深圳市美华安规仪器有限公司
地址: A. 深圳光明新区光明
圳美311号/518107
B. 东莞大岭山镇渭
溪路/523829
热线: 155-0203-6348;
136-1283-4185
电话: 0755-3288-5887
传真: 0755-3288-5887
Q Q: 1-4848-7-5858;
4-9327-8805
邮箱: sm#ag17.wang
okgang#163.com
(#请改@)
官网: www.ag17.wang
论坛: bbs.ag17.wang
编号 | 中文名称 | 英文名称 |
---|---|---|
EN 10257-1-1998 | 动力电缆或通信电缆铠甲用镀锌或锌合金的非合金钢电线 第1部分:地面电缆 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables |
EN 10257-2-1998 | 动力电缆或通信电缆铠甲用镀锌或锌合金的非合金钢电线 第2部分:海底电缆 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables |
EN 12548-1999 | 铅和铅合金 电缆铍和护套用铅合金铸锭 | Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves |
EN 12613-2001 | 具有可视特性的地下电缆和管线用塑料报警装置 | Plastics warning devices for underground cables and pipelines with visual characteristics |
EN 175500-1997 | 分规范:包括批准和能力批准的连接器用电缆引出端附件 | Sectional specification: Cable outlet accessories for connectors, including qualification approval and capability approval |
EN 187105-2002 | 单模光纤电缆(管道/直埋安装) | Single mode optical cable (duct/direct buried installation) |
EN 2083-2001 | 航空航天系列 电缆用铜和铜合金导体 产品标准 | Aerospace series - Copper or copper alloys conductors for electrical cables - Product standard |
EN 2355-1988 | 航空航天系统 控制电缆用耐腐蚀钢的螺纹叉形端 尺寸和负载 | Aerospace series - Fork-ends, threaded, control cable in corrosion resisting steel; Dimensions and loads |
EN 2591-610-2001 | 航空航天系列 光电连接元件 试验方法 第610部分:光学元件 电缆附件的效能 电缆拉力 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 610: Optical elements; Effectiveness of cable attachment; Cable pulling |
EN 2591-611-2001 | 航空航天系列 光电连接元件 试验方法 第611部分:光学元件 电缆附件的效能 电缆扭力 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 611: Optical elements; Effectiveness of cable attachment; Cable torsion |
EN 2591-612-2001 | 航空航天系列 光电连接元件 试验方法 第612部分:光学元件 电缆附件的效能 电缆轴向压力 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 612: Optical elements; Effectiveness of cable attachment; Cable axial compression |
EN 300429 V 1.2.1-1998 | 数字视频广播(DVB) 电缆系统用构架结构、频道编码和调制 | Digital Video Broadcasting (DVB) - Framing structure, channel coding and modulation for cable systems |
EN 3475-100-2002 | 航空航天系列 飞行器用的电缆 试验方法 第100部分:总则 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 100: General |
EN 3475-201-2002 | 航空航天系列 飞行器用的电缆 试验方法 第201部分:可视检查/注:适合与EN 3475-100结合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 201: Visual examination / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-202-2002 | 航空航天系列 飞行器用的电缆 试验方法 第202部分:质量/注:适合与EN 3475-100结合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 202: Mass / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-301-2002 | 航空航天系列 飞行器用的电缆 试验方法 第301部分:每单位长度的欧母电阻/注:适合与EN 3475-100结合使 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 301: Ohmic resistance per unit length / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-302-2002 | 航空航天系列 飞行器用的电缆 试验方法 第302部分:电压校检试验/注:适合与EN 3475-100结合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 302: Voltage proof test / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-303-2002 | 航空航天系列 飞行器用的电缆 试验方法 第303部分:绝缘电阻/注:适合与EN 3475-100结合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 303: Insulation resistance / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-304-2002 | 航空航天系列 飞行器用的电缆 试验方法 第304部分:表面电阻/注:适合与EN 3475-100结合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 304: Surface resistance / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-305-2002 | 航空航天系列 飞行器用的电缆 试验方法 第305部分:过载电阻/注:适合与EN 3475-100结合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 305: Overload resistance / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-401-2002 | 航空航天系列 飞行器用的电缆 试验方法 第401部分:加速老化/注:适合与EN 3475-100结合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 401: Accelerated ageing / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-402-2002 | 航空航天系列 飞行器用的电缆 试验方法 第402部分:收缩和脱层/注:适合与EN 3475-100结合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 402: Shrinkage and delamination / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-403-2002 | 航空航天系列 飞行器用的电缆 试验方法 第403部分:脱层和阻塞/注:适合与EN 3475-100结合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 403: Delamination and blocking / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-404-2002 | 航空航天系列 飞行器用的电缆 试验方法 第404部分:热冲击/注:适合与EN 3475-100结合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 404: Thermal shock / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-405-2002 | 航空航天系列 飞行器用的电缆 试验方法 第405部分:环境温度下的弯曲/注:适合与EN 3475-100结合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 405: Bending at ambient temperature / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-406-2002 | 航空航天系列 飞行器用的电缆 试验方法 第406部分:冷弯试验/注:适合与EN 3475-100结合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 406: Cold bend test / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-407-2002 | 航空航天系列 飞行器用的电缆 试验方法 第407部分:可燃性/注:适合与EN 3475-100结合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 407: Flammability / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-409-2002 | 航空航天系列 飞行器用的电缆 试验方法 第409部分:真空老化/注:适合与EN 3475-100结合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 409: Air-excluded ageing / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-410-2002 | 航空航天系列 飞行器用的电缆 试验方法 第410部分:耐热性/注:适合与EN 3475-100和 ASTM D 3032 (1986 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 410: Thermal endurance / Note: Applies only in conjunction with EN 3475-100 and ASTM D 3032 (1986) paragraph 14 |
EN 3475-412-2002 | 航空航天系列 飞行器用的电缆 试验方法 第412部分:防潮性能 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 412: Humidity resistance |
EN 3475-413-2002 | 航空航天系列 飞行器用的电缆 试验方法 第414部分:缠绕反向测试 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 413: Wrap back test |
EN 3475-501-2002 | 航空航天系列 飞行器用的电缆 试验方法 第501部分:动态切口/注:适合与EN 3475-100和 ASTM D 3032 (19 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 501: Dynamic out-through / Note: Applies only in conjunction with EN 3475-100 and ASTM D 3032 (1986) paragraph 22 |
EN 3475-502-2002 | 航空航天系列 飞行器用的电缆 测试方法 第502部分:切口扩散/注:适合与EN 3475-100 结合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 502: Notch propagation / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-503-2002 | 航空航天系列 飞行器用的电缆 测试方法 第503部分:擦伤磨损/注:适合与EN 3475-100 结合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 503: Scrape abrasion / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-504-2002 | 航空航天系列 飞行器用的电缆 测试方法 第504部分:扭转/注:适合与EN 3475-100 结合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 504: Torsion / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-505-2002 | 航空航天系列 飞行器用的电缆 测试方法 第505部分:导线和绞线的拉伸试验/注:适合与EN 3475-100结合使 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 505: Tensile test on conductors and strands / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-506-2002 | 航空航天系列 飞行器用的电缆 测试方法 第506部分:电镀连续性/注:适合与EN 3475-100结合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 506: Plating continuity / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-507-2002 | 航空航天系列 飞行器用的电缆 测试方法 第507部分:绝缘层与导体间的剥离性及粘附力/注:适合与EN 3475 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 507: Strippability and adherence of insulation to the conductor / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-508-2002 | 航空航天系列 飞行器用的电缆 测试方法 第508部分:电镀厚度 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 508: Plating thickness |
EN 3475-509-2002 | 航空航天系列 飞行器用的电缆 测试方法 第509部分:软焊性 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 509: Solderability |
EN 3475-510-2002 | 航空航天系列 飞行器用的电缆 测试方法 第510部分:铠装和包皮材料、抗张强度和挤压绝缘层的伸张度 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material |
EN 3475-511-2002 | 航空航天系列 飞行器用的电缆 试验方法 第511部分:电缆与电缆磨损 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion |
EN 3475-512-2002 | 航空航天系列 飞行器用的电缆 试验方法 第512部分:耐弯曲性 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 512: Flexure endurance |
EN 3475-603-2002 | 航空航天系列 飞行器用的电缆 试验方法 第603部分:抗湿弧轨迹性 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 603: Resistance to wet arc tracking |
EN 3475-604-2002 | 航空航天系列 飞行器用的电缆 试验方法 第604部分:抗干弧扩展性 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 604: Resistance to dry arc propagation |
EN 3475-605-2002 | 航空航天系列 飞行器用的电缆 试验方法 第605部分:湿短路试验 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 605: Wet short circuit test |
