and requirements for basic performance sheathed cables |
BS ISO 6856-2005 | 道路车辆.非屏蔽高压点火电缆组件.试验方法和一般要求 | Road vehicles - Unscreened high-voltage ignition cable assemblies - Test methods and general requirements |
BS ISO/IEC 11458-1994 | 信息技术.微处理器系统.VIC母线.内插件电缆母线 | Information technology. Microprocessor systems. VICbus. Inter-crate cable bus |
BS ISO/IEC 14709-1-1997 | 信息技术.顾客房屋电缆应用布局.综合服务数字网络( ISDN )基本通路 | Information technology - Configuration of customer premises cabling (CPC) for applications - ISDN basic access |
BS QC 221300-1997 | 射频连接器.外导体的内径为3mm(0.12in),搭锁固定的特性阻抗为50Ω的射频同轴电缆连接器(SMB型) | Radio-frequency connectors - RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 ohms (Type SMB) |
DD ENV 13149-2-2000 | 公共运输.道路车辆调度安排和控制系统.WORLDFIP敷设电缆规范 | Public transport. Road vehicle scheduling and control systems. WORLDFIP cabling specifications |
DD IEC PAS 62255-1-2001 | 高比特率数字接入电信网络用多对电缆.户外电缆 | Multi-pair cables used in high bit rate digital access telecommunication networks. Outdoor Cables |
FD Z 86-154-1997 | 数字视频广播.MPEG-2系统的使用执行指南.卫星和电缆广播用的视频和音频 | DIGITAL VIDEO BROADCASTING (DVB). IMPLEMENTATION GUIDELINES FOR THE USE OF MPEG-2 SYSTEMS. VIDEO AND AUDIO IN SATELLITE AND CABLE BROADCASTING APPLICATIONS. |
KIT 79-2001 | 信息技术.电缆敷设装置 | Information technology - Cabling systems pack |
PD 6580-2-1995 | 住房和建筑物的电气系统.技术报告1.1类双芯电缆专用设备指南 | Home and building electronic systems.Technical report 1. Guidelines for the professional installation of Twisted Pair cables class 1 |
编号 | 中文名称 | 英文名称 |
仪器商城:www.17-18.cn
安规仪器网/美华安规仪器---追崇原创、重视知识产权和尊重劳动成果,也是行业发展主旨,禁止盗链、采集、复制及转载等非法行为,一经发现保留追责权力。有关标准和技术探讨,请联络邮箱:1484875858#qq.com(#改为@),QQ1484875858