EN 3475-701-2002 | 航空航天系列 飞行器用的电缆 试验方法 第701部分:绝缘层与导体间的剥离性和粘附力/注:适合与EN 3475 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 701: Strippability / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-702-2002 | 航空航天系列 飞行器用的电缆 试验方法 第702部分:屏蔽抗冲击能力/注:适合与EN 3475-100结合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 702: Screen pushback capability / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-703-2002 | 航空航天系列 飞行器用的电缆 试验方法 第703部分:制造商标记的持久性/注:适合与EN 3475-100结合使 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 703: Permanence of manufacturers marking / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-704-2002 | 航空航天系列 飞行器用的电缆 试验方法 第704部分:柔性 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 704: Flexibility |
EN 3475-705-2002 | 航空航天系列 飞行器用的电缆 试验方法 第705部分:对比测量 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 705: Contrast measurement |
EN 3475-801-2002 | 航空航天系列 飞行器用的电缆 试验方法 第801部分:每单位长度电容 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 801: Capacitance per unit length |
EN 3475-802-2002 | 航空航天系列 飞行器用的电缆 试验方法 第802部分:非平衡电容 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 802: Capacitance unbalance |
EN 3475-803-2002 | 航空航天系列 飞行器用的电缆 试验方法 第803部分:可变电容 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 803: Capacitance variation |
EN 3475-804-2002 | 航空航天系列 飞行器用的电缆 试验方法 第804部分:传播速度 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 804: Velocity of progagation |
EN 3475-805-2002 | 航空航天系列 飞行器用的电缆 试验方法 第805部分:阻抗特征 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 805: Characteristic impedance |
EN 3475-806-2002 | 航空航天系列 飞行器用的电缆 试验方法 第806部分:衰减 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 806: Attenuation |
EN 3475-807-2002 | 航空航天系列 飞行器用的电缆 试验方法 第807部分:传输阻抗 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 807: Transfer impedance / Note: Applies in conjunction with EN 3475-100 (2002-02) |
EN 3475-808-2002 | 航空航天系列 飞行器用的电缆 试验方法 第808部分:串音 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 808: Cross-talk / Note: Applies in conjunction with EN 3475-100 (2002-02) |
EN 3745-205-2002 | 航空航天系列 航空用光缆和光纤 试验方法 第205部分:电缆纵向尺寸的稳定性 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 205: Cable longitudinal dimensional stability |
EN 3745-511-2002 | 航空航天系列 航空用光缆和光纤 试验方法 第511部分:电缆间磨损 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion |
EN 50083-1-1993+A1 -1997+A2-1997 | 电视和声音信号及交互式服务用电缆网络 第1部分:安全要求 | Cable networks for television signals, sound signals and interactive services - Part 1: Safety requirements |
EN 50083-10-2002 | 电视和声音信号及交互式服务用电缆分配系统 第10部分:回程线路系统性能 | Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths |
EN 50083-2-2001 | 电视和声音信号及交互式服务用电缆网络 第2部分:设备的电磁兼容性 | Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
EN 50083-3-2002 | 电视和声音信号及交互式服务用电缆网络 第3部分:共轴电缆网络的活力宽谱带设备 | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for coaxial cable networks |
EN 50083-4-1998 | 电视和声音信号及交互式服务用电缆网络 第4部分:共轴电缆网络的无源宽谱带设备 | Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks |
EN 50083-5-2001 | 电视和声音信号及交互式服务用电缆网络 第5部分:起点设备 | Cabled networks for television signals, sound signals and interactive services - Part 5: Headend equipment |
EN 50083-6-1997 | 电视和声音信号及交互式服务用电缆网络 第6部分:光学设备 | Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
EN 50083-7-1996+A1-2000 | 电视和声音信号及交互式服务用电缆网络 第7部分:系统性能 | Cable networks for television signals, sound signals and interactive services - Part 7: System performance |
EN 50083-8-2002 | 电视和声音信号及交互式服务用电缆网络 第8部分:网络的电磁兼容性 | Cable networks for television signals, sound signals and interactive services - Part 8: Electromagnetic compatibility for networks |
EN 50083-9-2002 | 电视和声音信号及交互式服务用电缆网络 第9部分:DVB/MPEG-2-传输电流用 CATV-/SMATV端点和类似专业设备 | Cable networks for television signals, sound signals and interactive services - Part 9: Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams |
EN 50085-1-1997+A1-1998 | 电气装置用电缆槽和电缆管道系统 第1部分:一般要求 | Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements |
EN 50085-1/prA2-2002 | 电气装置用电缆槽和电缆管道系统 第1部分:一般要求 修改PrA2 | Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements; Amendment A2 |
EN 50085-2-3-1999 | 电气装置用电缆槽和电缆管道系统 第2-3部分:箱式设备用有槽电缆槽系统的特殊要求 | Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets |
EN 50086-1-1993 | 电缆装置用导管系统 第1部分:一般要求 | Conduit systems for cable management - Part 1: General requirements |
EN 50086-2-1-1995 +A11-1998 | 电缆装置用导管系统 第2-1部分:刚性导管系统的特殊要求 | Conduit systems for cable management - Part 2-1: Particular requirements for rigid conduit systems |
EN 50086-2-2-1995 +A11-1998 | 电缆装置用导管系统 第2-2部分:可弯曲导管系统的特殊要求 | Conduit systems for cable management - Part 2-2: Particular requirements for pliable conduit systems |
EN 50086-2-3-1995 +A11-1998 | 电缆装置用导管系统 第2-3部分:柔性导管系统的特殊要求 | Conduit systems for cable management - Part 2-3: Particular requirements for flexible conduit systems |
EN 50086-2-4-1994 +A1-2001 | 电缆装置用导管系统 第2-4部分:地下导管系统的特殊要求 | Conduit systems for cable management - Part 2-4: Particular requirements for conduit systems buried underground |
EN 50098-1-1998+A1-2002 | 信息技术用建筑群中电缆敷设 第1部分:ISDN基本存取 | Customer premises cabling for information technology - Part 1: ISDN basic access |
EN 50098-2-1996 | 建筑群中信息技术用电缆敷设 第2部分:千字节/秒ISDN初级多路传送连接和租用专线网络接口 | Customer premises cabling for information technology - Part 2: 2048 kbit/s ISDN primary access and leased line network interface |
EN 50109-1-1995 | 手动压接工具 低频和射频用电线和电缆压接连接用工具 第1部分:一般要求和试验 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 1: General requirements and tests |
EN 50109-2-1-1995 | 手动压接工具 低频和射频用电线和电缆压接连接用工具 第2-1部分:射频连接器和同轴接触器的手工压接工具 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-1: Particular requirements for radio frequency connectors and concentric contacts - Open throat tools with fixed dies,sies A to E,V and W |
EN 50109-2-2-1995 | 手动压接工具 低频和射频用电线和电缆压接连接用工具 第2-2部分:射频连接器和同轴接触器的手动压接工具 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-2: Particular requirements for radio frequency connectors and concentric contacts - Open throat tools with removadle and inter-changeadle dies,size A to G,Q to T,V and W |
EN 50109-2-3-1995 | 手动压接工具 低频和射频用电线和电缆压接连接用工具 第2-3部分:电器插接连接件触点的特殊要求 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors |
EN 50109-2-4-1995 | 手动压接工具 低频和射频用电线和电缆压接连接用工具 第2-4部分:SMZ系列高频插接连接的中间接点的特殊要 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-4: Particular requirements for centre contacts of RF connectors, series SMZ |
EN 50109-2-5-1995 | 手动压接工具 低频和射频用电线和电缆压接连接用工具 第2-5部分:数据总线用带2个内芯的电缆连接的特殊要 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications |
EN 50117-1-2002 | 同轴电缆 第1部分:通用规范 | Coaxial cables - Part 1: Generic specification / Note: Applies only in conjunction with EN 50290-1-1 |
EN 50117-2-1-2002 | 同轴电缆 第2-1部分:电缆配电网使用的电缆的分规范 5 MHz 至1000 MHz操作系统使用的室内电压降电缆 | Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks; Indoor drop cables for systems operating at 5 MHz - 1000 MHz / Note: Applies only in conjunction with EN 50117-1 |
EN 50117-3-1-2002 | 同轴电缆 第3-1部分:电信设备用电缆的分规范 数字通信系统用小型电缆 | Coaxial cables - Part 3-1: Sectional specifications for cables used in telecom applications; Miniaturized cables used in digital communication systems / Note: Applies only in conjunction with EN 50117-1 |
EN 50117-3-1996 | 电缆配电设备用同轴电缆 第3部分:用户室外引入电缆用分规范 | Coaxial cables used in cabled distribution networks - Part 3: Sectional specification for outdoor drop cables |
EN 50117-4-1996 | 电缆配电设备用同轴电缆 第4部分:配电器和线路电缆用分规范 | Coaxial cables used in cabled distribution networks - Part 4: Sectional specification for distribution and trunk cables |
EN 50117-5-1997 | 电缆配电网络用同轴电缆 第5部分:用在频率在5MHz至2150MHz之间网络操作用室内分接电缆分规范 | Coaxial cables used in cabled distribution networks - Part 5: Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz |
EN 50117-6-1997 | 电缆配电网络用同轴电缆 第6部分:用于频率在5MHz-2150MHz之间网络操作用室外分接电缆分规范 | Coaxial cables used in cabled distribution networks - Part 6: Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz |
EN 50143-1997+A1-2003 | 无荷载额定输出电压大于1KV小于10KV的标志灯和气体放电管装置用电缆 | Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV |
EN 50146-2000 | 电力设备用电缆线 | Cable ties for electrical installations |
EN 50173-1-2002 | 信息技术 普通电缆系统 第1部分:一般要求和办公区 | Information technology - Generic cabling systems - Part 1: General requirements and office areas |
EN 50174-1-2000 | 信息技术 铺设电缆装置 第1部分:规范和质量保证 | Information technology - Cabling installation - Part 1: Specification and quality assurance |
EN 50174-2-2000 | 信息技术 铺设电缆装置 第2部分:建筑物内部设施安装的规划及实践 | Information technology - Cabling installation - Part 2: Installation planning and practices inside buildings |
EN 50182-2001 | 用于过热总线的导体 圆形同轴多股电缆芯线的导体 | Conductors for overhead lines - Round wire concentric lay stranded conductors / Note: Includes Corrigendum of July 2001 |
EN 50200-2000 | 用于紧急线路的非保护型小电缆的耐火性试验方法 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
EN 50214-1997 | 升降机用柔软电缆 | Flexible cables for lifts |
EN 50249-2002 | 地下管道和电缆的定位器 性能与安全 | Electromagnetic locators for buried pipes and cables - Performance and safety |
EN 50262-1998+A1-2001 | 电气设备用米制电缆密封装置 | Metric cable glands for electrical installations |
EN 50264-1-2002 | 铁路应用 具有特殊放火性能的铁路机车车辆电缆 标准外壁 第1部分:基本要求 | Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 1: General requirements |
EN 50264-2-2002 | 铁路应用 具有特殊放火性能的铁路机车车辆电缆 标准外壁 第2部分:单芯电缆 | Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 2: Single core cables |
EN 50264-3-2002 | 铁路应用 具有特殊放火性能的铁路机车车辆电缆 标准外壁 第3部分:多芯电缆 | Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 3: Multicore cables |
EN 50265-1-1998 | 在着火条件下电缆的一般测试方法 单个绝缘导体或电缆耐火焰垂直传播试验 第1部分:装置 | Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 1: Apparatus |
EN 50265-2-1-1998 | 在着火条件下电缆的一般测试方法 单个绝缘导体或电缆耐火焰垂直传播试验 第2-1部分:方法 1kW预混火焰 | Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2: Procedures - 1 kW pre-mixed flame |
EN 50265-2-2-1998 | 在着火条件下电缆的一般测试方法 单个绝缘导体或电缆耐火焰垂直传播试验 第2-2部分:方法 扩散火焰 | Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2: Procedures - Diffusion flame |
EN 50266-1-2001 | 在着火条件下电缆的一般测试方法 分布在垂直安装的胶合线或电缆四周的垂直火焰的试验 第1部分:装置 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-1: Apparatus |
EN 50266-2-1-2001 | 在着火条件下电缆的一般测试方法 分布在垂直安装的胶合线或电缆四周的垂直火焰的试验 第2-1部分:程序 A | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-1: Procedures; Category A F/R / Note: Includes Corrigendum of March 2002 |
EN 50266-2-2-2001 | 在着火条件下电缆的一般测试方法 分布在垂直安装的胶合线或电缆四周的垂直火焰的试验 第2-2部分:程序 A | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-2: Procedures; Category A / Note: Includes Corrigendum of March 2002 |
EN 50266-2-3-2001 | 在着火条件下电缆的一般测试方法 分布在垂直安装的胶合线或电缆四周的垂直火焰的试验 第2-3部分:程序 B | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-3: Procedures - Category B / Note: Includes Corrigendum of March 2002 |
EN 50266-2-4-2001 | 在着火条件下电缆的一般测试方法 分布在垂直安装的胶合线或电缆四周的垂直火焰的试验 第2-4部分:程序 C | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-4: Procedures; Category C / Note: Includes Corrigendum of March 2002 |
EN 50266-2-5-2001 | 在着火条件下电缆的一般测试方法 分布在垂直安装的胶合线或电缆四周的垂直火焰的试验 第2-5部分:程序 D | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-5: Procedures; Small cables; Category D / Note: Includes Corrigendum of March 2002 |
EN 50267-1-1998 | 在着火条件下电缆的一般测试方法 电缆材料燃烧过程中放出气体的试验 第1部分:装置 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus |
EN 50267-2-1-1998 | 在着火条件下电缆的一般测试方法 电缆材料燃烧过程中放出气体的试验 第2-1部分:程序 氢卤酸气体量的测 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-1: Procedures - Determination of the amount of halogen acid gas |
EN 50267-2-2-1998 | 在着火条件下电缆的一般测试方法 电缆材料燃烧过程中放出气体的试验 第2-2部分:程序 通过测量 pH 值和 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity |
EN 50267-2-3-1998 | 在着火条件下电缆的一般测试方法 电缆材料燃烧过程中放出气体的试验 第2-3部分:程序 通过测量 pH 值和 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-3: Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity Partly Supersedes HD602S1:1992 |
EN 50268-1-1999 | 在燃烧条件下电缆的一般试验方法 在规定条件下电缆燃烧烟密度测量 第1部分:仪器 | Common test methods for cable under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 1: Apparatus |
EN 50268-2-1999 | 在燃烧条件下电缆的一般试验方法 在规定条件下电缆燃烧烟密度测量 第2部分:程序 | Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 2: Procedure |
EN 50288-1-2001 | 模拟和数字通信和管理中使用的多元金属电缆 第1部分:通用规范 | Multi-element metallic cables use in analogue and digital communication and control - Part 1: Generic specification |
EN 50288-2-1-2001 | 模拟和数字通信和管理中使用的多元金属电缆 第2-1部分:表征100 MHz以上的屏蔽电缆的部分规范 水平及建筑 | Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterized up to 100 MHz; Horizontal and building backbone cables |
EN 50288-2-2-2001 | 电缆和数字通信和管理中用的多芯金属电缆 第2-2部分:特征频率达100 MHz屏蔽电缆的部分规范 工作区和中继 | Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterized up to 100 MHz; Work area and patch cord cables |
EN 50288-3-1-2001 | 模拟和数字通信和管理中使用的多元金属电缆 第3-1部分:表征100 MHz以上的未屏蔽电缆的部分规范 水平及建 | Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterized up to 100 MHz; Horizontal and building backbone cables |
EN 50288-3-2-2001 | 模拟和数字通信和管理中使用的多元金属电缆 第3-2部分:表征100 MHz以上的未屏蔽电缆的部分规范 工作区和 | Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterized up to 100 MHz; Work area and patch cord cables |
EN 50288-4-1-2001 | 模拟和数字通信和管理中使用的多元金属电缆 第4-1部分:表征600 MHz以上的屏蔽电缆的部分规范 水平及建筑 | Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterized up to 600 MHz; Horizontal and building backbone cables |
EN 50288-4-2-2001 | 模拟和数字通信和管理中使用的多元金属电缆 第4-2部分:表征600 MHz以上的屏蔽电缆的部分规范 工作区和局 | Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterized up to 600 MHz; Work area and patch cord cables |
EN 50289-1-1-2001 | 通信电缆 试验方法规范 第1-1部分:电气试验方法 基本要求 | Communication cables - Specifications for test methods - Part 1-1: Electrical test methods; General requirements |
EN 50289-1-10-2001 | 通信电缆 试验方法规范 第1-10部分:电气试验方法 串音 | Communication cables - Specifications for test methods - Part 1-10: Electrical test methods; Crosstalk / Note: Applies only in conjunction with EN 50289-1-1 |
EN 50289-1-11-2001 | 通信电缆 试验方法规范 第1-11部分:电气试验方法 特征阻抗 输入阻抗 回波损耗 | Communication cables - Specifications for test methods - Part 1-11: Electrical test methods; Characteristic impedance, input impedance, return loss / Note: Applies only in conjunction with EN 50289-1-1 |
EN 50289-1-2-2001 | 通信电缆 试验方法规范 第1-2部分:电气试验方法 DC电阻 | Communication cables - Specifications for test methods - Part 1-2: Electrical test methods; DC resistance |
EN 50289-1-3-2001 | 通信电缆 试验方法规范 第1-3部分:电气试验方法 绝缘强度 | Communication cables - Specifications for test methods - Part 1-3: Electrical test methods; Dielectric strength |
EN 50289-1-4-2001 | 通信电缆 试验方法规范 第1-4部分:电气试验方法 绝缘电阻 | Communication cables - Specifications for test methods - Part 1-4: Electrical test methods; Insulation resistance / Note: Applies in conjunction with EN 50289-1-1 |
EN 50289-1-5-2001 | 通信电缆 试验方法规范 第1-5部分:电气试验方法 电容 | Communication cables - Specifications for test methods - Part 1-5: Electrical test methods; Capacitance / Note: Applies in conjunction with EN 50289-1-1 |
EN 50289-1-6-2002 | 通信电缆 试验方法规范 第1-6部分:电气试验方法 电磁性能 | Communication cables - Specifications for test methods - Part 1-6: Electrical test methods; Electromagnetic performance / Note: Applies in conjunction with EN 50289-1-1 |
EN 50289-1-7-2001 | 通信电缆 试验方法规范 第1-7部分:电气试验方法 传播速度 | Communication cables - Specifications for test methods - Part 1-7: Electrical test methods; Velocity of propagation / Note: Applies in conjunction with EN 50289-1-1 |
EN 50289-1-8-2001 | 通信电缆 试验方法规范 第1-8部分:电气试验方法 衰减 | Communication cables - Specifications for test methods - Part 1-8: Electrical test methods - Attenuation / Note: Applies in conjunction with EN 50289-1-1 |
EN 50289-1-9-2001 | 通信电缆 试验方法规范 第1-9部分:电气试验方法 衰减不平衡(纵向转换损失、纵向转换传递损失) | Communications cables - Specifications for test methods - Part 1-9: Electrical test methods; Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss) |
EN 50289-3-1-2001 | 通信电缆 试验方法规范 第3-1部分:机械试验方法 基本要求 | Communication cables - Specifications for test methods - Part 3-1: Mechanical test methods; General requirements |
EN 50289-3-11-2001 | 通信电缆 试验方法规范 第3-11部分:机械试验方法 电缆耐切断性 | Communication cables - Specifications for test methods - Part 3-11: Mechanical test methods; Cable cut-through resistance |
EN 50289-3-12-2001 | 通信电缆 试验方法规范 第3-12部分:机械试验方法 强迫性损伤 | Communication cables - Specifications for test methods - Part 3-12: Mechnical test methods; Shot gun damage |
EN 50289-3-13-2003 | 通信电缆 试验方法的规范 第3-13部分:机械试验方法 风蚀振动 | Communication cables - Specifications for test methods - Part 3-13: Mechanical test methods; Aeolian vibration / Note: Applies in conjunction with EN 50289-3-1 |
EN 50289-3-15-2003 | 通信电缆 试验方法规范 第3-15部分:机械试验方法 水下电缆耐液压/注意:和EN 50289-3-1联合使用 | Communication cables - Specifications for test methods - Part 3-15: Mechanical test methods; Underwater cable resistance to hydrostatic pressure / Note: Applies in conjunction with EN 50289-3-1 |
EN 50289-3-16-2001 | 通信电缆 试验方法规范 第3-16部分:机械试验方法 电缆拉力性能 | Communication cables - Specifications for test methods - Part 3-16: Mechanical test methods; Cable tensile performance |
EN 50289-3-17-2002 | 通信电缆 试验方法规范 第3-17部分:机械试验方法 绝缘材料和包皮的粘合力 | Communication cables - Specifications for test methods - Part 3-17: Mechnical test methods; Adhesion of dielectric and sheath / Note: Applies in conjunction with EN 50289-3-1 |
EN 50289-3-2-2001 | 通信电缆 试验方法规范 第3-2部分:机械试验方法 导体的抗拉强度和延展性 | Communication cables - Specifications for test methods - Part 3-2: Mechanical test methods; Tensile strength and elongation for conductor |
EN 50289-3-4-2001 | 通信电缆 试验方法规范 第3-4部分:机械试验方法 绝缘体和包层的抗拉强度 延展性和收缩性 | Communication cables - Specifications for test methods - Part 3-4: Mechanical test methods; Tensile strength, elongation and shrinkage of insulation and sheath |
EN 50289-3-5-2001 | 通信电缆 试验方法规范 第3-5部分:机械试验方法 电缆的抗挤压性 | Communication cables - Specifications for test methods - Part 3-5: Mechanical test methods; Crush resistance of the cable |
EN 50289-3-6-2001 | 通信电缆 试验方法规范 第3-6部分:机械试验方法 电缆的抗冲击性 | Communication cables - Specifications for test methods - Part 3-6: Mechanical test methods; Impact resistance of the cable |
EN 50289-3-7-2001 | 通信电缆 试验方法规范 第3-7部分:机械试验方法 电缆包皮的耐腐蚀性 | Communication cables - Specifications for test methods - Part 3-7: Mechanical test methods; Abrasion resistance of the cable sheath |
EN 50289-3-8-2001 | 通信电缆 试验方法规范 第3-8部分:机械试验方法 电缆包皮标志的耐腐蚀性 | Communication cables - Specifications for test methods - Part 3-8: Mechanical test methods; Abrasion resistance of cable sheath markings |
EN 50289-3-9-2001 | 通信电缆 试验方法规范 第3-9部分:机械试验方法 弯曲试验 | Communication cables - Specifications for test methods - Part 3-9: Mechanical test methods; Bending tests |
EN 50289-4-1-2001 | 通信电缆 试验方法规范 第4-1部分:环境试验方法 基本要求 | Communication cables - Specifications for test methods - Part 4-1: Environmental test methods; General requirements |
EN 50289-4-11-2002 | 通信电缆 试验方法规范 第4-11部分:环境试验方法 汇集在水平方向上的耐火试验 | Communication cables - Specifications for test methods - Part 4-11: Environmental test methods; A horizontal integrated fire test method |
EN 50289-4-14-2003 | 通信电缆 试验方法的规范 第3-14部分:环境试验方法 闪电 | Communication cables - Specifications for test methods - Part 4-14: Environmental test methods; Lightning / Note: Applies in conjunction with EN 50289-3-1 |
EN 50289-4-2-2001 | 通信电缆 试验方法规范 第4-2部分:环境试验方法 浸水 | Communication cables - Specifications for test methods - Part 4-2: Environmental test methods; Water penetration |
EN 50289-4-6-2001 | 通信电缆 试验方法规范 第4-6部分:环境试验方法 温度的周期性变化 | Communication cables - Specifications for test methods - Part 4-6: Environmental test methods; Temperature cycling |
EN 50289-4-9-2001 | 通信电缆 试验方法规范 第4-9部分:环境试验方法 耐气压试验 | Communication cables - Specifications for test methods - Part 4-9: Environmental test methods; Pneumatic resistance |
EN 50290-2-20-2001 | 通信电缆 第2-20部分:通用的设计原理及结构 总则 | Communication cables - Part 2-20: Common design rules and construction; General |
EN 50290-2-21-2001 | 通信电缆 第2-21部分:通用的设计原理及结构 PVC绝缘化合物 | Communication cables - Part 2-21: Common design rules and construction; PVC insulation compounds |
EN 50290-2-22-2001 | 通信电缆 第2-22部分:通用的设计原则及结构 PVC包皮化合物 | Communication cables - Part 2-22: Common design rules and construction; PVC sheating compounds |
EN 50290-2-23-2001 | 通信电缆 第2-23部分:通用的设计原理及结构 PE绝缘体 | Communication cables - Part 2-23: Common design rules and construction; PE insulation |
EN 50290-2-24-2002 | 通信电缆 第2-24部分:通用的设计原理及结构 PE包皮 | Communication cables - Part 2-24: Common design rules and construction; PE sheathing / Note: Applies only in conjunction with EN 50290-2-20 |
EN 50290-2-25-2002 | 通信电缆 第2-25部分:通用的设计原理及结构 聚丙烯绝缘化合物 | Communication cables - Part 2-25: Common design rules and construction; Polypropylene insulation compounds / Note: Applies only in conjunction with EN 50290-2-20 |
EN 50290-2-26-2002 | 通信电缆 第2-26部分:通用的设计原理及结构 无卤阻燃热塑化合物 | Communication cables - Part 2-26: Common design rules and construction; Halogen free flame retardant insulation compounds / Note: Applies only in conjunction with EN 50290-2-20 |
EN 50290-2-27-2002 | 通信电缆 第2-27部分:通用的设计原理及结构 无卤阻燃热塑包复物 | Communication cables - Part 2-27: Common design rules and construction; Halogen free flame retardant thermoplastic sheathing compounds / Note: Applies only in conjunction with EN 50290-2-20 |
EN 50290-2-28-2002 | 通信电缆 第2-28部分:通用的设计原理及结构 满充电缆的填充复合物 | Communication cables - Part 2-28: Common design rules and construction; Filling compounds for filled cables / Note: Applies only in conjunction with EN 50290-2-20 |
EN 50290-2-29-2002 | 通信电缆 第2-29部分:通用的设计原理及结构 交联PE绝缘复合物 | Communication cables - Part 2-29: Common design rules and construction; Cross-linked PE insulation compounds / Note: Applies only in conjunction with EN 50290-2-20 |
EN 50290-2-30-2002 | 通信电缆 第2-30部分:通用的设计原理及结构 聚(四氟乙烯-六氟烯)(FEP)绝缘及包复物 | Communication cables - Part 2-30: Common design rules and construction; Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing / Note: Applies only in conjunction with EN 50290-2-20 |
EN 50290-4-1-2001 | 通信电缆 第4-1部分:电缆用途总则:环境条件及安全问题 | Communication cables - Part 4-1: General considerations for the use of cables; Environmental conditions and safety aspects |
EN 50299-2002 | 最高电压为72.5kV至550KV设备的变压器和电抗器用油浸电缆连接组件 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment U<(Index)m> from 72,5 kV to 550 kV |
EN 50305-2002 | 铁路应用 有特殊防火性能的铁路机车车辆电缆 试验方法 | Railway applications - Railway rolling stock cables having special fire performance - Test methods |
EN 50306-1-2002 | 铁路设施 有专门防火性能的铁路车辆电缆 薄壁 第1部分:一般要求 | Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 1: General requirements |
EN 50306-2-2002 | 铁路设施 有专门防火性能的铁路车辆电缆 薄壁 第2部分:单芯电缆 | Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 2: Single core cables |
EN 50306-3-2002 | 铁路设施 有专门防火性能的铁路车辆电缆 薄壁 第3部分:单芯和多芯电缆(二芯、三芯和四芯)的屏障及薄 | Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 3: Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed |
EN 50306-4-2002 | 铁路设施 有专门防火性能的铁路车辆电缆 薄壁 第4部分:多芯和多对电缆的标准壁护套 | Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 4: Multicore and multipair cables standard wall sheathed |
EN 50307-2002 | 铅与铅合金 电缆的铅与铅合金包皮和电缆套 | Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables |
EN 50334-2001 | 识别芯线的电缆的注册标记 | Marking by inscription for the identification of cores of electric cables |
EN 50336-2002 | 不大于36kV的变压器和电抗器电缆箱的套筒 | Bushings for transformers and reactor cable boxes not exceeding 36 kV |
EN 50340-2001 | 液压电缆切割器 在额定电压高达AC 30 kV的电气设施上使用的装置 | Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV / Note: Includes Corrigendum of February 2002 |
EN 50343-2003 | 铁路设备 机车车辆 安装电缆规则 | Railway applications - Rolling stock - Rules for installation of cabling |
EN 50355-2003 | 铁路设备 具有特殊防火性能的铁路机车车辆电缆 薄内壁和标准内壁 使用指南 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall and standard wall; Guide to use |
EN 50356-2002 | 电缆的火花试验方法 | Method for spark testing of cables |
EN 50362-2003 | 应急电路中使用的较大未保护电源和控制电缆的防火试验方法 | Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits |
EN 50368-2003 | 电气装置用电缆夹具 | Cable cleats for electrical installations |
EN 60169-23-1993 | 射频连接器 第23部分:与3.5mm刚性精密同轴电缆配用外导体内径3.5mm(0.1378in)的插针插孔式射频连接器 | Radio-frequency connectors- part 23: Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in) (IEC 60169-23:1991) |
EN 60169-24-1993 | 射频连接器 第24部分:典型用于75Ω电缆分配系统、螺纹连接射频同轴连接器(F型) | Radio-frequency connectors- part 24: Radio-frequency coaxial connectors with screw coupling, typically for use in 75Ω cable distribution systems (type F) (IEC 60169-24:1991) |
EN 60169-25-1993 | 射频连接器 第25部分:与双芯屏蔽对称电缆配用、外导体内径为13.56mm(0.534in)的双极螺纹连接连接器(TWHN | Radio-frequency connectors; part 25: two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (type TWHN) (IEC 60169-25:1992) |
EN 60230-2002 | 电缆极其附件的冲击电压试验 | Impulse tests on cables and their accessories (IEC 60230:1966) |
EN 60371-3-8-1995 | 以云母为基材的绝缘材料 第3部分:单项材料规范 活页8:耐燃烧安全电缆用云母纸带 | Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables (IEC 60371-3-8:1995 + Corrigendum 1995) |
EN 60439-5-1996+A1-1998 | 低压开关设备和控制设备组合装置 第5部分:公共场所户外安装用组合装置(CDCs)的特殊要求 用于电网中配 | Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks (IEC 60439-5:1996) |
EN 60465-1990 | 充油电缆用的未使用过的绝缘矿物油规范 | Specification for unused insulating mineral oils for cables with oil ducts (IEC 60465:1988) |
EN 60603-9-1998 | 印制板用频率低于3MHz的连接器 第9部分:2.54mm(0.1in)基本网格印制电路板、底板和电缆连接器用两对端连 | Connectors for frequencies below 3 MHz for use with printed boards - Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) (IEC 60603-9:1990) |
EN 60702-1-2002 | 额定电压750V及以下矿物绝缘电缆 第1部分:电缆 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables (IEC 60702-1:2002) |
EN 60702-2-2002 | 额定电压750V及以下矿物绝缘电缆 第2部分:终端 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations (IEC 60702-2:2002) |
EN 60719-1993 | 额定电压达450/750V及以下圆形铜导线电缆的平均外形尺寸上下限的计算 | Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V (IEC 60719:1992) |
EN 60794-1-1-2002 | 光学纤维电缆 第1-1部分:总规范 总则 | Optical fibre cables - Part 1-1: Generic specification; General (IEC 60794-1-1:2001) |
EN 60794-1-2-1999 +A-2002 | 光学纤维电缆 第1-2部分:总规范 光缆基本试验程序 | Optical fibre cables - Part 1-2: General specification - Basic optical cable test procedures (IEC 60794-1-2:1999) |
EN 60794-1-2/prA2-2002 | 光学纤维电缆 第1-2部分:总规范 光缆基本试验程序 修改草案2 | Optical fibre cables - Part 1-2: Generic specification; Basic optical cable test procedures |
EN 60794-2-10-2003 | 光纤电缆 第2-10部分:室内电缆 单电缆和双电缆的族规范 | Optical fibre cables - Part 2-10: Indoor cables; Family specification for simplex and duplex cables (IEC 60794-2-10:2003) / Note: Endorsement notice |
EN 60794-2-20-2003 | 光纤电缆 第2-20部分:室内电缆 多光纤配电电缆的族规范 | Optical fibre cables - Part 2-20: Indoor cables; Family specification for multi-fibre optical distribution cables (IEC 60794-2-20:2003) / Note: Endorsement notice |
EN 60794-2-2003 | 光纤电缆 第2部分:室内电缆 分规范 | Optical fibre cables - Part 2: Indoor cables; Sectional specification (IEC 60794-2:2002) / Note: Endorsement notice. Applies only in conjunction with EN 60794-1-1 (2002) and EN 60794-1-2 (1999) |
EN 60794-2-30-2003 | 光纤电缆 第2-30部分:室内电缆 光纤带状电缆的族规范 | Optical fibre cables - Part 2-30: Indoor cables; Family specification for optical fibre ribbon cables (IEC 60794-2-30:2003) / Note: Endorsement notice |
EN 60794-3-10-2002 | 光纤电缆 第3-10部分:室外电缆 管道和直接填埋的通讯光缆的族规范 | Optical fibre cables - Part 3-10: Outdoor cables; Family specification for duct and directly buried optical telecommunication cables (IEC 60794-3-10:2002, modified) / Note: Endorsement notice |
EN 60794-3-20-2002 | 光学纤维电缆 第3-20部分:室外电缆 自立式架空通讯光缆的族规范 | Optical fibre cables - Part 3-20: Outdoor cables; Family specification for optical self-supporting aerial telecommunication cables (IEC 60794-3-20:2002, modified) / Note: Endorsement notice |
EN 60794-3-2002 | 光学纤维电缆 第3部分:分规范 户外电缆 | Optical fibre cables - Part 3: Sectional specification; Outdoor cables (IEC 60794-3:2001) |
EN 60794-3-30-2003 | 光纤电缆 第3-30部分:室外电缆 穿越湖、江的通讯光缆的族规范 | Optical fibre cables - Part 3-30: Outdoor cables; Family specification for optical telecommunication cables for lake and river crossings (IEC 60794-3-30:2002) / Note: Endorsement notice. Applies only in conjunction with EN 60794-1-1 (2002), EN 60794-1-2 |
EN 60811-1-1-1995+A1-2001 | 电缆绝缘和护套材料 通用试验方法 第1部分:一般应用方法 第1节:厚度和总尺寸的测量 机械性能测定试验 | Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties (IEC 60811-1-1:1993) |
EN 60811-1-2-1995 +A2-2000 | 电缆绝缘和护套材料 通用试验方法 第1部分:一般应用方法 第2节:热老化方法 | Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application; section 2: Thermal ageing methods (IEC 60811-1-2:1985 + corrigendum 1986 + A1:1989) |
EN 60811-1-3-1995 +A1-2001 | 电缆绝缘和护套材料通用试验方法 第1部分:一般应用方法 第3节:密度测定方法 吸水试验 收缩试验 | Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application; section 3: Methods for determining the density - Water absorption tests - Shrinkage test (IEC 60811-1-3:1993) |
EN 60811-1-4-1995 +A2-2001 | 电缆绝缘和护套材料 通用试验方法:第1部分:一般应用方法 第4节:低温试验 | Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application; section 4: Test at low temperature (IEC 60811-1-4:1985 + corrigendum 1986 + A1:1993) |
EN 60811-2-1-1998 +A1-2001 | 电缆绝缘和护套材料 通用试验方法 第2-1部分:合成橡胶专用方法 抗臭氧试验 热固试验和矿物油浸试验 | Insulating and sheathing materials of electric and optical cables - Common test methods - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests (IEC 60811-2-1:1998) |
EN 60811-3-1-1995 +A1-1996+A2-2001 | 电缆的绝缘和护套材料 通用试验方法 第3部分:.聚氯乙烯(PVC)化合物专用方法 第1节:高温下压力试验 耐 | Insulating and sheathing materials of electric cables - Common test methods - Part 3: Methods specific to PVC compounds - Section 1: Pressure test at high temperature - Tests for resistance to cracking (IEC 60811-3-1:1985 + Corrigendum 1986) |
EN 60811-3-2-1995 | 电缆绝缘和护套材料 通用试验方法 第3部分:聚氯乙烯复合物专用方法 第2节:质量损失试验 热稳定性试验 | Insulating and sheathing materials of electric cables - Common test methods - Part 3: Methods specific to PVC compounds - Section 2: Loss of mass test - Thermal stability test (IEC 60811-3-2:1985 + Corrigendum 1986 + A1:1993) |
EN 60811-4-1-1995 | 电缆绝缘护套材料 通用试验方法 第4部分:聚乙烯和聚丙烯化合物专用方法 第1节:耐环境应力破裂性 在空 | Insulating and sheathing materials of electric cables - Common test methods - Part 4: Methods specific to polyethylene and polypropylene compounds - Section 1: Resistance to environmental stress cracking - Wrapping test after thermal ageing in air - Meas |
EN 60811-4-2-1999 | 电缆绝缘和护套材料 通用试验方法 第4部分:聚乙烯和聚丙烯化合物专用方法 第2节:预处理后抗拉强度和断 | Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Part 4: Methods specific to polyethylene and polypropylene compounds - Section 2: Tensile strength and elongation at break after pre-conditioning-Wrapping text often thermal ageing in air-Measurement of mass increase-Long-term stablity text-Text method for Copper-cotalyed oxidation |
EN 60811-5-1-1999 | 电缆绝缘和护套材料通用试验方法 第5部分:填充复合物的专用方法 第1节:滴点 油分离 较低温脆性 总酸 | Insulating and sheathing materials of electric cables and optical fibre cables - Common test methods - Part 5: Methods specific to filling compounds - Section 1: Drop point; separation of oil - lower temperature brittleness; total acid number; absence of |
EN 60874-17-1997 | 光纤和电缆的接头 第17部分:纤维光学接头的部分规范 F-05型(磨擦锁定) | Connectors for optical fibres and cables - Part 17: Sectional specification for fibre optic connector - Type F-05 (friction lock) (IEC 60874-17:1995 + Corrigendum 1996) |
EN 60885-2-2003 | 电缆的电气试验方法 第2部分:局部放电试验 | Electrical test methods for electric cables - Part 2: Partial discharge tests (IEC 60885-2:1987) / Note: Endorsement notice |
EN 60885-3-2003 | 电缆的电气试验方法 第3部分:局部放电试验 挤压电力电缆段局部放电测量的试验方法 | Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables (IEC 60885-3:1988) / Note: Endorsement notice |
EN 60966-1-1999 | 射频与同轴电缆组件 第1部分:总规范 一般要求和试验方法 | Radio frequency and coaxial cables assemblies - Part 1: Generic specification - General requirements and test methods (IEC 60966-1:1999) |
EN 60966-2-1-1995+A1-1997 | 射频和同轴电缆组件 第2-1部分:柔软同轴电缆组件分规范 | Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies (IEC 60966-2-1:1991) |
EN 60966-2-2-1994 | 射频和同轴电缆组件 第2-2部分:柔软性同轴电缆组件空白详细规范 | Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies (IEC 60966-2-2:1992) |
EN 60966-2-3-1999 | 射频和同轴电缆部件 第2-3部分:柔软同轴电缆部件的详细规范 | Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxial cable assemblies (IEC 60966-2-3:1996) |
EN 60966-2-4-2003 | 射频与同轴电缆组件 第2-4部分:无线电和电视接收机用电缆部件详细规范(频率范围0至3000MHz的IEC60169-2 | Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification cable assemblies for radio and TV receivers; Frequency range 0 to 3000 MHz, IEC 60169-2 connectors (IEC 60966-2-4:2003) / Note: Endorsement notice |
EN 60966-2-5-2003 | 射频和同轴电缆组件 第2-5部分:无线电和电视接收机用电缆组件的详细规格 频率范围在0至1000 MHz | Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 1000 MHz, IEC 60169-2 connectors (IEC 60966-2-5:2003) / Note: Endorsement notice |
EN 60966-2-6-2003 | 射频和同轴电缆组件 第2-6部分:电视和无线电接收机用电缆组件的详细规格 频率范围在0至3000 MHz,IEC 601 | Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 3000 MHz, IEC 60169-24 connectors (IEC 60966-2-6:2003) / Note: Endorsement notice |
EN 60966-3-1-1994 | 射频和同轴电缆组件 第3-1部分:半柔软同轴电缆组件空白详细规范 | Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies (IEC 60966-3-1:1992) |
EN 60966-3-1994 | 射频和同轴电缆组件 第3部分:半柔软同轴电缆组件分规范 | Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies (IEC 60966-3:1992) |
EN 60966-3-2-1999 | 射频和同轴电缆部件 第3-1部分:.GSM(0.8GHz-1GHz)用半柔软同轴电缆部件的详细规范 | Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz) (IEC 60966-3-2:1996) |
EN 60966-4-1-1994 | 射频和同轴电缆部件 第4-1部分:半硬性同轴电缆组件空白详细规范 | Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies (IEC 60966-4-1:1994) |
EN 60966-4-1994 | 射频和同轴电缆部件 第4部分:半硬性同轴电缆组件分规范 | Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies (IEC 60966-4:1992) |
EN 60974-12-1995 | 弧焊设备 第12部分:焊接电缆的连接器 | Arcwelding equipment - Part 12: Coupling devices for welding cables (IEC 60974-12:1992, modified) |
EN 61076-4-110-2002 | 电子设备用连接器 第4-110部分:有质量评定的印制板连接器 包括完全屏蔽和闭锁功能的基本网格为2.0mm闭锁 | Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality; Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function (IEC 61076-4-110:2001) |
EN 61076-7-2000 | 直流低频模拟及数字高速数据应用系统用连接器 第7部分:有质量评定的包括鉴定和能力批准的电缆引出端附件 | Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval; Sectional specification (IEC 61076-7:2000) |
EN 61138-1997 +A11-2003 | 便携式接地和短路设备用电缆 | Cables for portable earthing and short-circuiting equipment (IEC 61138:1994 + A1:1995, modified) |
EN 61169-24-2001 | 射频连接器 第24部分:分规范 带有螺旋联接器、通常用于75Ω电缆分配系统(F型)的射频同轴连接器 | Radio-frequency connectors - Part 24: Sectional specification; Radio frequency coaxial connectors with screw coupling, typically for use in 75Ω cable distribution systems (type F) (IEC 61169-24:2001) |
EN 61196-2-2003 | 射频电缆 规范 第2部分:聚四氟乙烯(PTFE)绝缘半硬射频同轴电缆分规范 | Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation (IEC 61196-2:1995) / Note: Endorsement notice |
EN 61196-3-1998 | 射频电缆 第3部分:局域网用同轴电缆分规范 | Radio frequency cables - Part 3: Sectional specification for coaxial cables for local area networks (IEC 61196-3:1998) |
EN 61196-3-2-1997 | 射频电缆 第3-2部分:水平层布线数字通信用同轴电缆 有效半径为185m、速率10Mb/s及以下的局域网用实心介 | Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-2:1997) |
EN 61196-3-3-1997 | 射频电缆 第3-3部分:水平层布线数字通信用同轴电缆 有效半径为185m、速率10Mb/s及以下的局域网用泡沫介 | Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-3:1997) |
EN 61238-1-2003 | 额定电压达 30 kV 的电力电缆的压缩和机械连接器 第1部分:试验方法和要求 | Compression and mechanical connectors for power cables for rated voltages up to 36 kV (U<(Index)m> = 42 kV) - Part 1: Test methods and requirements (IEC 61238-1:2003, modified) / Note: Endorsement notice |
EN 61300-2-35-1997 | 光纤互连器件和无源元件 基本试验和测量程序 第2-35部分:试验 电缆章动 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-35: Tests-Cable nutation (IEC 61300-2-35:1995) |
EN 61300-2-4-1997 | 光纤互连器件和无源元件 基本试验和测量程序 第2-4部分:试验 纤维/电缆保持力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention (IEC 61300-2-4:1995) |
EN 61313-1-1997 | 光纤无源器件和电缆组件 第1部分:能力批准 通用规范 | Fibre optic passive components and cable assemblies - Part 1: Capability approval - Generic specification (IEC 61313-1:1995) |
EN 61316-1999 | 工业电缆卷筒 | Industrial cable reels (IEC 61316:1999) |
EN 61515-1996 | 矿物绝缘热电偶电缆和热电偶 | Mineral insulated thermocouple cables and thermocouples (IEC 61515:1995) |
EN 61537-2001 | 电缆管理用电缆托架系统和电缆梯系统 | Cable tray systems and cable ladder systems for cable management (IEC 61537:2001) |
EN 61726-2000 | 电缆组件、电缆、连接器和无源微波元件 混响室法测量屏蔽衰减 | Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method (IEC 61726:1999) |
EN 61935-1-2000 +A1-2002 | 通用布线系统 根据ISO/IEC 11801对对称通信布线进行检验的规范 第1部分:电缆敷设 | Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 1: Installed cabling (IEC 61935-1:2000) |
EN 61935-2-2003 | 通用布线系统 根据EN 50173对对称通信布线进行检验的规范 第2部分:中继电缆和施工场所软线 | Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173 - Part 2: Patch cords and work area cords (IEC 61935-2:2003) / Note: Endorsement notice. Includes Corrigendum of September 2003 |
EN 62012-1-2002 | 恶劣环境下使用的数字通信用多芯和对称双芯/四芯电缆 第1部分:通用规范 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification (IEC 62012-1:2002) / Note: Endorsement notice |
EN 62037-1999 | 射频连接器、连接器电缆组件和电缆 互调电平测量 | RF connectors, connector cable assemblies and cables - Intermodulation level measurement (IEC 62037:1999) |
EN ISO 10807-1996 | 管道工程 在爆燃性空气中电缆保护用皱纹软金属管组件 | Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere (ISO 10807:1994) |
EN ISO 5828-2001 | 电阻焊设备 连接水冷接头的二次连接电缆 尺寸及特性 | Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics (ISO 5828:2001) |
EN ISO 6551-1995 | 石油液体和气体 动态测量的精度和可靠性 电脉冲数据和/或电子脉冲数据的电缆传输 | Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data (ISO 6551:1982) |
EN ISO 8205-1-2002 | 电阻焊接水冷次级线圈连接电缆 第1部分:双导体连接电缆的尺寸和要求 | Water-cooled secondary connection cables for resistance welding - Part 1: Dimensions and requirements for double-conductor connection cables (ISO 8205-1:2002) |
EN ISO 8205-2-2002 | 电阻焊接水冷次级线圈连接电缆 第2部分:单根导线连接电缆的尺寸和要求 | Water-cooled secondary connection cables for resistance welding - Part 2: Dimensions and requirements for single-conductor connection cables (ISO 8205-2:2002) |
EN ISO 8205-3-1996 | 电阻焊接水冷次级线圈连接电缆 第3部分:试验要求 | Water-cooled secondary connection cables for resistance welding - Part 3: Test requirements (ISO 8205-3:1993) |
ENV 50213-1998 | 机场照明用的金属屏蔽电缆 | Metallic screened cables for airfield lighting |
HD 120 S1-1977 | 特性阻抗和射频同轴电缆的尺寸 | Characteristic impedances and dimensions of radio-frequency coaxial cables |
HD 134.5 S1-1977 | 射频连接器 第5部分:96号IEC 60050-17电缆和更大号电缆用射频同轴连接器 | Radio-frequency connectors-part 5: R.F. coaxial connectors for cables 96 IEC 60050-17 and larger |
HD 134.6 S1-1977 | 射频连接器 第6部分:96号IEC 60075-17电缆和更大号电缆用射频同轴连接器 | Radio-frequency connectors; part 6: R.F. coaxial connectors for cables 96 IEC 60075-17 and larger |
HD 21.1 S4-2002 | 额定电压为450/750V及以下的热塑性塑料绝的电缆 第1部分:一般要求 | Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation - Part 1: General requirements |
HD 21.10 S2-2001 | 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第10部分:可延长导线 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 10: Extensible leads |
HD 21.11 S1-1995+A1-2001 | 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第11部分:光源电缆 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 11: Cables for luminaires |
HD 21.12 S1-1994 +A1-2001 | 额定电压450/750V的聚氯乙烯绝缘电缆 第12部分:耐热软电缆(软线) | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 12: Heat-resistant flexible cables (cords) |
HD 21.13 S1-1995 +A1-2001 | 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第13部分:带2个或更多导体的耐油聚氯乙烯铠装电缆 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Part 13: Oil resistant PVC sheated cables with two or more conductors |
HD 21.14 S1-2003 | 额定电压450/750V及以下的热塑性塑料绝的电缆 第14部分:非卤素热塑性塑料化合物的绝缘和包覆的软电缆(软 | Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation - Part 14: Flexible cables (cords), insulated and sheathed with halogen-free thermoplastic compounds |
HD 21.2 S3-1997 | 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第2部分:试验方法 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods |
HD 21.3 S3-1995 +A1-1999 | 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第3部分:固定布线用非铠装电缆 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring (IEC 60227-3:1993, modified) |
HD 21.4 S2-1990 | 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第4部分:固定配线的铠装电缆 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring |
HD 21.5 S3-1994 +A1-1999+A2-2001 | 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第5部分:软电缆(软线) | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V; part 5: flexible cables (cords) (IEC 60227-5:1979, modified) |
HD 21.7 S2-1996+A1-1999 | 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第7部分:温度达90摄氏度的导体内部配线用单芯非铠装电缆 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Single core non-sheathed cables for internal wiring for a conductor temperature of 90℃ |
HD 21.8 S2-1999 | 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第8部分:装饰链用单芯非铠装电缆 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 8: Single core non-sheathed cables for decorative chains |
HD 21.9 S2-1995 +A1-1999 | 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第9部分:低温安装用单芯非铠装电缆 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 9: Single core non-sheated cable for installation at low temperatures |
HD 22.1 S4-2002 | 额定电压450/750V及以下的交联橡胶绝缘电缆 第1部分:一般要求 | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 1: General requirements |
HD 22.10 S1-1994+A1-1999 | 额定电压450/750V及以下的橡胶绝缘电缆 第10部分:EPR绝缘和聚亚安脂铠装软电缆 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 10: EPR insulated and polyurethane sheathed flexible cable |
HD 22.11 S1-1995 +A1-1999 | 额定电压450/750V及以下的橡胶绝缘电缆 第11部分:EVA软线和软电缆 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 11: EVA cords and flexible cables |
HD 22.12 S1-1996 +A1-1999 | 额定电压450/750V及以下的橡胶绝缘电缆 第12部分:耐热EPR软线和软电缆 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 12: Heat resistant EPR cords and flexible cables |
HD 22.13 S1-1996+A1-2000 | 额定电压450/750V及以下的橡胶绝缘电缆 第13部分:烟雾和腐蚀性气体低排放的绝缘和交联聚合物单芯和多芯软 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 13: Single and multicore flexible cables, insulated and sheathed with crosslinked polymer and having low emission of smoke and corrosive gases |
HD 22.14 S2-2002 | 额定电压450/750V及以下的交联橡胶绝缘电缆 第14部分:要求高软度设施用软线 | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 14: Cords for applications requiring high flexibility |
HD 22.15 S1-1999 | 额定电压450/750V及以下的橡胶绝缘电缆 第15部分:绝缘并包覆耐热硅树脂橡胶的多芯电缆 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 15: Multicore cables insulated and sheathed with heat resistant silicone rubber |
HD 22.16 S1-2000 | 额定电压450/750V及以下的橡胶绝缘电缆 第16部分:防水聚氯丁烯或相同的合成橡胶铠装电缆 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 16: Water resistant polychloroprene or equivalent synthetic elastomer sheathed cables |
HD 22.2 S3-1997 | 额定电压450/750V及以下的橡胶绝缘电缆 第2部分:试验方法 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods |
HD 22.3 S3-1995 +A1-1999 | 额定电压450/750V及以下的橡胶绝缘电缆 第3部分:耐热硅树脂橡胶绝缘电缆 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone rubber insulated cables (IEC 60245-3:1980, modified) / Note: To be replaced by prHD 22.3 S4 (2003-05). |
HD 22.4 S3-1995 +A1-1999 | 额定电压450/750V及以下的橡胶绝缘电缆 第4部分:软线和软电缆 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables (IEC 60245-4:1994, modified) / Note: To be replaced by prHD 22.4 S4 (2003-05). |
HD 22.6 S2-1995 +A1-1999 | 额定电压450/750V及以下的橡胶绝缘电缆 第6部分:弧焊电缆 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 6: Arc welding cables / Note: To be amended by HD 22.6 S2/prA2 (2003-05). |
HD 22.7 S2-1995+A1-1999 | 额定电压450/750V及以下的橡胶绝缘电缆 第7部分:温度达110°C的导体内部配线用耐增温电缆 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 7: Cables with increased heat resistance for internal wiring for a conductor temperature of 110℃ / Note: To be amended by HD 22.7 S2/prA2 (2003-05). |
HD 22.8 S2-1994+A1-1999 | 额定电压450/750V及以下的橡胶绝缘电缆 第8部分:装饰链用聚氯丁烯或相同的合成橡胶铠装电缆 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 8: Polychloroprene or equivalent synthetic elastomer sheathed cable for decorative chains / Note: To be amended by HD 22.8 S2/prA2 (2003-05). |
HD 22.9 S2-1995+A1-1999 | 额定电压450/750V及以下的橡胶绝缘电缆 第9部分:烟雾和腐蚀性气体低排放的固定配线用单芯非铠装电缆 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 9: Single core non-sheathed cables for fixed wiring having low emission of smoke and corrosive gases |
HD 27 S1-1974 | 软电缆和软线芯体的颜色 | Colours of the cores of flexible cables and cords |
HD 308 S2-2001 | 电缆芯和软线的识别 | Identification of cores in cables and flexible cords |
HD 359 S2-1990 | 聚氯乙烯护套扁式电梯电缆 | Flat polyvinylchloride sheathed lift cables |
HD 361 S3-1999 | 电缆设备系统 | System for cable designation |
HD 364 S2-1983 | 医疗X光设备用高压电缆插头和插座连接 | High-voltage cable plug and socket connections for medical X-ray equipment |
HD 383 S2-1986+A1 -1989+A2-1993 | 绝缘电缆的导线 环形导线公差极限指南 | Conductors of insulated cables; guide to the dimensional limits of circular conductors |
HD 428.2.1 S1-1994 | 50 Hz、50 至2500 kVA、设备最高电压不超过36 kV 的三相油浸式配电变压器 第2部分:高压和/或低压端带有电 | Three phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high voltage and/or low voltage side - Section 1: General req uirements |
HD 428.2.2 S1-1997 | 50 Hz、50 至2500 kVA、设备最高电压不超过36 kV 的三相油浸式配电变压器 第2部分:高压和/或低压端带有电 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Section 2: Cable boxes |
HD 428.2.3 S1-1998 | 50 Hz、50 至2500 kVA、设备最高电压不超过36 kV 的三相油浸式配电变压器 第2部分:高压和/或低压端带有电 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Section 3: Cable boxes |
HD 446.3 S1-1993 | 热电偶 第3部分:扩展和补偿电缆 公差和识别系统 | Thermocouples; Part 3: Extension and compensating cables; Tolerances and identification system (IEC 60584-3:1989, modified) |
HD 489 S1-1987 | 射频电缆和连接器用六边形和方形压接模型腔、压锥、标准规、外导体压接套和中心接触压接圆筒的推荐性尺寸 | Recommended dimensions for hexagonal and square crimping-die cavities, indentors, gauges, outer conductor crimp sleeves and centre contact crimp barrels for r.f. cables and connectors |
HD 516 S2-1997 +A1-1997 | 低压协调电缆的使用指南 | Guide to use of low voltage harmonized cables |
HD 586.3 S1-2001 | 额定电压不超过750V的矿物绝缘电缆 第3部分:使用指南 | Mineral insulated cables with a rated voltage not exceeding 750 V - Part 3: Guide to use |
HD 603 S1-1994 +A1-1997 | 额定电压0.6/1 kV的配电电缆 | Distribution cables of rated voltage 0,6/1 kV |
HD 604 S1-1994 +A1-1997 | 发电站用具有特殊防火性能的0.6/1kV电力电缆 | 0.6/1 kV power cables with special fire performance for use in power stations |
HD 605 S1-1994+A1-1996 +A2-2001+A3-2002 | 电缆 附加试验方法 | Electrical cables - Additional test methods / Note: To be amended by HD 605 S1/prA4 (2003-08). |
HD 609 S1-1995 | 数字和模拟通信用设备电缆分规范 | Sectional specification for equipment cables to be used for digital and analogue communication |
HD 620 S1-1996 +A1-2001 | 额定电压3.6/6 (7.2) kV 至 20.8/36 (42) kV的挤压绝缘配电电缆 | Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV |
HD 621 S1-1996 +A1-2001 | 中压树脂浸渍纸绝缘配电电缆 | Medium voltage impregnated paper insulated distribution cables |
HD 622 S1-1996 +A1-2000 | 发电站使用的、具有特殊防火性能的、额定电压从3.6/6 (7.2) kV 至 20.8/36 (42) kV并包括20.8/36 (42) kV的 | Power cables having rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV with special fire performance for use in power stations |
HD 623 S1-1996+A1-2001 | 额定电压 0.6/1.0 kV 配电电缆的接头、止动端和室外终端规范 | Specification for joints, stop ends and outdoor terminations for distribution cables of rated voltage 0,6/1,0 kV / Note: To be replaced by prEN 50393 (2003-07). |
HD 626 S1-1996 +A1-1997+A2-2002 | 额定电压0.6/1 (1.2) kV的高架配电电缆 | Overhead distribution cables of rated voltage U<(Index)o>/U(U<(Index)m>): 0,6/1 (1,2) kV |
HD 627 S1-1996 +A1-2000 | 电力电缆 地上和地下安装的多芯和多对电缆 | Power cables - Multicore and multipair cable for installation above and below ground |
HD 628 S1-1996+A1-2001 | 额定电压3.6/6 kV至20.8/36 kV并包括20.8/36 kV的电力电缆附件的试验方法 | Test methods for accessories for power cables with rated voltage from 3,6/6 kV(Um = 7,2 kV) up to and including 20,8/36 kV(Um = 42 kV) |
HD 629.1 S1-1996 +A1-2001 | 额定电压3.6/6 kV至20.8/36 kV的电力电缆用附件的试验要求 第1部分:挤压绝缘电缆 | Test requirements on accessories for use on power cables of rated voltages from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 1: Cables with extruded insulation / Note: To be replaced by prHD 629.1 S2 (2003-10). |
HD 629.2 S1-1997 +A1-2001 | 额定电压3.6/6(7.2) kV至20.8/36(42) kV的电力电缆用附件的试验要求 第2部分:树脂浸渍纸绝缘电缆 | Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 2: Cables with impregnated paper insulation / Note: To be replaced by prHD 629.2 S2 (2003-10). |
HD 631.1 S1-1998 | 材料特性 第1部分:电缆附件中使用的化合物:硫化前和硫化状态下的树脂化合物 | Material characterisation - Part 1: Compounds for use in cable accessories: Resinous compounds before cure and in the cured state |
HD 632 S1-1998 | 额定电压36 kV 至150 kV的挤压绝缘电力电缆及其附件 | Power cables with extruded insulation and their accessories for rated voltages above 36 kV (Um = 42 kV) up to 150 kV (Um = 170 kV) |
HD 633 S1-1997 | 交流电压400 kV及以下的注油(注液)、纸和聚丙烯纸层薄板绝缘、金属护套电缆及附件的试验 | Tests on oil-filled (fluid-filled), paper- and polypropylene paper laminate-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV (Um=420 kV) |
HD 634 S1-1997 | 交流电压275 kV及以下的内部气压电缆及附件的试验 | Tests on internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV (U<(Index)m>=300 kV) |
HD 635 S1-1997 | 交流电压275 kV及以下的外部气压电缆及附件的试验 | Tests on external gas-pressure (gas compression) cables and accessories for alternating voltages up to and including 275 kV (U<(Index)m>=300 kV) |
prEN 14280-2001 | 地下电缆管道的塑料管线系统 未增塑聚氯乙烯 塑料管、管件及管线规范 | Plastics piping systems for buried cable ducting - Unplasticized poly(vinyl chloride) (PVC-U) - Specifications for pipes, fittings and the system |
prEN 14282-2001 | 地下电缆管道的塑料管线系统 聚丙烯 塑料管、管件及管线规范 | Plastics piping systems for buried cable ducting - Polypropylene (PP) - Specifications for pipes, fittings and the system |
prEN 177000-1992 | 通用规范:光纤连接器/电缆组件 能力批准 | Generic specification: optical fibre connector/cable assemblies; capability approval |
prEN 2084-2000 | 航空航天系列 铜和铜合金导体的一般用途的单芯电缆 技术规范 | Aerospace series - Cables, electric, single-core, general purpose, with conductors in copper or copper alloy - Technical specification |
prEN 2234-2001 | 航空航天系列 耐火电缆 技术规则 | Aerospace series - Cable, electrical, fire resistant - Technical specification |
prEN 2235-1999 | 航空航天系列 屏蔽和护套单芯和多芯电缆 | Aerospace series - Single and multicore electric cables, screened and jacketed |
prEN 2266-002-2000 | 航空航天系列 通用电缆 工作温度 55 ℃ 和 200 ℃ 之间 第002部分:总则 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 200℃ - Part 002: General |
prEN 2266-007-2000 | 航空航天系列 通用电缆 工作温度 55 ℃ 和 200 ℃ 之间 第007部分:UV激光可打印的多芯套内电缆 产品 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 200℃ - Part 007: UV laser printable multicore jacketed cable - Product standard |
prEN 2267-002-2000 | 航空航天系列 通用电缆 工作温度 55 ℃ 和 260 ℃ 之间 第002部分:总则 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 260℃ - Part 002: General |
prEN 2267-007-1999 | 航空航天系列 通用电缆 工作温度 55 ℃ 和 200 ℃ 之间 第007部分:007 DMA 系列 单芯喷墨打印和多芯 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 260℃ - Part 007: DMA family, single ink-jet printable and multicore assembly - Product standard |
prEN 2267-008-1999 | 航空航天系列 通用电缆 工作温度 55 ℃ 和 200 ℃ 之间 第008部分:008 DMA 系列 单芯UV激光打印和多 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 260℃ - Part 008: DM family, single UV laser printable and multicore assembly - Product standard |
prEN 2346-002-2001 | 航空航天系列 耐火电缆 工作温度65 ℃ and 260 ℃之间 第00部分:00 总则 | Aerospace series - Cables, electrical, fire-resistant; Operating temperatures between -65℃ and 260℃ - Teil 002: General |
prEN 2346-003-2001 | 航空航天系列 耐火电缆 工作温度65 ℃ and 260 ℃之间 第003部分:单芯 DL系列 总则 | Aerospace series - Cables, electrical, fire-resistant; Operating temperatures between -65℃ and 260℃ - Teil 003: DL family, single core; Product standard |
prEN 2346-004-2001 | 航空航天系列 耐火电缆 工作温度65 ℃ and 260 ℃之间 第004部分:DN 系列 UV单芯激光印刷和多芯组装 | Aerospace series - Cables, electrical, fire-resistant; Operating temperatures between -65℃ and 260℃ - Teil 004: DN family, single UV laser printable and multicore assembly; Light weight; Product standard |
prEN 2591-609-1999 | 航空航天系列 光电连接元件 试验方法 第609部分:光学元件 电缆附件的效能 电缆循环可绕性 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cyclic flexing |
prEN 2713-002-2000 | 航空航天系列 一般用途的单芯和多芯电缆 工作温度在-55℃和200℃之间 第002部分:屏蔽和护套 通用 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 200℃ - Part 002: Screened and jacketed - General |
prEN 2713-011-2000 | 航空航天系列 一般用途的单芯和多芯电缆 工作温度在-55℃和260℃之间 第011部分:屏蔽(螺旋)和护套 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 200℃ - Part 011: Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard |
prEN 2714-002-2000 | 航空航天系列 一般用途的单芯和多芯电缆 工作温度在-55℃和260℃之间 第002部分:屏蔽和护套 通用 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 260℃ - Part 002: Screened and jacketed - General |
prEN 2714-011-1999 | 航空航天系列 一般用途的单芯和多芯电缆 工作温度在-55℃和260℃之间 第011部分:屏蔽(螺旋)和护套 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 260℃ - Part 011: DM family, screened (spiral) and jacketed, UV laser printable - Product standard |
prEN 2714-012-1999 | 航空航天系列 一般用途的单芯和多芯电缆 工作温度在-55℃和260℃之间 第0012部分:屏蔽(编织的)和护 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 260℃ - Part 012: DM family, screened (braided) and jacketed, UV laser printable - Product standard |
prEN 2853-1998 | 航空航天系列 带EN2083导体的电缆的电流额定值 | Aerospace series - Current ratings for electrical cables with conductor EN 2083 |
prEN 3475-203-1999 | 航空航天系列 飞行器用的电缆 试验方法 第203部分:尺寸 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions |
prEN 3475-306-2001 | 航空航天系列 飞行器用的电缆 试验方法 第306部分:导体连续性 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 306: Continuity of conductors |
prEN 3475-411-1999 | 航空航天系列 飞行器用的电缆 试验方法 第411部分:液体阻力 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids |
prEN 3475-414-1999 | 航空航天系列 飞行器用的电缆 试验方法 第414部分:差式扫描热量计(DSC测试) | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test) |
prEN 3475-415-2002 | 航空航天系列 飞行器用的电缆 试验方法 第415部分:温度的迅速变化 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 415: Rapid change of temperature |
prEN 3475-416-2002 | 航空航天系列 飞行器用的电缆 试验方法 第416部分:热老化 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 416: Thermal ageing |
prEN 3475-513-2001 | 航空航天系列 飞行器用的电缆 试验方法 第513部分:变形阻力(与塑料电缆捆接时) | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 513: Deformation resistance (Installation with plastic cable ties) |
prEN 3475-601-2001 | 航空航天系列 飞行器用的电缆 试验方法 第601部分:烟密度 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density |
prEN 3475-602-2001 | 航空航天系列 飞行器用的电缆 试验方法 第602部分:毒性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity |
prEN 3719-1999 | 航空航天系列 电缆用铝和铝合金导体 产品标准 | Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard |
prEN 4434-1999 | 航空航天系列 用于电缆的铜或铜合金轻质导线 产品标准 | Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard |
prEN 45510-2-8-2000 | 电站设备采购指南 第2-8部分:电气设备 动力电缆 | Guide for procurement of power station equipment - Electrical equipment - Part 2-8: Power cables |
prEN 45541-1995 | 采购指南 电气设备 电缆网 | Guide for procurement - Electrical equipment - Cabling systems |
prEN 45542-1995 | 采购指南 电气设备 LV/MV电缆 | Guide for procurement - Electrical equipment - LV/MV cables |
prEN 4604-001-2002 | 航空航天系列 信号传输用电缆 第001部分:技术规范 | Aerospace series - Cable, electrical, for signal transmission - Part 001: Technical specification |
prEN 4604-002-2002 | 航空航天系列 信号传输用电缆 第002部分:总则 | Aerospace series - Cable, electrical, for signal transmission - Part 002: General |
prEN 4604-003-2002 | 航空航天系列 信号传输用电缆 第003部分:50 欧姆、200度、WZ型同轴电缆 产品标准 | Aerospace series - Cable, electrical, for signal transmission - Part 003: Coaxial cable 50 Ohm, 200℃, type WZ; Product standard |
prEN 4604-004-2002 | 航空航天系列 信号传输用电缆 第004部分:耐扰性、50 欧姆、200度、WS型微型同轴电缆 产品标准 | Aerospace series - Cable, electrical, for signal transmission - Part 004: Cable, microcoaxial, high immunity, 50 Ohms, 200℃, type WS; Product standard |
prEN 4604-005-2001 | 航空航天系列 信号传输用电缆 第005部分:75 欧姆、200度、WL型同轴电缆 产品标准 | Aerospace series - Cable, electrical, for signal transmission - Part 005: Cable, coaxial, 75 Ohms, 200℃, type WL; Product standard |
prEN 4604-006-2002 | 航空航天系列 信号传输用电缆 第006部分:50 欧姆、200度、WM型同轴电缆 产品标准 | Aerospace series - Cable, electrical, for signal transmission - Part 006: Cable, coaxial, 50 Ohms, 200℃, type WM; Product standard |
prEN 4604-007-2002 | 航空航天系列 信号传输用电缆 第007部分:50 欧姆、200度、WN型同轴电缆 产品标准 | Aerospace series - Cable, electrical, for signal transmission - Part 007: Cable, coaxial, 50 Ohms, 200℃, type WN; Product standard |
prEN 474-12-1998 | 土方机械 安全 第12部分:电缆沟开凿机要求 | Earth-moving machinery - Safety - Part 12: Requirements for cable excavators |
prEN 50085-2-1-2002 | 电气装置用电缆槽和电缆管道系统 第2-1部分:安装在墙上或天花板上的电缆槽和电缆管道系统的特殊要求 | Cable trunking and cable ducting systems for electrical installations - Part 2-1: Particular requirements for cable trunking systems and cable ducting systems intended for mounting on walls and/or ceilings |
prEN 50090-9-1-2003 | 家用和建筑物电子系统(HBES) 第9-1部分:安装要求 通用的HBES一级双绞线敷设电缆 | Home and Building Electronic Systems (HBES) - Part 9-1: Installation requirements; Generic cabling for HBES class 1 twisted pair |
prEN 50118-1993 | 家用及类似目的使用的电缆盘(IEC 23B(秘书处)323) | Cable reels for household and similar purposes (IEC 23B(Secretariat)323) |
prEN 50174-3-2003 | 信息技术信息技术 铺设电缆装置 第3部分::建筑物外部设施安装的规划及实践 | Information technology - Cabling installation - Part 3: Installation planning and practices outside buildings |
prEN 50290-1-2-1999 | 通信电缆 第1-2部分:通用的设计原理及结构 定义 | Communication cables - Part 1-2: Definitions |
prEN 50290-2-1-2002 | 通信电缆 第2-1部分:通用的设计原理及结构 | Communication cables - Part 2-1: Common design rules and construction / Note: Applies in conjunction with EN 50290-1-1 |
prEN 50290-3-1999 | 通信电缆 第3部分:质量评定 | Communication cables - Part 3: Quality assessment |
prEN 50369-2003 | 电缆的液封外壳系统 | Liquid tight sheathing systems for cable management |
prEN 6049-001-2001 | 航空航天系列 设备电缆 偏聚酸胺纤维保护套 第001部分:技术规范 | Aerospace series - Electrical cables, installation; Protection sleeve in meta-aramid fibres - Part 001: Technical specification |
prEN 6049-006-2001 | 航空航天系列 设备电缆 偏聚酸胺纤维保护套 第006部分:自动包装保护套 易弯曲接线端装置 产品标准 | Aerospace series - Electrical cables, installation; Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation; Product standard |
prEN 6059-100-2001 | 航空航天系列 设备电缆 保护套 试验方法 第100部分:总则 | Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 100: General |
prEN 6059-303-2001 | 航空航天系列 设备电缆 保护套 试验方法 第303部分:耐流体性 | Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 303: Resistance to fluids |
prEN 6059-406-2001 | 航空航天系列 设备电缆 保护套 试验方法 第406部分:振动 | Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 406: Vibration |
prEN 60728-6-2003 | 电视信号的电缆网络 声音信号交互服务 第6部分:光学装置 | IEC 60728-6: Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
prEN 60794-4-1-1998 | 光学纤维电缆 第4-1部分:高压输电线架空电缆 | IEC 60794-4-1: Optical fibre cables - Part 4-1: Aerial optical cables for high voltage power lines |
prEN 60794-4-2003 | 光学纤维电缆 第4部分:高压输电线架空电缆 | IEC 60794-4, Ed. 2.0: Optical fibre cables - Part 4: Sectional specification; Aerial optical cables along electrical power lines |
prEN 61156-1991 | 数字通信用对绞或星绞多芯对称电缆的通用规范 | Draft IEC 61156: generic specification for multicore and symmetrical pair/quad cables for digital communications |
prEN 61279-1993 | 分规范 光学电信电缆 | IEC 61279; sectional specification; optical telecommunication cables |
prHD 359 S3-1993 | 聚氯乙烯护套扁式软电缆 | Flat polyvinyl chloride sheathed flexible cables |
prHD 361 S3-1998 | 电缆设备系统 | System for cable designation |
编号 | 中文名称 | 英文名称 |
仪器商城:www.17-18.cn
安规仪器网/美华安规仪器---追崇原创、重视知识产权和尊重劳动成果,也是行业发展主旨,禁止盗链、采集、复制及转载等非法行为,一经发现保留追责权力。有关标准和技术探讨,请联络邮箱:1484875858#qq.com(#改为@),QQ1484875858